esp-idf/examples/protocols/coap_client
Djordje Nedic facab8c5a7 tools: Increase the minimal supported CMake version to 3.16
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
2022-06-01 06:35:02 +00:00
..
main Fixed the commented out coap_new_optlist() example in the coap_client example. 2022-04-28 18:49:55 +09:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md libcoap_430: Update code for use with libcoap 4.3.0 2021-08-31 12:05:30 +08:00
sdkconfig.defaults libcoap_430: Update code for use with libcoap 4.3.0 2021-08-31 12:05:30 +08:00

CoAP client example

(See the README.md file in the upper level 'examples' directory for more information about examples.) This CoAP client example is very simplified adaptation of one of the libcoap examples.

CoAP client example will connect your ESP32 device to a CoAP server, send off a GET request and fetch the response data from CoAP server. The client can be extended to PUT / POST / DELETE requests, as well as supporting the Observer extensions RFC7641.

If the URI is prefixed with coaps:// instead of coap://, then the CoAP client will attempt to use the DTLS protocol using the defined Pre-Shared Keys(PSK) or Public Key Infrastructure (PKI) which the CoAP server needs to know about.

If the URI is prefixed with coap+tcp://, then the CoAP will try to use TCP for the communication.

NOTE: coaps+tcp:// is not currently supported, even though both libcoap and MbedTLS support it.

The Constrained Application Protocol (CoAP) is a specialized web transfer protocol for use with constrained nodes and constrained networks in the Internet of Things.
The protocol is designed for machine-to-machine (M2M) applications such as smart energy and building automation.

Please refer to RFC7252 for more details.

How to use example

Configure the project

idf.py menuconfig

Example Connection Configuration --->

  • Set WiFi SSID under Example Configuration
  • Set WiFi Password under Example Configuration Example CoAP Client Configuration --->
  • Set CoAP Target Uri
  • If PSK, Set CoAP Preshared Key to use in connection to the server
  • If PSK, Set CoAP PSK Client identity (username) Component config ---> CoAP Configuration --->
    • Set encryption method definition, PSK (default) or PKI
    • Enable CoAP debugging if required High resolution timer (esp_timer) --->
    • Hardware timer to use for esp_timer - change if required (FRC2 for QEMU)

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py build
idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

Prerequisite: we startup a CoAP server on coap server example, or use the default of coap://californium.eclipseprojects.io.

and you could receive data from CoAP server if succeed,
such as the following log:

...
I (332) wifi: mode : sta (30:ae:a4:04:1b:7c)
I (1672) wifi: n:11 0, o:1 0, ap:255 255, sta:11 0, prof:1
I (1672) wifi: state: init -> auth (b0)
I (1682) wifi: state: auth -> assoc (0)
I (1692) wifi: state: assoc -> run (10)
I (1692) wifi: connected with huawei_cw, channel 11
I (1692) wifi: pm start, type: 1

I (2582) event: sta ip: 192.168.3.89, mask: 255.255.255.0, gw: 192.168.3.1
I (2582) CoAP_client: Connected to AP
I (2582) CoAP_client: DNS lookup succeeded. IP=35.185.40.182
Received:
****************************************************************
CoAP RFC 7252                                  Cf 3.0.0-SNAPSHOT
****************************************************************
This server is using the Eclipse Californium (Cf) CoAP framework
published under EPL+EDL: http://www.eclipse.org/californium/

(c) 2014-2020 Institute for Pervasive Computing, ETH Zurich and others
****************************************************************
...

libcoap Documentation

This can be found at libcoap Documentation. The current API is 4.3.0.

libcoap Specific Issues

These can be raised at libcoap Issues.

Troubleshooting

  • Please make sure Target Url includes valid host, optional port, optional path, and begins with coap://, coaps:// or coap+tcp:// for a coap server that supports TCP (not all do including coap+tcp://californium.eclipseprojects.io).

  • CoAP logging can be enabled by running 'idf.py menuconfig -> Component config -> CoAP Configuration' and setting appropriate log level