esp-idf/examples/peripherals/lcd/lvgl
2021-10-02 14:23:31 +08:00
..
main lcd: unify callback prototype 2021-10-02 14:23:31 +08:00
CMakeLists.txt lcd: unify callback prototype 2021-10-02 14:23:31 +08:00
README.md lcd: lvgl porting example 2021-09-13 15:08:48 +08:00
sdkconfig.defaults lcd: lvgl porting example 2021-09-13 15:08:48 +08:00

Supported Targets ESP32 ESP32-S2 ESP32-S3

LVGL porting example

LVGL is an open-source graphics library for creating modern GUIs. It has plenty of built-in graphical elements with low memory footprint, which is friendly for embedded GUI applications.

This example can be taken as a skeleton of porting the LVGL library onto the esp_lcd driver layer. Note that, this example only focuses on the display interface, regardless of the input device driver.

The whole porting code is located in this main file, and the UI demo code is located in another single file.

The UI will display two images (one Espressif logo and another Espressif text), which have been converted into C arrays by the online converting tool, and will be compiled directly into application binary.

This example is constructed by IDF component manager, all the external dependency will be handled by the CMake build system automatically. In this case, it will help download the lvgl from registry, with the version specified in the manifest file.

This example uses the esp_timer to generate the ticks needed by LVGL. For more porting guides, please refer to LVGL porting doc.

How to use the example

Hardware Required

  • An ESP development board
  • An Intel 8080 interfaced (so called MCU interface or parallel interface) LCD
  • An USB cable for power supply and programming

Hardware Connection

The connection between ESP Board and the LCD is as follows:

   ESP Board                      LCD Screen
┌─────────────┐              ┌────────────────┐
│             │              │                │
│         3V3 ├─────────────►│ VCC            │
│             │              │                │
│         GND ├──────────────┤ GND            │
│             │              │                │
│  DATA[0..7] │◄────────────►│ DATA[0..7]     │
│             │              │                │
│        PCLK ├─────────────►│ PCLK           │
│             │              │                │
│          CS ├─────────────►│ CS             │
│             │              │                │
│         D/C ├─────────────►│ D/C            │
│             │              │                │
│         RST ├─────────────►│ RST            │
│             │              │                │
│    BK_LIGHT ├─────────────►│ BCKL           │
│             │              │                │
└─────────────┘              └────────────────┘

The GPIO number used by this example can be changed in lvgl_example_main.c. Especially, please pay attention to the level used to turn on the LCD backlight, some LCD module needs a low level to turn it on, while others take a high level. You can change the backlight level macro EXAMPLE_LCD_BK_LIGHT_ON_LEVEL in lvgl_example_main.c.

Build and Flash

Run idf.py -p PORT build flash monitor to build, flash and monitor the project. A fancy animation will show up on the LCD as expected.

The first time you run idf.py for the example will cost extra time as the build system needs to address the component dependencies and downloads the missing components from registry into managed_components folder.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (0) cpu_start: Starting scheduler on APP CPU.
I (418) example: Turn off LCD backlight
I (418) gpio: GPIO[2]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (428) example: Initialize Intel 8080 bus
I (438) example: Install LCD driver of st7789
I (558) example: Turn on LCD backlight
I (558) example: Initialize LVGL library
I (558) example: Register display driver to LVGL
I (558) example: Install LVGL tick timer
I (558) example: Display LVGL animation

Troubleshooting

For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.