alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-21 06:56:11 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
b6fda9723e
esp-idf/examples/bluetooth/bluedroid/ble_50/multi-adv
History
Jiang Jiang Jian b6fda9723e Merge branch 'bugfix/fix_att_rsp_timeout' into 'master' 
Fixed bluedroid host ATT Ignore wrong response error

Closes BLEQABR23-30 and BT-3224

See merge request espressif/esp-idf!22688
2023-03-23 17:10:54 +08:00
..
main set BT_CTRL_BLE_MAX_ACT default value to 6 2023-03-20 15:54:47 +08:00
tutorial Readme for the bluedroid ble50 example with tutorial of walkthrough example. 2021-11-19 12:04:47 +05:30
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md ble: Update README files for bluedroid host examples on ESP32-H2 2023-03-20 19:09:29 +08:00
sdkconfig.defaults modify bt sdkconfig to support bluedroid examples for esp32c6 2023-01-13 15:05:34 +08:00
sdkconfig.defaults.esp32c2 esp32c6: add spi_flash support 2022-09-26 20:32:13 +08:00
sdkconfig.defaults.esp32c3 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 2022-08-09 16:28:01 +00:00
sdkconfig.defaults.esp32h4 esp32h2: renaming esp32h2 to esp32h4 2022-11-08 17:05:33 +08:00
sdkconfig.defaults.esp32s3 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 2022-08-09 16:28:01 +00:00

README.md

Supported Targets ESP32-C3 ESP32-C6 ESP32-H2 ESP32-H4 ESP32-S3

#ESP-IDF Multi Adv Example

This example support legacy as well as extended advertisement for all phy.

Please, check this tutorial for more information about this example.

How to Use Example

Before project configuration and build, be sure to set the correct chip target using:

idf.py set-target <chip_name>

Hardware Required

  • A development board with ESP32-C3 SoC,ESP32-S3/ESP32-H4/ESP32-C2 SoC and BLE5.0 supported chips (e.g., ESP32-C3-DevKitC, etc.)
  • A USB cable for Power supply and programming

See Development Boards for more information about it.

Build and Flash

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (361) BTDM_INIT: BT controller compile version [3e61eea]
I (371) coexist: coexist rom version 8459080
I (371) phy_init: phy_version 500,985899c,Apr 19 2021,16:05:08
I (491) system_api: Base MAC address is not set
I (491) system_api: read default base MAC address from EFUSE
I (491) BTDM_INIT: Bluetooth MAC: 7c:df:a1:40:01:c5

I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_DATA_SET_COMPLETE_EVT, status 0
I (721) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (731) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (741) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (741) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (751) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (761) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_DATA_SET_COMPLETE_EVT, status 0
I (771) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (781) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (781) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (791) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (801) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_START_COMPLETE_EVT, status 0

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.