esp-idf/components/esp_wifi/include/esp_wifi.h

1479 lines
58 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/* Notes about WiFi Programming
*
* WiFi programming model can be depicted as following picture:
*
*
* default handler user handler
* ------------- --------------- ---------------
* | | event | | callback or | |
* | tcpip | ---------> | event | ----------> | application |
* | stack | | task | event | task |
* |-----------| |-------------| |-------------|
* /|\ |
* | |
* event | |
* | |
* | |
* --------------- |
* | | |
* | WiFi Driver |/__________________|
* | |\ API call
* | |
* |-------------|
*
* The WiFi driver can be consider as black box, it knows nothing about the high layer code, such as
* TCPIP stack, application task, event task etc, all it can do is to receive API call from high layer
* or post event queue to a specified Queue, which is initialized by API esp_wifi_init().
*
* The event task is a daemon task, which receives events from WiFi driver or from other subsystem, such
* as TCPIP stack, event task will call the default callback function on receiving the event. For example,
* on receiving event WIFI_EVENT_STA_CONNECTED, it will call esp_netif API to start the DHCP
* client in it's default handler.
*
* Application can register it's own event callback function by API esp_event_init, then the application callback
* function will be called after the default callback. Also, if application doesn't want to execute the callback
* in the event task, what it needs to do is to post the related event to application task in the application callback function.
*
* The application task (code) generally mixes all these thing together, it calls APIs to init the system/WiFi and
* handle the events when necessary.
*
*/
#ifndef __ESP_WIFI_H__
#define __ESP_WIFI_H__
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "esp_wifi_types.h"
#include "esp_event.h"
#include "esp_private/esp_wifi_private.h"
#include "esp_wifi_default.h"
#ifdef __cplusplus
extern "C" {
#endif
#define ESP_ERR_WIFI_NOT_INIT (ESP_ERR_WIFI_BASE + 1) /*!< WiFi driver was not installed by esp_wifi_init */
#define ESP_ERR_WIFI_NOT_STARTED (ESP_ERR_WIFI_BASE + 2) /*!< WiFi driver was not started by esp_wifi_start */
#define ESP_ERR_WIFI_NOT_STOPPED (ESP_ERR_WIFI_BASE + 3) /*!< WiFi driver was not stopped by esp_wifi_stop */
#define ESP_ERR_WIFI_IF (ESP_ERR_WIFI_BASE + 4) /*!< WiFi interface error */
#define ESP_ERR_WIFI_MODE (ESP_ERR_WIFI_BASE + 5) /*!< WiFi mode error */
#define ESP_ERR_WIFI_STATE (ESP_ERR_WIFI_BASE + 6) /*!< WiFi internal state error */
#define ESP_ERR_WIFI_CONN (ESP_ERR_WIFI_BASE + 7) /*!< WiFi internal control block of station or soft-AP error */
#define ESP_ERR_WIFI_NVS (ESP_ERR_WIFI_BASE + 8) /*!< WiFi internal NVS module error */
#define ESP_ERR_WIFI_MAC (ESP_ERR_WIFI_BASE + 9) /*!< MAC address is invalid */
#define ESP_ERR_WIFI_SSID (ESP_ERR_WIFI_BASE + 10) /*!< SSID is invalid */
#define ESP_ERR_WIFI_PASSWORD (ESP_ERR_WIFI_BASE + 11) /*!< Password is invalid */
#define ESP_ERR_WIFI_TIMEOUT (ESP_ERR_WIFI_BASE + 12) /*!< Timeout error */
#define ESP_ERR_WIFI_WAKE_FAIL (ESP_ERR_WIFI_BASE + 13) /*!< WiFi is in sleep state(RF closed) and wakeup fail */
#define ESP_ERR_WIFI_WOULD_BLOCK (ESP_ERR_WIFI_BASE + 14) /*!< The caller would block */
#define ESP_ERR_WIFI_NOT_CONNECT (ESP_ERR_WIFI_BASE + 15) /*!< Station still in disconnect status */
#define ESP_ERR_WIFI_POST (ESP_ERR_WIFI_BASE + 18) /*!< Failed to post the event to WiFi task */
#define ESP_ERR_WIFI_INIT_STATE (ESP_ERR_WIFI_BASE + 19) /*!< Invalid WiFi state when init/deinit is called */
#define ESP_ERR_WIFI_STOP_STATE (ESP_ERR_WIFI_BASE + 20) /*!< Returned when WiFi is stopping */
#define ESP_ERR_WIFI_NOT_ASSOC (ESP_ERR_WIFI_BASE + 21) /*!< The WiFi connection is not associated */
#define ESP_ERR_WIFI_TX_DISALLOW (ESP_ERR_WIFI_BASE + 22) /*!< The WiFi TX is disallowed */
#define ESP_ERR_WIFI_TWT_FULL (ESP_ERR_WIFI_BASE + 23) /*!< no available flow id */
#define ESP_ERR_WIFI_TWT_SETUP_TIMEOUT (ESP_ERR_WIFI_BASE + 24) /*!< Timeout of receiving twt setup response frame, timeout times can be set during twt setup */
#define ESP_ERR_WIFI_TWT_SETUP_TXFAIL (ESP_ERR_WIFI_BASE + 25) /*!< TWT setup frame tx failed */
#define ESP_ERR_WIFI_TWT_SETUP_REJECT (ESP_ERR_WIFI_BASE + 26) /*!< The twt setup request was rejected by the AP */
#define ESP_ERR_WIFI_DISCARD (ESP_ERR_WIFI_BASE + 27) /*!< Discard frame */
#define ESP_ERR_WIFI_ROC_IN_PROGRESS (ESP_ERR_WIFI_BASE + 28) /*!< ROC op is in progress */
/**
* @brief WiFi stack configuration parameters passed to esp_wifi_init call.
*/
typedef struct {
wifi_osi_funcs_t* osi_funcs; /**< WiFi OS functions */
wpa_crypto_funcs_t wpa_crypto_funcs; /**< WiFi station crypto functions when connect */
int static_rx_buf_num; /**< WiFi static RX buffer number */
int dynamic_rx_buf_num; /**< WiFi dynamic RX buffer number */
int tx_buf_type; /**< WiFi TX buffer type */
int static_tx_buf_num; /**< WiFi static TX buffer number */
int dynamic_tx_buf_num; /**< WiFi dynamic TX buffer number */
int rx_mgmt_buf_type; /**< WiFi RX MGMT buffer type */
int rx_mgmt_buf_num; /**< WiFi RX MGMT buffer number */
int cache_tx_buf_num; /**< WiFi TX cache buffer number */
int csi_enable; /**< WiFi channel state information enable flag */
int ampdu_rx_enable; /**< WiFi AMPDU RX feature enable flag */
int ampdu_tx_enable; /**< WiFi AMPDU TX feature enable flag */
int amsdu_tx_enable; /**< WiFi AMSDU TX feature enable flag */
int nvs_enable; /**< WiFi NVS flash enable flag */
int nano_enable; /**< Nano option for printf/scan family enable flag */
int rx_ba_win; /**< WiFi Block Ack RX window size */
int wifi_task_core_id; /**< WiFi Task Core ID */
int beacon_max_len; /**< WiFi softAP maximum length of the beacon */
int mgmt_sbuf_num; /**< WiFi management short buffer number, the minimum value is 6, the maximum value is 32 */
uint64_t feature_caps; /**< Enables additional WiFi features and capabilities */
bool sta_disconnected_pm; /**< WiFi Power Management for station at disconnected status */
int espnow_max_encrypt_num; /**< Maximum encrypt number of peers supported by espnow */
int magic; /**< WiFi init magic number, it should be the last field */
} wifi_init_config_t;
#ifdef CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM
#define WIFI_STATIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM
#else
#define WIFI_STATIC_TX_BUFFER_NUM 0
#endif
#if CONFIG_SPIRAM
#define WIFI_CACHE_TX_BUFFER_NUM CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM
#else
#define WIFI_CACHE_TX_BUFFER_NUM 0
#endif
#ifdef CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM
#define WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM
#else
#define WIFI_DYNAMIC_TX_BUFFER_NUM 0
#endif
#ifdef CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF
#define WIFI_RX_MGMT_BUF_NUM_DEF CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF
#else
#define WIFI_RX_MGMT_BUF_NUM_DEF 0
#endif
#if CONFIG_ESP_WIFI_CSI_ENABLED
#define WIFI_CSI_ENABLED 1
#else
#define WIFI_CSI_ENABLED 0
#endif
#if CONFIG_ESP_WIFI_AMPDU_RX_ENABLED
#define WIFI_AMPDU_RX_ENABLED 1
#else
#define WIFI_AMPDU_RX_ENABLED 0
#endif
#if CONFIG_ESP_WIFI_AMPDU_TX_ENABLED
#define WIFI_AMPDU_TX_ENABLED 1
#else
#define WIFI_AMPDU_TX_ENABLED 0
#endif
#if CONFIG_ESP_WIFI_AMSDU_TX_ENABLED
#define WIFI_AMSDU_TX_ENABLED 1
#else
#define WIFI_AMSDU_TX_ENABLED 0
#endif
#if CONFIG_ESP_WIFI_NVS_ENABLED
#define WIFI_NVS_ENABLED 1
#else
#define WIFI_NVS_ENABLED 0
#endif
#if CONFIG_NEWLIB_NANO_FORMAT
#define WIFI_NANO_FORMAT_ENABLED 1
#else
#define WIFI_NANO_FORMAT_ENABLED 0
#endif
extern const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs;
#define WIFI_INIT_CONFIG_MAGIC 0x1F2F3F4F
#ifdef CONFIG_ESP_WIFI_AMPDU_RX_ENABLED
#define WIFI_DEFAULT_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN
#else
#define WIFI_DEFAULT_RX_BA_WIN 0 /* unused if ampdu_rx_enable == false */
#endif
#if CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1
#define WIFI_TASK_CORE_ID 1
#else
#define WIFI_TASK_CORE_ID 0
#endif
#ifdef CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN
#define WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN
#else
#define WIFI_SOFTAP_BEACON_MAX_LEN 752
#endif
#ifdef CONFIG_ESP_WIFI_MGMT_SBUF_NUM
#define WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM
#else
#define WIFI_MGMT_SBUF_NUM 32
#endif
#if CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE
#define WIFI_STA_DISCONNECTED_PM_ENABLED true
#else
#define WIFI_STA_DISCONNECTED_PM_ENABLED false
#endif
#if CONFIG_ESP_WIFI_ENABLE_WPA3_SAE
#define WIFI_ENABLE_WPA3_SAE (1<<0)
#else
#define WIFI_ENABLE_WPA3_SAE 0
#endif
#if CONFIG_SPIRAM
#define WIFI_ENABLE_SPIRAM (1<<1)
#else
#define WIFI_ENABLE_SPIRAM 0
#endif
#if CONFIG_ESP_WIFI_FTM_INITIATOR_SUPPORT
#define WIFI_FTM_INITIATOR (1<<2)
#else
#define WIFI_FTM_INITIATOR 0
#endif
#if CONFIG_ESP_WIFI_FTM_RESPONDER_SUPPORT
#define WIFI_FTM_RESPONDER (1<<3)
#else
#define WIFI_FTM_RESPONDER 0
#endif
#define CONFIG_FEATURE_WPA3_SAE_BIT (1<<0)
#define CONFIG_FEATURE_CACHE_TX_BUF_BIT (1<<1)
#define CONFIG_FEATURE_FTM_INITIATOR_BIT (1<<2)
#define CONFIG_FEATURE_FTM_RESPONDER_BIT (1<<3)
/* Set additional WiFi features and capabilities */
#define WIFI_FEATURE_CAPS (WIFI_ENABLE_WPA3_SAE | \
WIFI_ENABLE_SPIRAM | \
WIFI_FTM_INITIATOR | \
WIFI_FTM_RESPONDER)
#define WIFI_INIT_CONFIG_DEFAULT() { \
.osi_funcs = &g_wifi_osi_funcs, \
.wpa_crypto_funcs = g_wifi_default_wpa_crypto_funcs, \
.static_rx_buf_num = CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM,\
.dynamic_rx_buf_num = CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM,\
.tx_buf_type = CONFIG_ESP_WIFI_TX_BUFFER_TYPE,\
.static_tx_buf_num = WIFI_STATIC_TX_BUFFER_NUM,\
.dynamic_tx_buf_num = WIFI_DYNAMIC_TX_BUFFER_NUM,\
.rx_mgmt_buf_type = CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF,\
.rx_mgmt_buf_num = WIFI_RX_MGMT_BUF_NUM_DEF,\
.cache_tx_buf_num = WIFI_CACHE_TX_BUFFER_NUM,\
.csi_enable = WIFI_CSI_ENABLED,\
.ampdu_rx_enable = WIFI_AMPDU_RX_ENABLED,\
.ampdu_tx_enable = WIFI_AMPDU_TX_ENABLED,\
.amsdu_tx_enable = WIFI_AMSDU_TX_ENABLED,\
.nvs_enable = WIFI_NVS_ENABLED,\
.nano_enable = WIFI_NANO_FORMAT_ENABLED,\
.rx_ba_win = WIFI_DEFAULT_RX_BA_WIN,\
.wifi_task_core_id = WIFI_TASK_CORE_ID,\
.beacon_max_len = WIFI_SOFTAP_BEACON_MAX_LEN, \
.mgmt_sbuf_num = WIFI_MGMT_SBUF_NUM, \
.feature_caps = WIFI_FEATURE_CAPS, \
.sta_disconnected_pm = WIFI_STA_DISCONNECTED_PM_ENABLED, \
.espnow_max_encrypt_num = CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM, \
.magic = WIFI_INIT_CONFIG_MAGIC\
}
/**
* @brief Initialize WiFi
* Allocate resource for WiFi driver, such as WiFi control structure, RX/TX buffer,
* WiFi NVS structure etc. This WiFi also starts WiFi task
*
* @attention 1. This API must be called before all other WiFi API can be called
* @attention 2. Always use WIFI_INIT_CONFIG_DEFAULT macro to initialize the configuration to default values, this can
* guarantee all the fields get correct value when more fields are added into wifi_init_config_t
* in future release. If you want to set your own initial values, overwrite the default values
* which are set by WIFI_INIT_CONFIG_DEFAULT. Please be notified that the field 'magic' of
* wifi_init_config_t should always be WIFI_INIT_CONFIG_MAGIC!
*
* @param config pointer to WiFi initialized configuration structure; can point to a temporary variable.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_NO_MEM: out of memory
* - others: refer to error code esp_err.h
*/
esp_err_t esp_wifi_init(const wifi_init_config_t *config);
/**
* @brief Deinit WiFi
* Free all resource allocated in esp_wifi_init and stop WiFi task
*
* @attention 1. This API should be called if you want to remove WiFi driver from the system
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_deinit(void);
/**
* @brief Set the WiFi operating mode
*
* Set the WiFi operating mode as station, soft-AP, station+soft-AP or NAN.
* The default mode is station mode.
*
* @param mode WiFi operating mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - others: refer to error code in esp_err.h
*/
esp_err_t esp_wifi_set_mode(wifi_mode_t mode);
/**
* @brief Get current operating mode of WiFi
*
* @param[out] mode store current WiFi mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_mode(wifi_mode_t *mode);
/**
* @brief Start WiFi according to current configuration
* If mode is WIFI_MODE_STA, it creates station control block and starts station
* If mode is WIFI_MODE_AP, it creates soft-AP control block and starts soft-AP
* If mode is WIFI_MODE_APSTA, it creates soft-AP and station control block and starts soft-AP and station
* If mode is WIFI_MODE_NAN, it creates NAN control block and starts NAN
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_NO_MEM: out of memory
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
* - ESP_FAIL: other WiFi internal errors
*/
esp_err_t esp_wifi_start(void);
/**
* @brief Stop WiFi
* If mode is WIFI_MODE_STA, it stops station and frees station control block
* If mode is WIFI_MODE_AP, it stops soft-AP and frees soft-AP control block
* If mode is WIFI_MODE_APSTA, it stops station/soft-AP and frees station/soft-AP control block
* If mode is WIFI_MODE_NAN, it stops NAN and frees NAN control block
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_stop(void);
/**
* @brief Restore WiFi stack persistent settings to default values
*
* This function will reset settings made using the following APIs:
* - esp_wifi_set_bandwidth,
* - esp_wifi_set_protocol,
* - esp_wifi_set_config related
* - esp_wifi_set_mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_restore(void);
/**
* @brief Connect WiFi station to the AP.
*
* @attention 1. This API only impact WIFI_MODE_STA or WIFI_MODE_APSTA mode
* @attention 2. If station interface is connected to an AP, call esp_wifi_disconnect to disconnect.
* @attention 3. The scanning triggered by esp_wifi_scan_start() will not be effective until connection between device and the AP is established.
* If device is scanning and connecting at the same time, it will abort scanning and return a warning message and error
* number ESP_ERR_WIFI_STATE.
* @attention 4. This API attempts to connect to an Access Point (AP) only once. To enable reconnection in case of a connection failure, please use
* the 'failure_retry_cnt' feature in the 'wifi_sta_config_t'. Users are suggested to implement reconnection logic in their application
* for scenarios where the specified AP does not exist, or reconnection is desired after the device has received a disconnect event.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
* - ESP_ERR_WIFI_SSID: SSID of AP which station connects is invalid
*/
esp_err_t esp_wifi_connect(void);
/**
* @brief Disconnect WiFi station from the AP.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi was not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
* - ESP_FAIL: other WiFi internal errors
*/
esp_err_t esp_wifi_disconnect(void);
/**
* @brief Currently this API is just an stub API
*
* @return
* - ESP_OK: succeed
* - others: fail
*/
esp_err_t esp_wifi_clear_fast_connect(void);
/**
* @brief deauthenticate all stations or associated id equals to aid
*
* @param aid when aid is 0, deauthenticate all stations, otherwise deauthenticate station whose associated id is aid
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
*/
esp_err_t esp_wifi_deauth_sta(uint16_t aid);
/**
* @brief Scan all available APs.
*
* @attention If this API is called, the found APs are stored in WiFi driver dynamic allocated memory. And then
* can be freed in esp_wifi_scan_get_ap_records(), esp_wifi_scan_get_ap_record() or esp_wifi_clear_ap_list(),
* so call any one to free the memory once the scan is done.
* @attention The values of maximum active scan time and passive scan time per channel are limited to 1500 milliseconds.
* Values above 1500ms may cause station to disconnect from AP and are not recommended.
*
* @param config configuration settings for scanning, if set to NULL default settings will be used
* of which default values are show_hidden:false, scan_type:active, scan_time.active.min:0,
* scan_time.active.max:120 miliseconds, scan_time.passive:360 miliseconds
*
* @param block if block is true, this API will block the caller until the scan is done, otherwise
* it will return immediately
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
* - ESP_ERR_WIFI_TIMEOUT: blocking scan is timeout
* - ESP_ERR_WIFI_STATE: wifi still connecting when invoke esp_wifi_scan_start
* - others: refer to error code in esp_err.h
*/
esp_err_t esp_wifi_scan_start(const wifi_scan_config_t *config, bool block);
/**
* @brief Stop the scan in process
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
*/
esp_err_t esp_wifi_scan_stop(void);
/**
* @brief Get number of APs found in last scan
*
* @param[out] number store number of APs found in last scan
*
* @attention This API can only be called when the scan is completed, otherwise it may get wrong value.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_scan_get_ap_num(uint16_t *number);
/**
* @brief Get AP list found in last scan.
*
* @attention This API will free all memory occupied by scanned AP list.
*
* @param[inout] number As input param, it stores max AP number ap_records can hold.
* As output param, it receives the actual AP number this API returns.
* @param ap_records wifi_ap_record_t array to hold the found APs
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_NO_MEM: out of memory
*/
esp_err_t esp_wifi_scan_get_ap_records(uint16_t *number, wifi_ap_record_t *ap_records);
/**
* @brief Get one AP record from the scanned AP list.
*
* @attention Different from esp_wifi_scan_get_ap_records(), this API only gets one AP record
* from the scanned AP list each time. This API will free the memory of one AP record,
* if the user doesn't get all records in the scannned AP list, then needs to call esp_wifi_clear_ap_list()
* to free the remaining memory.
*
* @param[out] ap_record pointer to one AP record
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_FAIL: scan APs is NULL, means all AP records fetched or no AP found
*/
esp_err_t esp_wifi_scan_get_ap_record(wifi_ap_record_t *ap_record);
/**
* @brief Clear AP list found in last scan
*
* @attention This API will free all memory occupied by scanned AP list.
* When the obtained AP list fails, AP records must be cleared,otherwise it may cause memory leakage.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_clear_ap_list(void);
/**
* @brief Get information of AP to which the device is associated with
*
* @attention When the obtained country information is empty, it means that the AP does not carry country information
*
* @param ap_info the wifi_ap_record_t to hold AP information
* sta can get the connected ap's phy mode info through the struct member
* phy_11bphy_11gphy_11nphy_lr in the wifi_ap_record_t struct.
* For example, phy_11b = 1 imply that ap support 802.11b mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_CONN: The station interface don't initialized
* - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status
*/
esp_err_t esp_wifi_sta_get_ap_info(wifi_ap_record_t *ap_info);
/**
* @brief Set current WiFi power save type
*
* @attention Default power save type is WIFI_PS_MIN_MODEM.
*
* @param type power save type
*
* @return ESP_OK: succeed
*/
esp_err_t esp_wifi_set_ps(wifi_ps_type_t type);
/**
* @brief Get current WiFi power save type
*
* @attention Default power save type is WIFI_PS_MIN_MODEM.
*
* @param[out] type: store current power save type
*
* @return ESP_OK: succeed
*/
esp_err_t esp_wifi_get_ps(wifi_ps_type_t *type);
/**
* @brief Set protocol type of specified interface
* The default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N).
* if CONFIG_SOC_WIFI_HE_SUPPORT, the default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AX).
*
* @attention Support 802.11b or 802.11bg or 802.11bgn or 802.11bgnax or LR mode
*
* @param ifx interfaces
* @param protocol_bitmap WiFi protocol bitmap
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_IF: invalid interface
* - others: refer to error codes in esp_err.h
*/
esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap);
/**
* @brief Get the current protocol bitmap of the specified interface
*
* @param ifx interface
* @param[out] protocol_bitmap store current WiFi protocol bitmap of interface ifx
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_INVALID_ARG: invalid argument
* - others: refer to error codes in esp_err.h
*/
esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap);
/**
* @brief Set the bandwidth of specified interface
*
* @attention 1. API return false if try to configure an interface that is not enabled
* @attention 2. WIFI_BW_HT40 is supported only when the interface support 11N
*
* @param ifx interface to be configured
* @param bw bandwidth
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_INVALID_ARG: invalid argument
* - others: refer to error codes in esp_err.h
*/
esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw);
/**
* @brief Get the bandwidth of specified interface
*
* @attention 1. API return false if try to get a interface that is not enable
*
* @param ifx interface to be configured
* @param[out] bw store bandwidth of interface ifx
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw);
/**
* @brief Set primary/secondary channel of device
*
* @attention 1. This API should be called after esp_wifi_start() and before esp_wifi_stop()
* @attention 2. When device is in STA mode, this API should not be called when STA is scanning or connecting to an external AP
* @attention 3. When device is in softAP mode, this API should not be called when softAP has connected to external STAs
* @attention 4. When device is in STA+softAP mode, this API should not be called when in the scenarios described above
* @attention 5. The channel info set by this API will not be stored in NVS. So If you want to remeber the channel used before wifi stop,
* you need to call this API again after wifi start, or you can call `esp_wifi_set_config()` to store the channel info in NVS.
*
* @param primary for HT20, primary is the channel number, for HT40, primary is the primary channel
* @param second for HT20, second is ignored, for HT40, second is the second channel
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
*/
esp_err_t esp_wifi_set_channel(uint8_t primary, wifi_second_chan_t second);
/**
* @brief Get the primary/secondary channel of device
*
* @attention 1. API return false if try to get a interface that is not enable
*
* @param primary store current primary channel
* @param[out] second store current second channel
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_channel(uint8_t *primary, wifi_second_chan_t *second);
/**
* @brief configure country info
*
* @attention 1. It is discouraged to call this API since this doesn't validate the per-country rules,
* it's up to the user to fill in all fields according to local regulations.
* Please use esp_wifi_set_country_code instead.
* @attention 2. The default country is "01" (world safe mode) {.cc="01", .schan=1, .nchan=11, .policy=WIFI_COUNTRY_POLICY_AUTO}.
* @attention 3. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '.
* @attention 4. When the country policy is WIFI_COUNTRY_POLICY_AUTO, the country info of the AP to which
* the station is connected is used. E.g. if the configured country info is {.cc="US", .schan=1, .nchan=11}
* and the country info of the AP to which the station is connected is {.cc="JP", .schan=1, .nchan=14}
* then the country info that will be used is {.cc="JP", .schan=1, .nchan=14}. If the station disconnected
* from the AP the country info is set back to the country info of the station automatically,
* {.cc="US", .schan=1, .nchan=11} in the example.
* @attention 5. When the country policy is WIFI_COUNTRY_POLICY_MANUAL, then the configured country info is used always.
* @attention 6. When the country info is changed because of configuration or because the station connects to a different
* external AP, the country IE in probe response/beacon of the soft-AP is also changed.
* @attention 7. The country configuration is stored into flash.
* @attention 8. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the
* country info.
*
* @param country the configured country info
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_country(const wifi_country_t *country);
/**
* @brief get the current country info
*
* @param country country info
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_country(wifi_country_t *country);
/**
* @brief Set MAC address of WiFi station, soft-AP or NAN interface.
*
* @attention 1. This API can only be called when the interface is disabled
* @attention 2. Above mentioned interfaces have different MAC addresses, do not set them to be the same.
* @attention 3. The bit 0 of the first byte of MAC address can not be 1. For example, the MAC address
* can set to be "1a:XX:XX:XX:XX:XX", but can not be "15:XX:XX:XX:XX:XX".
*
* @param ifx interface
* @param mac the MAC address
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_WIFI_MAC: invalid mac address
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
* - others: refer to error codes in esp_err.h
*/
esp_err_t esp_wifi_set_mac(wifi_interface_t ifx, const uint8_t mac[6]);
/**
* @brief Get mac of specified interface
*
* @param ifx interface
* @param[out] mac store mac of the interface ifx
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_IF: invalid interface
*/
esp_err_t esp_wifi_get_mac(wifi_interface_t ifx, uint8_t mac[6]);
/**
* @brief The RX callback function in the promiscuous mode.
* Each time a packet is received, the callback function will be called.
*
* @param buf Data received. Type of data in buffer (wifi_promiscuous_pkt_t or wifi_pkt_rx_ctrl_t) indicated by 'type' parameter.
* @param type promiscuous packet type.
*
*/
typedef void (* wifi_promiscuous_cb_t)(void *buf, wifi_promiscuous_pkt_type_t type);
/**
* @brief Register the RX callback function in the promiscuous mode.
*
* Each time a packet is received, the registered callback function will be called.
*
* @param cb callback
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_promiscuous_rx_cb(wifi_promiscuous_cb_t cb);
/**
* @brief Enable the promiscuous mode.
*
* @param en false - disable, true - enable
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_promiscuous(bool en);
/**
* @brief Get the promiscuous mode.
*
* @param[out] en store the current status of promiscuous mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_promiscuous(bool *en);
/**
* @brief Enable the promiscuous mode packet type filter.
*
* @note The default filter is to filter all packets except WIFI_PKT_MISC
*
* @param filter the packet type filtered in promiscuous mode.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_promiscuous_filter(const wifi_promiscuous_filter_t *filter);
/**
* @brief Get the promiscuous filter.
*
* @param[out] filter store the current status of promiscuous filter
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_promiscuous_filter(wifi_promiscuous_filter_t *filter);
/**
* @brief Enable subtype filter of the control packet in promiscuous mode.
*
* @note The default filter is to filter none control packet.
*
* @param filter the subtype of the control packet filtered in promiscuous mode.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_promiscuous_ctrl_filter(const wifi_promiscuous_filter_t *filter);
/**
* @brief Get the subtype filter of the control packet in promiscuous mode.
*
* @param[out] filter store the current status of subtype filter of the control packet in promiscuous mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_promiscuous_ctrl_filter(wifi_promiscuous_filter_t *filter);
/**
* @brief Set the configuration of the STA, AP or NAN
*
* @attention 1. This API can be called only when specified interface is enabled, otherwise, API fail
* @attention 2. For station configuration, bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.
* @attention 3. ESP devices are limited to only one channel, so when in the soft-AP+station mode, the soft-AP will adjust its channel automatically to be the same as
* the channel of the station.
* @attention 4. The configuration will be stored in NVS for station and soft-AP
*
* @param interface interface
* @param conf station, soft-AP or NAN configuration
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_IF: invalid interface
* - ESP_ERR_WIFI_MODE: invalid mode
* - ESP_ERR_WIFI_PASSWORD: invalid password
* - ESP_ERR_WIFI_NVS: WiFi internal NVS error
* - others: refer to the error code in esp_err.h
*/
esp_err_t esp_wifi_set_config(wifi_interface_t interface, wifi_config_t *conf);
/**
* @brief Get configuration of specified interface
*
* @param interface interface
* @param[out] conf station or soft-AP configuration
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_IF: invalid interface
*/
esp_err_t esp_wifi_get_config(wifi_interface_t interface, wifi_config_t *conf);
/**
* @brief Get STAs associated with soft-AP
*
* @attention SSC only API
*
* @param[out] sta station list
* ap can get the connected sta's phy mode info through the struct member
* phy_11bphy_11gphy_11nphy_lr in the wifi_sta_info_t struct.
* For example, phy_11b = 1 imply that sta support 802.11b mode
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
* - ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid
*/
esp_err_t esp_wifi_ap_get_sta_list(wifi_sta_list_t *sta);
/**
* @brief Get AID of STA connected with soft-AP
*
* @param mac STA's mac address
* @param[out] aid Store the AID corresponding to STA mac
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_NOT_FOUND: Requested resource not found
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
* - ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid
*/
esp_err_t esp_wifi_ap_get_sta_aid(const uint8_t mac[6], uint16_t *aid);
/**
* @brief Set the WiFi API configuration storage type
*
* @attention 1. The default value is WIFI_STORAGE_FLASH
*
* @param storage : storage type
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_storage(wifi_storage_t storage);
/**
* @brief Function signature for received Vendor-Specific Information Element callback.
* @param ctx Context argument, as passed to esp_wifi_set_vendor_ie_cb() when registering callback.
* @param type Information element type, based on frame type received.
* @param sa Source 802.11 address.
* @param vnd_ie Pointer to the vendor specific element data received.
* @param rssi Received signal strength indication.
*/
typedef void (*esp_vendor_ie_cb_t) (void *ctx, wifi_vendor_ie_type_t type, const uint8_t sa[6], const vendor_ie_data_t *vnd_ie, int rssi);
/**
* @brief Set 802.11 Vendor-Specific Information Element
*
* @param enable If true, specified IE is enabled. If false, specified IE is removed.
* @param type Information Element type. Determines the frame type to associate with the IE.
* @param idx Index to set or clear. Each IE type can be associated with up to two elements (indices 0 & 1).
* @param vnd_ie Pointer to vendor specific element data. First 6 bytes should be a header with fields matching vendor_ie_data_t.
* If enable is false, this argument is ignored and can be NULL. Data does not need to remain valid after the function returns.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init()
* - ESP_ERR_INVALID_ARG: Invalid argument, including if first byte of vnd_ie is not WIFI_VENDOR_IE_ELEMENT_ID (0xDD)
* or second byte is an invalid length.
* - ESP_ERR_NO_MEM: Out of memory
*/
esp_err_t esp_wifi_set_vendor_ie(bool enable, wifi_vendor_ie_type_t type, wifi_vendor_ie_id_t idx, const void *vnd_ie);
/**
* @brief Register Vendor-Specific Information Element monitoring callback.
*
* @param cb Callback function
* @param ctx Context argument, passed to callback function.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_vendor_ie_cb(esp_vendor_ie_cb_t cb, void *ctx);
/**
* @brief Set maximum transmitting power after WiFi start.
*
* @attention 1. Maximum power before wifi startup is limited by PHY init data bin.
* @attention 2. The value set by this API will be mapped to the max_tx_power of the structure wifi_country_t variable.
* @attention 3. Mapping Table {Power, max_tx_power} = {{8, 2}, {20, 5}, {28, 7}, {34, 8}, {44, 11},
* {52, 13}, {56, 14}, {60, 15}, {66, 16}, {72, 18}, {80, 20}}.
* @attention 4. Param power unit is 0.25dBm, range is [8, 84] corresponding to 2dBm - 20dBm.
* @attention 5. Relationship between set value and actual value. As follows: {set value range, actual value} = {{[8, 19],8}, {[20, 27],20}, {[28, 33],28}, {[34, 43],34}, {[44, 51],44}, {[52, 55],52}, {[56, 59],56}, {[60, 65],60}, {[66, 71],66}, {[72, 79],72}, {[80, 84],80}}.
*
* @param power Maximum WiFi transmitting power.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is out of range
*/
esp_err_t esp_wifi_set_max_tx_power(int8_t power);
/**
* @brief Get maximum transmiting power after WiFi start
*
* @param power Maximum WiFi transmitting power, unit is 0.25dBm.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_max_tx_power(int8_t *power);
/**
* @brief Set mask to enable or disable some WiFi events
*
* @attention 1. Mask can be created by logical OR of various WIFI_EVENT_MASK_ constants.
* Events which have corresponding bit set in the mask will not be delivered to the system event handler.
* @attention 2. Default WiFi event mask is WIFI_EVENT_MASK_AP_PROBEREQRECVED.
* @attention 3. There may be lots of stations sending probe request data around.
* Don't unmask this event unless you need to receive probe request data.
*
* @param mask WiFi event mask.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_event_mask(uint32_t mask);
/**
* @brief Get mask of WiFi events
*
* @param mask WiFi event mask.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_event_mask(uint32_t *mask);
/**
* @brief Send raw ieee80211 data
*
* @attention Currently only support for sending beacon/probe request/probe response/action and non-QoS
* data frame
*
* @param ifx interface if the Wi-Fi mode is Station, the ifx should be WIFI_IF_STA. If the Wi-Fi
* mode is SoftAP, the ifx should be WIFI_IF_AP. If the Wi-Fi mode is Station+SoftAP, the
* ifx should be WIFI_IF_STA or WIFI_IF_AP. If the ifx is wrong, the API returns ESP_ERR_WIFI_IF.
* @param buffer raw ieee80211 buffer
* @param len the length of raw buffer, the len must be <= 1500 Bytes and >= 24 Bytes
* @param en_sys_seq indicate whether use the internal sequence number. If en_sys_seq is false, the
* sequence in raw buffer is unchanged, otherwise it will be overwritten by WiFi driver with
* the system sequence number.
* Generally, if esp_wifi_80211_tx is called before the Wi-Fi connection has been set up, both
* en_sys_seq==true and en_sys_seq==false are fine. However, if the API is called after the Wi-Fi
* connection has been set up, en_sys_seq must be true, otherwise ESP_ERR_INVALID_ARG is returned.
*
* @return
* - ESP_OK: success
* - ESP_ERR_WIFI_IF: Invalid interface
* - ESP_ERR_INVALID_ARG: Invalid parameter
* - ESP_ERR_WIFI_NO_MEM: out of memory
*/
esp_err_t esp_wifi_80211_tx(wifi_interface_t ifx, const void *buffer, int len, bool en_sys_seq);
/**
* @brief The RX callback function of Channel State Information(CSI) data.
*
* Each time a CSI data is received, the callback function will be called.
*
* @param ctx context argument, passed to esp_wifi_set_csi_rx_cb() when registering callback function.
* @param data CSI data received. The memory that it points to will be deallocated after callback function returns.
*
*/
typedef void (* wifi_csi_cb_t)(void *ctx, wifi_csi_info_t *data);
/**
* @brief Register the RX callback function of CSI data.
*
* Each time a CSI data is received, the callback function will be called.
*
* @param cb callback
* @param ctx context argument, passed to callback function
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
*/
esp_err_t esp_wifi_set_csi_rx_cb(wifi_csi_cb_t cb, void *ctx);
/**
* @brief Set CSI data configuration
*
* @param config configuration
*
* return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_csi_config(const wifi_csi_config_t *config);
/**
* @brief Enable or disable CSI
*
* @param en true - enable, false - disable
*
* return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_csi(bool en);
/**
* @brief Set antenna GPIO configuration
*
* @param config Antenna GPIO configuration.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid GPIO number etc
*/
esp_err_t esp_wifi_set_ant_gpio(const wifi_ant_gpio_config_t *config);
/**
* @brief Get current antenna GPIO configuration
*
* @param config Antenna GPIO configuration.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL
*/
esp_err_t esp_wifi_get_ant_gpio(wifi_ant_gpio_config_t *config);
/**
* @brief Set antenna configuration
*
* @param config Antenna configuration.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid antenna mode or invalid GPIO number
*/
esp_err_t esp_wifi_set_ant(const wifi_ant_config_t *config);
/**
* @brief Get current antenna configuration
*
* @param config Antenna configuration.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL
*/
esp_err_t esp_wifi_get_ant(wifi_ant_config_t *config);
/**
* @brief Get the TSF time
* In Station mode or SoftAP+Station mode if station is not connected or station doesn't receive at least
* one beacon after connected, will return 0
*
* @attention Enabling power save may cause the return value inaccurate, except WiFi modem sleep
*
* @param interface The interface whose tsf_time is to be retrieved.
*
* @return 0 or the TSF time
*/
int64_t esp_wifi_get_tsf_time(wifi_interface_t interface);
/**
* @brief Set the inactive time of the STA or AP
*
* @attention 1. For Station, If the station does not receive a beacon frame from the connected SoftAP during the inactive time,
* disconnect from SoftAP. Default 6s.
* @attention 2. For SoftAP, If the softAP doesn't receive any data from the connected STA during inactive time,
* the softAP will force deauth the STA. Default is 300s.
* @attention 3. The inactive time configuration is not stored into flash
*
* @param ifx interface to be configured.
* @param sec Inactive time. Unit seconds.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument, For Station, if sec is less than 3. For SoftAP, if sec is less than 10.
*/
esp_err_t esp_wifi_set_inactive_time(wifi_interface_t ifx, uint16_t sec);
/**
* @brief Get inactive time of specified interface
*
* @param ifx Interface to be configured.
* @param sec Inactive time. Unit seconds.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_inactive_time(wifi_interface_t ifx, uint16_t *sec);
/**
* @brief Dump WiFi statistics
*
* @param modules statistic modules to be dumped
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_statis_dump(uint32_t modules);
/**
* @brief Set RSSI threshold, if average rssi gets lower than threshold, WiFi task will post event WIFI_EVENT_STA_BSS_RSSI_LOW.
*
* @attention If the user wants to receive another WIFI_EVENT_STA_BSS_RSSI_LOW event after receiving one, this API needs to be
* called again with an updated/same RSSI threshold.
*
* @param rssi threshold value in dbm between -100 to 10
* Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_rssi_threshold(int32_t rssi);
/**
* @brief Start an FTM Initiator session by sending FTM request
* If successful, event WIFI_EVENT_FTM_REPORT is generated with the result of the FTM procedure
*
* @attention 1. Use this API only in Station mode.
* @attention 2. If FTM is initiated on a different channel than Station is connected in or internal SoftAP is started in,
* FTM defaults to a single burst in ASAP mode.
*
* @param cfg FTM Initiator session configuration
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_ftm_initiate_session(wifi_ftm_initiator_cfg_t *cfg);
/**
* @brief End the ongoing FTM Initiator session
*
* @attention This API works only on FTM Initiator
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_ftm_end_session(void);
/**
* @brief Set offset in cm for FTM Responder. An equivalent offset is calculated in picoseconds
* and added in TOD of FTM Measurement frame (T1).
*
* @attention Use this API only in AP mode before performing FTM as responder
*
* @param offset_cm T1 Offset to be added in centimeters
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_ftm_resp_set_offset(int16_t offset_cm);
/**
* @brief Enable or disable 11b rate of specified interface
*
* @attention 1. This API should be called after esp_wifi_init() and before esp_wifi_start().
* @attention 2. Only when really need to disable 11b rate call this API otherwise don't call this.
*
* @param ifx Interface to be configured.
* @param disable true means disable 11b rate while false means enable 11b rate.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_config_11b_rate(wifi_interface_t ifx, bool disable);
#define ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE 0
/**
* @brief Set wake interval for connectionless modules to wake up periodically.
*
* @attention 1. Only one wake interval for all connectionless modules.
* @attention 2. This configuration could work at connected status.
* When ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is enabled, this configuration could work at disconnected status.
* @attention 3. Event WIFI_EVENT_CONNECTIONLESS_MODULE_WAKE_INTERVAL_START would be posted each time wake interval starts.
* @attention 4. Recommend to configure interval in multiples of hundred. (e.g. 100ms)
* @attention 5. Recommend to configure interval to ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE to get stable performance at coexistence mode.
*
* @param wake_interval Milliseconds after would the chip wake up, from 1 to 65535.
*/
esp_err_t esp_wifi_connectionless_module_set_wake_interval(uint16_t wake_interval);
/**
* @brief Request extra reference of Wi-Fi radio.
* Wi-Fi keep active state(RF opened) to be able to receive packets.
*
* @attention Please pair the use of `esp_wifi_force_wakeup_acquire` with `esp_wifi_force_wakeup_release`.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
*/
esp_err_t esp_wifi_force_wakeup_acquire(void);
/**
* @brief Release extra reference of Wi-Fi radio.
* Wi-Fi go to sleep state(RF closed) if no more use of radio.
*
* @attention Please pair the use of `esp_wifi_force_wakeup_acquire` with `esp_wifi_force_wakeup_release`.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
*/
esp_err_t esp_wifi_force_wakeup_release(void);
/**
* @brief configure country
*
* @attention 1. When ieee80211d_enabled, the country info of the AP to which
* the station is connected is used. E.g. if the configured country is US
* and the country info of the AP to which the station is connected is JP
* then the country info that will be used is JP. If the station disconnected
* from the AP the country info is set back to the country info of the station automatically,
* US in the example.
* @attention 2. When ieee80211d_enabled is disabled, then the configured country info is used always.
* @attention 3. When the country info is changed because of configuration or because the station connects to a different
* external AP, the country IE in probe response/beacon of the soft-AP is also changed.
* @attention 4. The country configuration is stored into flash.
* @attention 5. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the
* country info.
* @attention 6. Supported country codes are "01"(world safe mode) "AT","AU","BE","BG","BR",
* "CA","CH","CN","CY","CZ","DE","DK","EE","ES","FI","FR","GB","GR","HK","HR","HU",
* "IE","IN","IS","IT","JP","KR","LI","LT","LU","LV","MT","MX","NL","NO","NZ","PL","PT",
* "RO","SE","SI","SK","TW","US"
*
* @attention 7. When country code "01" (world safe mode) is set, SoftAP mode won't contain country IE.
* @attention 8. The default country is "01" (world safe mode) and ieee80211d_enabled is TRUE.
* @attention 9. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '.
*
* @param country the configured country ISO code
* @param ieee80211d_enabled 802.11d is enabled or not
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_set_country_code(const char *country, bool ieee80211d_enabled);
/**
* @brief get the current country code
*
* @param country country code
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_INVALID_ARG: invalid argument
*/
esp_err_t esp_wifi_get_country_code(char *country);
/**
* @brief Config 80211 tx rate of specified interface
*
* @attention 1. This API should be called after esp_wifi_init() and before esp_wifi_start().
*
* @param ifx Interface to be configured.
* @param rate Phy rate to be configured.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_config_80211_tx_rate(wifi_interface_t ifx, wifi_phy_rate_t rate);
/**
* @brief Disable PMF configuration for specified interface
*
* @attention This API should be called after esp_wifi_set_config() and before esp_wifi_start().
*
* @param ifx Interface to be configured.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_disable_pmf_config(wifi_interface_t ifx);
/**
* @brief Get the Association id assigned to STA by AP
*
* @param[out] aid store the aid
*
* @attention aid = 0 if station is not connected to AP.
*
* @return
* - ESP_OK: succeed
*/
esp_err_t esp_wifi_sta_get_aid(uint16_t *aid);
/**
* @brief Get the negotiated phymode after connection.
*
* @param[out] phymode store the negotiated phymode.
*
* @return
* - ESP_OK: succeed
*/
esp_err_t esp_wifi_sta_get_negotiated_phymode(wifi_phy_mode_t *phymode);
/**
* @brief Config dynamic carrier sense
*
* @attention This API should be called after esp_wifi_start().
*
* @param enabled Dynamic carrier sense is enabled or not.
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_set_dynamic_cs(bool enabled);
/**
* @brief Get the rssi info after station connected to AP
*
* @attention This API should be called after station connected to AP.
*
* @param rssi store the rssi info received from last beacon.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_FAIL: failed
*/
esp_err_t esp_wifi_sta_get_rssi(int *rssi);
#ifdef __cplusplus
}
#endif
#endif /* __ESP_WIFI_H__ */