esp-idf/components/esp_eth/include/esp_eth_phy_802_3.h
David Čermák 00d9861a08 Merge branch 'feature/mmd_access_v5.1' into 'release/v5.1'
esp_eth: Add functions to access PHY using MDIO (v5.1)

See merge request espressif/esp-idf!28840
2024-02-29 20:29:57 +08:00

379 lines
14 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "esp_eth.h"
#include "sdkconfig.h"
#include "eth_phy_802_3_regs.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief IEEE 802.3 PHY object infostructure
*
*/
typedef struct {
esp_eth_phy_t parent; /*!< Parent Ethernet PHY instance */
esp_eth_mediator_t *eth; /*!< Mediator of Ethernet driver */
int addr; /*!< PHY address */
uint32_t reset_timeout_ms; /*!< Reset timeout value (Unit: ms) */
uint32_t autonego_timeout_ms; /*!< Auto-negotiation timeout value (Unit: ms) */
eth_link_t link_status; /*!< Current Link status */
int reset_gpio_num; /*!< Reset GPIO number, -1 means no hardware reset */
} phy_802_3_t;
/**
* @brief IEEE 802.3 MMD modes enumeration
*
*/
typedef enum {
MMD_FUNC_ADDRESS = 0,
MMD_FUNC_DATA_NOINCR = 1,
MMD_FUNC_DATA_RWINCR = 2,
MMD_FUNC_DATA_WINCR = 3
} esp_eth_phy_802_3_mmd_func_t;
/**
* @brief Set Ethernet mediator
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param eth Ethernet mediator pointer
* @return
* - ESP_OK: Ethermet mediator set successfuly
* - ESP_ERR_INVALID_ARG: if @c eth is @c NULL
*/
esp_err_t esp_eth_phy_802_3_set_mediator(phy_802_3_t *phy_802_3, esp_eth_mediator_t *eth);
/**
* @brief Reset PHY
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: Ethernet PHY reset successfuly
* - ESP_FAIL: reset Ethernet PHY failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_reset(phy_802_3_t *phy_802_3);
/**
* @brief Control autonegotiation mode of Ethernet PHY
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param cmd autonegotiation command enumeration
* @param[out] autonego_en_stat autonegotiation enabled flag
* @return
* - ESP_OK: Ethernet PHY autonegotiation configured successfuly
* - ESP_FAIL: Ethernet PHY autonegotiation configuration fail because some error occured
* - ESP_ERR_INVALID_ARG: invalid value of @c cmd
*/
esp_err_t esp_eth_phy_802_3_autonego_ctrl(phy_802_3_t *phy_802_3, eth_phy_autoneg_cmd_t cmd, bool *autonego_en_stat);
/**
* @brief Power control of Ethernet PHY
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param enable set true to power ON Ethernet PHY; set false to power OFF Ethernet PHY
* @return
* - ESP_OK: Ethernet PHY power down mode set successfuly
* - ESP_FAIL: Ethernet PHY power up or power down failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_pwrctl(phy_802_3_t *phy_802_3, bool enable);
/**
* @brief Set Ethernet PHY address
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param addr new PHY address
* @return
* - ESP_OK: Ethernet PHY address set
*/
esp_err_t esp_eth_phy_802_3_set_addr(phy_802_3_t *phy_802_3, uint32_t addr);
/**
* @brief Get Ethernet PHY address
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param[out] addr Ethernet PHY address
* @return
* - ESP_OK: Ethernet PHY address read successfuly
* - ESP_ERR_INVALID_ARG: @c addr pointer is @c NULL
*/
esp_err_t esp_eth_phy_802_3_get_addr(phy_802_3_t *phy_802_3, uint32_t *addr);
/**
* @brief Advertise pause function ability
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param ability enable or disable pause ability
* @return
* - ESP_OK: pause ability set successfuly
* - ESP_FAIL: Advertise pause function ability failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_advertise_pause_ability(phy_802_3_t *phy_802_3, uint32_t ability);
/**
* @brief Set Ethernet PHY loopback mode
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param enable set true to enable loopback; set false to disable loopback
* @return
* - ESP_OK: Ethernet PHY loopback mode set successfuly
* - ESP_FAIL: Ethernet PHY loopback configuration failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_loopback(phy_802_3_t *phy_802_3, bool enable);
/**
* @brief Set Ethernet PHY speed
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param speed new speed of Ethernet PHY link
* @return
* - ESP_OK: Ethernet PHY speed set successfuly
* - ESP_FAIL: Set Ethernet PHY speed failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_set_speed(phy_802_3_t *phy_802_3, eth_speed_t speed);
/**
* @brief Set Ethernet PHY duplex mode
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param duplex new duplex mode for Ethernet PHY link
* @return
* - ESP_OK: Ethernet PHY duplex mode set successfuly
* - ESP_ERR_INVALID_STATE: unable to set duplex mode to Half if loopback is enabled
* - ESP_FAIL: Set Ethernet PHY duplex mode failed because some error occured
*/
esp_err_t esp_eth_phy_802_3_set_duplex(phy_802_3_t *phy_802_3, eth_duplex_t duplex);
/**
* @brief Set Ethernet PHY link status
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param link new link status
* @return
* - ESP_OK: Ethernet PHY link set successfuly
*/
esp_err_t esp_eth_phy_802_3_set_link(phy_802_3_t *phy_802_3, eth_link_t link);
/**
* @brief Initialize Ethernet PHY
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: Ethernet PHY initialized successfuly
*/
esp_err_t esp_eth_phy_802_3_init(phy_802_3_t *phy_802_3);
/**
* @brief Power off Eternet PHY
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: Ethernet PHY powered off successfuly
*/
esp_err_t esp_eth_phy_802_3_deinit(phy_802_3_t *phy_802_3);
/**
* @brief Delete Ethernet PHY infostructure
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: Ethrnet PHY infostructure deleted
*/
esp_err_t esp_eth_phy_802_3_del(phy_802_3_t *phy_802_3);
/**
* @brief Performs hardware reset with specific reset pin assertion time
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param reset_assert_us Hardware reset pin assertion time
* @return
* - ESP_OK: reset Ethernet PHY successfully
*/
esp_err_t esp_eth_phy_802_3_reset_hw(phy_802_3_t *phy_802_3, uint32_t reset_assert_us);
/**
* @brief Detect PHY address
*
* @param eth Mediator of Ethernet driver
* @param[out] detected_addr: a valid address after detection
* @return
* - ESP_OK: detect phy address successfully
* - ESP_ERR_INVALID_ARG: invalid parameter
* - ESP_ERR_NOT_FOUND: can't detect any PHY device
* - ESP_FAIL: detect phy address failed because some error occurred
*/
esp_err_t esp_eth_phy_802_3_detect_phy_addr(esp_eth_mediator_t *eth, int *detected_addr);
/**
* @brief Performs basic PHY chip initialization
*
* @note It should be called as the first function in PHY specific driver instance
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: initialized Ethernet PHY successfully
* - ESP_FAIL: initialization of Ethernet PHY failed because some error occurred
* - ESP_ERR_INVALID_ARG: invalid argument
* - ESP_ERR_NOT_FOUND: PHY device not detected
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
*/
esp_err_t esp_eth_phy_802_3_basic_phy_init(phy_802_3_t *phy_802_3);
/**
* @brief Performs basic PHY chip de-initialization
*
* @note It should be called as the last function in PHY specific driver instance
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @return
* - ESP_OK: de-initialized Ethernet PHY successfully
* - ESP_FAIL: de-initialization of Ethernet PHY failed because some error occurred
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
*/
esp_err_t esp_eth_phy_802_3_basic_phy_deinit(phy_802_3_t *phy_802_3);
/**
* @brief Reads raw content of OUI field
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param[out] oui OUI value
* @return
* - ESP_OK: OUI field read successfully
* - ESP_FAIL: OUI field read failed because some error occurred
* - ESP_ERR_INVALID_ARG: invalid @c oui argument
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
*/
esp_err_t esp_eth_phy_802_3_read_oui(phy_802_3_t *phy_802_3, uint32_t *oui);
/**
* @brief Reads manufacturers model and revision number
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param[out] model Manufacturers model number (can be NULL when not required)
* @param[out] rev Manufacturers revision number (can be NULL when not required)
* @return
* - ESP_OK: Manufacturers info read successfully
* - ESP_FAIL: Manufacturers info read failed because some error occurred
* - ESP_ERR_TIMEOUT: MII Management read/write operation timeout
* - ESP_ERR_INVALID_STATE: PHY is in invalid state to perform requested operation
*/
esp_err_t esp_eth_phy_802_3_read_manufac_info(phy_802_3_t *phy_802_3, uint8_t *model, uint8_t *rev);
/**
* @brief Reads MDIO device's internal address register
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param[out] mmd_addr Current address stored in device's register
* @return
* - ESP_OK: Address register read successfuly
* - ESP_FAIL: Address register read failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
*/
esp_err_t esp_eth_phy_802_3_get_mmd_addr(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t *mmd_addr);
/**
* @brief Write to DIO device's internal address register
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param[out] mmd_addr New value of MDIO device's address register value
* @return
* - ESP_OK: Address register written to successfuly
* - ESP_FAIL: Address register write failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
*/
esp_err_t esp_eth_phy_802_3_set_mmd_addr(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr);
/**
* @brief Read data of MDIO device's memory at address register
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param function MMD function
* @param[out] data Data read from the device's memory
* @return
* - ESP_OK: Memory read successfuly
* - ESP_FAIL: Memory read failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits) or MMD access function is invalid
*/
esp_err_t esp_eth_phy_802_3_read_mmd_data(phy_802_3_t *phy_802_3, uint8_t devaddr, esp_eth_phy_802_3_mmd_func_t function, uint32_t *data);
/**
* @brief Write data to MDIO device's memory at address register
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param function MMD function
* @param[out] data Data to write to the device's memory
* @return
* - ESP_OK: Memory written successfuly
* - ESP_FAIL: Memory write failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits) or MMD access function is invalid
*/
esp_err_t esp_eth_phy_802_3_write_mmd_data(phy_802_3_t *phy_802_3, uint8_t devaddr, esp_eth_phy_802_3_mmd_func_t function, uint32_t data);
/**
* @brief Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and read contents to *data
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param mmd_addr Address of MDIO device register
* @param[out] data Data read from the device's memory
* @return
* - ESP_OK: Memory read successfuly
* - ESP_FAIL: Memory read failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
*/
esp_err_t esp_eth_phy_802_3_read_mmd_register(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr, uint32_t *data);
/**
* @brief Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and write data
*
* @param phy_802_3 IEEE 802.3 PHY object infostructure
* @param devaddr Address of MDIO device
* @param mmd_addr Address of MDIO device register
* @param[out] data Data to write to the device's memory
* @return
* - ESP_OK: Memory written to successfuly
* - ESP_FAIL: Memory write failed because of some error occured
* - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
*/
esp_err_t esp_eth_phy_802_3_write_mmd_register(phy_802_3_t *phy_802_3, uint8_t devaddr, uint16_t mmd_addr, uint32_t data);
/**
* @brief Returns address to parent IEEE 802.3 PHY object infostructure
*
* @param phy Ethernet PHY instance
* @return phy_802_3_t*
* - address to parent IEEE 802.3 PHY object infostructure
*/
inline __attribute__((always_inline)) phy_802_3_t *esp_eth_phy_into_phy_802_3(esp_eth_phy_t *phy)
{
return __containerof(phy, phy_802_3_t, parent);
}
/**
* @brief Initializes configuration of parent IEEE 802.3 PHY object infostructure
*
* @param phy_802_3 Address to IEEE 802.3 PHY object infostructure
* @param config Configuration of the IEEE 802.3 PHY object
* @return
* - ESP_OK: configuration initialized successfully
* - ESP_ERR_INVALID_ARG: invalid @c config argument
*/
esp_err_t esp_eth_phy_802_3_obj_config_init(phy_802_3_t *phy_802_3, const eth_phy_config_t *config);
#ifdef __cplusplus
}
#endif