esp-idf/components/esp_wifi/include/esp_smartconfig.h

164 lines
5.3 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SMARTCONFIG_H__
#define __ESP_SMARTCONFIG_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "esp_event_base.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
SC_TYPE_ESPTOUCH = 0, /**< protocol: ESPTouch */
SC_TYPE_AIRKISS, /**< protocol: AirKiss */
SC_TYPE_ESPTOUCH_AIRKISS, /**< protocol: ESPTouch and AirKiss */
SC_TYPE_ESPTOUCH_V2, /**< protocol: ESPTouch v2*/
} smartconfig_type_t;
/** Smartconfig event declarations */
typedef enum {
SC_EVENT_SCAN_DONE, /*!< ESP32 station smartconfig has finished to scan for APs */
SC_EVENT_FOUND_CHANNEL, /*!< ESP32 station smartconfig has found the channel of the target AP */
SC_EVENT_GOT_SSID_PSWD, /*!< ESP32 station smartconfig got the SSID and password */
SC_EVENT_SEND_ACK_DONE, /*!< ESP32 station smartconfig has sent ACK to cellphone */
} smartconfig_event_t;
/** @brief smartconfig event base declaration */
ESP_EVENT_DECLARE_BASE(SC_EVENT);
/** Argument structure for SC_EVENT_GOT_SSID_PSWD event */
typedef struct {
uint8_t ssid[32]; /**< SSID of the AP. Null terminated string. */
uint8_t password[64]; /**< Password of the AP. Null terminated string. */
bool bssid_set; /**< whether set MAC address of target AP or not. */
uint8_t bssid[6]; /**< MAC address of target AP. */
smartconfig_type_t type; /**< Type of smartconfig(ESPTouch or AirKiss). */
uint8_t token; /**< Token from cellphone which is used to send ACK to cellphone. */
uint8_t cellphone_ip[4]; /**< IP address of cellphone. */
} smartconfig_event_got_ssid_pswd_t;
/** Configure structure for esp_smartconfig_start */
typedef struct {
bool enable_log; /**< Enable smartconfig logs. */
bool esp_touch_v2_enable_crypt; /**< Enable ESPTouch v2 crypt. */
char *esp_touch_v2_key; /**< ESPTouch v2 crypt key, len should be 16. */
} smartconfig_start_config_t;
#define SMARTCONFIG_START_CONFIG_DEFAULT() { \
.enable_log = false, \
.esp_touch_v2_enable_crypt = false,\
.esp_touch_v2_key = NULL \
};
/**
* @brief Get the version of SmartConfig.
*
* @return
* - SmartConfig version const char.
*/
const char *esp_smartconfig_get_version(void);
/**
* @brief Start SmartConfig, config ESP device to connect AP. You need to broadcast information by phone APP.
* Device sniffer special packets from the air that containing SSID and password of target AP.
*
* @attention 1. This API can be called in station or softAP-station mode.
* @attention 2. Can not call esp_smartconfig_start twice before it finish, please call
* esp_smartconfig_stop first.
*
* @param config pointer to smartconfig start configure structure
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_smartconfig_start(const smartconfig_start_config_t *config);
/**
* @brief Stop SmartConfig, free the buffer taken by esp_smartconfig_start.
*
* @attention Whether connect to AP succeed or not, this API should be called to free
* memory taken by smartconfig_start.
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_smartconfig_stop(void);
/**
* @brief Set timeout of SmartConfig process.
*
* @attention Timing starts from SC_STATUS_FIND_CHANNEL status. SmartConfig will restart if timeout.
*
* @param time_s range 15s~255s, offset:45s.
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_esptouch_set_timeout(uint8_t time_s);
/**
* @brief Set protocol type of SmartConfig.
*
* @attention If users need to set the SmartConfig type, please set it before calling
* esp_smartconfig_start.
*
* @param type Choose from the smartconfig_type_t.
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_smartconfig_set_type(smartconfig_type_t type);
/**
* @brief Set mode of SmartConfig. default normal mode.
*
* @attention 1. Please call it before API esp_smartconfig_start.
* @attention 2. Fast mode have corresponding APP(phone).
* @attention 3. Two mode is compatible.
*
* @param enable false-disable(default); true-enable;
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_smartconfig_fast_mode(bool enable);
/**
* @brief Get reserved data of ESPTouch v2.
*
* @param rvd_data reserved data
* @param len length of reserved data
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_smartconfig_get_rvd_data(uint8_t *rvd_data, uint8_t len);
#ifdef __cplusplus
}
#endif
#endif