mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
331 lines
9.3 KiB
C
331 lines
9.3 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <stdlib.h>
|
|
#include <assert.h>
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include <sys/param.h> // For MIN/MAX(a, b)
|
|
|
|
#include <freertos/FreeRTOS.h>
|
|
#include <freertos/task.h>
|
|
#include <freertos/semphr.h>
|
|
#include <soc/soc.h>
|
|
#include <soc/soc_memory_layout.h>
|
|
#include "soc/io_mux_reg.h"
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_cpu.h"
|
|
#include "spi_flash_mmap.h"
|
|
#include "esp_log.h"
|
|
#include "esp_private/system_internal.h"
|
|
#include "esp_private/spi_flash_os.h"
|
|
#include "esp_private/esp_clk.h"
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#include "esp32/rom/cache.h"
|
|
#include "esp32/rom/spi_flash.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#include "esp32s2/rom/cache.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32S3
|
|
#include "soc/spi_mem_reg.h"
|
|
#include "esp32s3/rom/opi_flash.h"
|
|
#include "esp32s3/rom/cache.h"
|
|
#include "esp32s3/opi_flash_private.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32C3
|
|
#include "esp32c3/rom/cache.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32H2
|
|
#include "esp32h2/rom/cache.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32C2
|
|
#include "esp32c2/rom/cache.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32C6
|
|
#include "esp32c6/rom/cache.h"
|
|
#endif
|
|
#include "esp_rom_spiflash.h"
|
|
#include "esp_flash_partitions.h"
|
|
#include "esp_private/cache_utils.h"
|
|
#include "esp_flash.h"
|
|
#include "esp_attr.h"
|
|
#include "bootloader_flash.h"
|
|
#include "bootloader_flash_config.h"
|
|
#include "esp_compiler.h"
|
|
#include "esp_rom_efuse.h"
|
|
#if CONFIG_SPIRAM
|
|
#include "esp_private/esp_psram_io.h"
|
|
#endif
|
|
|
|
/* bytes erased by SPIEraseBlock() ROM function */
|
|
#define BLOCK_ERASE_SIZE 65536
|
|
|
|
/* Limit number of bytes written/read in a single SPI operation,
|
|
as these operations disable all higher priority tasks from running.
|
|
*/
|
|
#ifdef CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
#define MAX_WRITE_CHUNK CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
#else
|
|
#define MAX_WRITE_CHUNK 8192
|
|
#endif // CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
|
|
#define MAX_READ_CHUNK 16384
|
|
|
|
static const char *TAG __attribute__((unused)) = "spi_flash";
|
|
|
|
#if CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
static spi_flash_counters_t s_flash_stats;
|
|
|
|
#define COUNTER_START() uint32_t ts_begin = esp_cpu_get_cycle_count()
|
|
#define COUNTER_STOP(counter) \
|
|
do{ \
|
|
s_flash_stats.counter.count++; \
|
|
s_flash_stats.counter.time += (esp_cpu_get_cycle_count() - ts_begin) / (esp_clk_cpu_freq() / 1000000); \
|
|
} while(0)
|
|
|
|
#define COUNTER_ADD_BYTES(counter, size) \
|
|
do { \
|
|
s_flash_stats.counter.bytes += size; \
|
|
} while (0)
|
|
|
|
#else
|
|
#define COUNTER_START()
|
|
#define COUNTER_STOP(counter)
|
|
#define COUNTER_ADD_BYTES(counter, size)
|
|
|
|
#endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_default_ops = {
|
|
.start = spi_flash_disable_interrupts_caches_and_other_cpu,
|
|
.end = spi_flash_enable_interrupts_caches_and_other_cpu,
|
|
};
|
|
|
|
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_no_os_ops = {
|
|
.start = spi_flash_disable_interrupts_caches_and_other_cpu_no_os,
|
|
.end = spi_flash_enable_interrupts_caches_no_os,
|
|
};
|
|
|
|
static const spi_flash_guard_funcs_t *s_flash_guard_ops;
|
|
|
|
void IRAM_ATTR spi_flash_guard_set(const spi_flash_guard_funcs_t *funcs)
|
|
{
|
|
s_flash_guard_ops = funcs;
|
|
}
|
|
|
|
const spi_flash_guard_funcs_t *IRAM_ATTR spi_flash_guard_get(void)
|
|
{
|
|
return s_flash_guard_ops;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS
|
|
#define UNSAFE_WRITE_ADDRESS abort()
|
|
#else
|
|
#define UNSAFE_WRITE_ADDRESS return false
|
|
#endif
|
|
|
|
|
|
static __attribute__((unused)) bool is_safe_write_address(size_t addr, size_t size)
|
|
{
|
|
if (!esp_partition_main_flash_region_safe(addr, size)) {
|
|
UNSAFE_WRITE_ADDRESS;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#if CONFIG_SPI_FLASH_ROM_IMPL
|
|
#include "esp_heap_caps.h"
|
|
|
|
void IRAM_ATTR *spi_flash_malloc_internal(size_t size)
|
|
{
|
|
return heap_caps_malloc(size, MALLOC_CAP_8BIT|MALLOC_CAP_INTERNAL);
|
|
}
|
|
|
|
void IRAM_ATTR spi_flash_rom_impl_init(void)
|
|
{
|
|
spi_flash_guard_set(&g_flash_guard_default_ops);
|
|
|
|
/* These two functions are in ROM only */
|
|
extern void spi_flash_mmap_os_func_set(void *(*func1)(size_t size), void (*func2)(void *p));
|
|
spi_flash_mmap_os_func_set(spi_flash_malloc_internal, heap_caps_free);
|
|
|
|
extern esp_err_t spi_flash_mmap_page_num_init(uint32_t page_num);
|
|
spi_flash_mmap_page_num_init(128);
|
|
}
|
|
#endif
|
|
|
|
void IRAM_ATTR esp_mspi_pin_init(void)
|
|
{
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
bool octal_mspi_required = bootloader_flash_is_octal_mode_enabled();
|
|
#if CONFIG_SPIRAM_MODE_OCT
|
|
octal_mspi_required |= true;
|
|
#endif
|
|
|
|
if (octal_mspi_required) {
|
|
esp_rom_opiflash_pin_config();
|
|
extern void spi_timing_set_pin_drive_strength(void);
|
|
spi_timing_set_pin_drive_strength();
|
|
}
|
|
//Set F4R4 board pin drive strength. TODO: IDF-3663
|
|
#endif
|
|
}
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_init_chip_state(void)
|
|
{
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
if (bootloader_flash_is_octal_mode_enabled()) {
|
|
return esp_opiflash_init(rom_spiflash_legacy_data->chip.device_id);
|
|
} else
|
|
#endif
|
|
{
|
|
#if CONFIG_IDF_TARGET_ESP32S3
|
|
// Currently, only esp32s3 allows high performance mode.
|
|
return spi_flash_enable_high_performance_mode();
|
|
#else
|
|
return ESP_OK;
|
|
#endif // CONFIG_IDF_TARGET_ESP32S3
|
|
}
|
|
}
|
|
|
|
#if CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
static inline void dump_counter(spi_flash_counter_t *counter, const char *name)
|
|
{
|
|
ESP_LOGI(TAG, "%s count=%8d time=%8dus bytes=%8d\n", name,
|
|
counter->count, counter->time, counter->bytes);
|
|
}
|
|
|
|
const spi_flash_counters_t *spi_flash_get_counters(void)
|
|
{
|
|
return &s_flash_stats;
|
|
}
|
|
|
|
void spi_flash_reset_counters(void)
|
|
{
|
|
memset(&s_flash_stats, 0, sizeof(s_flash_stats));
|
|
}
|
|
|
|
void spi_flash_dump_counters(void)
|
|
{
|
|
dump_counter(&s_flash_stats.read, "read ");
|
|
dump_counter(&s_flash_stats.write, "write");
|
|
dump_counter(&s_flash_stats.erase, "erase");
|
|
}
|
|
|
|
#endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
void IRAM_ATTR spi_flash_set_rom_required_regs(void)
|
|
{
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
if (bootloader_flash_is_octal_mode_enabled()) {
|
|
//Disable the variable dummy mode when doing timing tuning
|
|
CLEAR_PERI_REG_MASK(SPI_MEM_DDR_REG(1), SPI_MEM_SPI_FMEM_VAR_DUMMY);
|
|
/**
|
|
* STR /DTR mode setting is done every time when `esp_rom_opiflash_exec_cmd` is called
|
|
*
|
|
* Add any registers that are not set in ROM SPI flash functions here in the future
|
|
*/
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if CONFIG_SPIRAM_MODE_OCT
|
|
// This function will only be called when Octal PSRAM enabled.
|
|
void IRAM_ATTR spi_flash_set_vendor_required_regs(void)
|
|
{
|
|
if (bootloader_flash_is_octal_mode_enabled()) {
|
|
esp_opiflash_set_required_regs();
|
|
SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 1, SPI_MEM_CACHE_USR_CMD_4BYTE_S);
|
|
} else {
|
|
//Flash chip requires MSPI specifically, call this function to set them
|
|
// Set back MSPI registers after Octal PSRAM initialization.
|
|
SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 0, SPI_MEM_CACHE_USR_CMD_4BYTE_S);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static const uint8_t s_mspi_io_num_default[] = {
|
|
SPI_CLK_GPIO_NUM,
|
|
SPI_Q_GPIO_NUM,
|
|
SPI_D_GPIO_NUM,
|
|
SPI_CS0_GPIO_NUM,
|
|
SPI_HD_GPIO_NUM,
|
|
SPI_WP_GPIO_NUM,
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
SPI_DQS_GPIO_NUM,
|
|
SPI_D4_GPIO_NUM,
|
|
SPI_D5_GPIO_NUM,
|
|
SPI_D6_GPIO_NUM,
|
|
SPI_D7_GPIO_NUM
|
|
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
};
|
|
|
|
uint8_t esp_mspi_get_io(esp_mspi_io_t io)
|
|
{
|
|
#if CONFIG_SPIRAM
|
|
if (io == ESP_MSPI_IO_CS1) {
|
|
return esp_psram_io_get_cs_io();
|
|
}
|
|
#endif
|
|
|
|
assert(io >= ESP_MSPI_IO_CLK);
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
assert(io <= ESP_MSPI_IO_D7);
|
|
#else
|
|
assert(io <= ESP_MSPI_IO_WP);
|
|
#endif
|
|
|
|
#if SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
|
|
uint8_t mspi_io = 0;
|
|
uint32_t spiconfig = 0;
|
|
|
|
if (io == ESP_MSPI_IO_WP) {
|
|
/**
|
|
* wp pad is a bit special:
|
|
* 1. since 32's efuse does not have enough bits for wp pad, so wp pad config put in flash bin header
|
|
* 2. rom code take 0x3f as invalid wp pad num, but take 0 as other invalid mspi pads num
|
|
*/
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
return bootloader_flash_get_wp_pin();
|
|
#else
|
|
spiconfig = esp_rom_efuse_get_flash_wp_gpio();
|
|
return (spiconfig == 0x3f) ? s_mspi_io_num_default[io] : spiconfig & 0x3f;
|
|
#endif
|
|
}
|
|
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
spiconfig = (io < ESP_MSPI_IO_WP) ? esp_rom_efuse_get_flash_gpio_info() : esp_rom_efuse_get_opiconfig();
|
|
#else
|
|
spiconfig = esp_rom_efuse_get_flash_gpio_info();
|
|
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
|
|
if (spiconfig == ESP_ROM_EFUSE_FLASH_DEFAULT_SPI) {
|
|
mspi_io = s_mspi_io_num_default[io];
|
|
} else if (io < ESP_MSPI_IO_WP) {
|
|
/**
|
|
* [0 : 5] -- CLK
|
|
* [6 :11] -- Q(D1)
|
|
* [12:17] -- D(D0)
|
|
* [18:23] -- CS
|
|
* [24:29] -- HD(D3)
|
|
*/
|
|
mspi_io = (spiconfig >> io * 6) & 0x3f;
|
|
}
|
|
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
else {
|
|
/**
|
|
* [0 : 5] -- DQS
|
|
* [6 :11] -- D4
|
|
* [12:17] -- D5
|
|
* [18:23] -- D6
|
|
* [24:29] -- D7
|
|
*/
|
|
mspi_io = (spiconfig >> (io - ESP_MSPI_IO_DQS) * 6) & 0x3f;
|
|
}
|
|
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
|
|
return mspi_io;
|
|
#else // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
|
|
return s_mspi_io_num_default[io];
|
|
#endif // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
|
|
}
|