esp-idf/components/ieee802154/include/esp_ieee802154.h

629 lines
17 KiB
C

/*
* SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "sdkconfig.h"
#include "esp_err.h"
#include "esp_ieee802154_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Initialize the IEEE 802.15.4 subsystem.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*
*/
esp_err_t esp_ieee802154_enable(void);
/**
* @brief Deinitialize the IEEE 802.15.4 subsystem.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_disable(void);
/**
* @brief Get the operational channel.
*
* @return The channel number (11~26).
*
*/
uint8_t esp_ieee802154_get_channel(void);
/**
* @brief Set the operational channel.
*
* @param[in] channel The channel number (11-26).
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_channel(uint8_t channel);
/**
* @brief Get the transmit power.
*
* @return The transmit power in dBm.
*
*/
int8_t esp_ieee802154_get_txpower(void);
/**
* @brief Set the transmit power.
*
* @param[in] power The transmit power in dBm.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_txpower(int8_t power);
/**
* @brief Get the promiscuous mode.
*
* @return
* - True The promiscuous mode is enabled.
* - False The promiscuous mode is disabled.
*
*/
bool esp_ieee802154_get_promiscuous(void);
/**
* @brief Set the promiscuous mode.
*
* @param[in] enable The promiscuous mode to be set.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_promiscuous(bool enable);
/**
* @brief Get the IEEE 802.15.4 Radio state.
*
* @return The IEEE 802.15.4 Radio state, refer to esp_ieee802154_state_t.
*
*/
esp_ieee802154_state_t esp_ieee802154_get_state(void);
/**
* @brief Set the IEEE 802.15.4 Radio to sleep state.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_sleep(void);
/**
* @brief Set the IEEE 802.15.4 Radio to receive state.
*
* @note Radio will continue receiving until it receives a valid frame.
* Refer to `esp_ieee802154_receive_done()`.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_receive(void);
/**
* @brief Transmit the given frame.
* The transmit result will be reported via `esp_ieee802154_transmit_done()`
* or `esp_ieee802154_transmit_failed()`.
*
* @param[in] frame The pointer to the frame, the frame format:
* |-----------------------------------------------------------------------|
* | Len | MHR | MAC Payload | FCS |
* |-----------------------------------------------------------------------|
* @param[in] cca Perform CCA before transmission if it's true, otherwise transmit the frame directly.
*
* @note During transmission, the hardware calculates the FCS, and send it over the air right after the MAC payload,
* so you just need to prepare the length, mac header and mac payload content.
*
* @return
* - ESP_OK on success.
* - ESP_ERR_INVALID_ARG on an invalid frame.
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_transmit(const uint8_t *frame, bool cca);
/**
* @brief Set the time to wait for the ack frame.
*
* @param[in] timeout The time to wait for the ack frame, in symbol unit (16 us).
* Default: 0x006C, Range: 0x0000 - 0xFFFF.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_ack_timeout(uint32_t timeout);
/**
* @brief Get the device PAN ID.
*
* @return The device PAN ID.
*
*/
uint16_t esp_ieee802154_get_panid(void);
/**
* @brief Set the device PAN ID.
*
* @param[in] panid The device PAN ID.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_panid(uint16_t panid);
/**
* @brief Get the device short address.
*
* @return The device short address.
*
*/
uint16_t esp_ieee802154_get_short_address(void);
/**
* @brief Set the device short address.
*
* @param[in] short_address The device short address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_short_address(uint16_t short_address);
/**
* @brief Get the device extended address.
*
* @param[out] ext_addr The pointer to the device extended address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_get_extended_address(uint8_t *ext_addr);
/**
* @brief Set the device extended address.
*
* @param[in] ext_addr The pointer to the device extended address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_extended_address(const uint8_t *ext_addr);
/**
* @brief Get the device PAN ID for specific interface.
*
* @param[in] index The interface index.
*
* @return The device PAN ID.
*
*/
uint16_t esp_ieee802154_get_multipan_panid(esp_ieee802154_multipan_index_t index);
/**
* @brief Set the device PAN ID for specific interface.
*
* @param[in] index The interface index.
* @param[in] panid The device PAN ID.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_multipan_panid(esp_ieee802154_multipan_index_t index, uint16_t panid);
/**
* @brief Get the device short address for specific interface.
*
* @param[in] index The interface index.
*
* @return The device short address.
*
*/
uint16_t esp_ieee802154_get_multipan_short_address(esp_ieee802154_multipan_index_t index);
/**
* @brief Set the device short address for specific interface.
*
* @param[in] index The interface index.
* @param[in] short_address The device short address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_multipan_short_address(esp_ieee802154_multipan_index_t index, uint16_t short_address);
/**
* @brief Get the device extended address for specific interface.
*
* @param[in] index The interface index.
* @param[out] ext_addr The pointer to the device extended address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_get_multipan_extended_address(esp_ieee802154_multipan_index_t index, uint8_t *ext_addr);
/**
* @brief Set the device extended address for specific interface.
*
* @param[in] index The interface index.
* @param[in] ext_addr The pointer to the device extended address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_multipan_extended_address(esp_ieee802154_multipan_index_t index, const uint8_t *ext_addr);
/**
* @brief Get the device current multipan interface enable mask.
*
* @return Current multipan interface enable mask.
*
*/
uint8_t esp_ieee802154_get_multipan_enable(void);
/**
* @brief Enable specific interface for the device.
*
* As an example, call `esp_ieee802154_set_multipan_enable(BIT(ESP_IEEE802154_MULTIPAN_0) | BIT(ESP_IEEE802154_MULTIPAN_1));`
* to enable multipan interface 0 and 1.
*
* @param[in] mask The multipan interface bit mask.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_multipan_enable(uint8_t mask);
/**
* @brief Get the device coordinator.
*
* @return
* - True The coordinator is enabled.
* - False The coordinator is disabled.
*
*/
bool esp_ieee802154_get_coordinator(void);
/**
* @brief Set the device coordinator role.
*
* @param[in] enable The coordinator role to be set.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_coordinator(bool enable);
/**
* @brief Get the auto frame pending mode.
*
* @return The auto frame pending mode, refer to esp_ieee802154_pending_mode_t.
*
*/
esp_ieee802154_pending_mode_t esp_ieee802154_get_pending_mode(void);
/**
* @brief Set the auto frame pending mode.
*
* @param[in] pending_mode The auto frame pending mode, refer to esp_ieee802154_pending_mode_t.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_pending_mode(esp_ieee802154_pending_mode_t pending_mode);
/**
* @brief Add address to the source matching table.
*
* @param[in] addr The pointer to the address.
* @param[in] is_short Short address or Extended address.
*
* @return
* - ESP_OK on success.
* - ESP_ERR_NO_MEM if the pending table is full.
*
*/
esp_err_t esp_ieee802154_add_pending_addr(const uint8_t *addr, bool is_short);
/**
* @brief Remove address from the source matching table.
*
* @param[in] addr The pointer to the address.
* @param[in] is_short Short address or Extended address.
*
* @return
* - ESP_OK on success.
* - ESP_ERR_NOT_FOUND if the address was not found from the source matching table.
*
*/
esp_err_t esp_ieee802154_clear_pending_addr(const uint8_t *addr, bool is_short);
/**
* @brief Clear the source matching table to empty.
*
* @param[in] is_short Clear Short address table or Extended address table.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_reset_pending_table(bool is_short);
/**
* @brief Get the CCA threshold.
*
* @return The CCA threshold in dBm.
*
*/
int8_t esp_ieee802154_get_cca_threshold(void);
/**
* @brief Set the CCA threshold.
*
* @param[in] cca_threshold The CCA threshold in dBm.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_cca_threshold(int8_t cca_threshold);
/**
* @brief Get the CCA mode.
*
* @return The CCA mode, refer to esp_ieee802154_cca_mode_t.
*
*/
esp_ieee802154_cca_mode_t esp_ieee802154_get_cca_mode(void);
/**
* @brief Set the CCA mode.
*
* @param[in] cca_mode The CCA mode, refer to esp_ieee802154_cca_mode_t.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_cca_mode(esp_ieee802154_cca_mode_t cca_mode);
/**
* @brief Enable rx_on_when_idle mode, radio will receive during idle.
*
* @param[in] enable Enable/Disable rx_on_when_idle mode.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_rx_when_idle(bool enable);
/**
* @brief Get the rx_on_when_idle mode.
*
* @return rx_on_when_idle mode.
*
*/
bool esp_ieee802154_get_rx_when_idle(void);
/**
* @brief Perform energy detection.
*
* @param[in] duration The duration of energy detection, in symbol unit (16 us).
* The result will be reported via esp_ieee802154_energy_detect_done().
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_energy_detect(uint32_t duration);
/**
* @brief Notify the IEEE 802.15.4 Radio that the frame is handled done by upper layer.
*
* @param[in] frame The pointer to the frame which was passed from the function `esp_ieee802154_receive_done()`
* or ack frame from `esp_ieee802154_transmit_done()`.
*
* @return
* - ESP_OK on success
* - ESP_FAIL if frame is invalid.
*
*/
esp_err_t esp_ieee802154_receive_handle_done(const uint8_t *frame);
/** Below are the events generated by IEEE 802.15.4 subsystem, which are in ISR context **/
/**
* @brief A Frame was received.
*
* @note User must call the function `esp_ieee802154_receive_handle_done()` to notify 802.15.4 driver after the received frame is handled.
*
* @param[in] frame The point to the received frame, frame format:
* |-----------------------------------------------------------------------|
* | Len | MHR | MAC Payload (no FCS) |
* |-----------------------------------------------------------------------|
* @param[in] frame_info More information of the received frame, refer to esp_ieee802154_frame_info_t.
*
* @note During receiving, the hardware calculates the FCS of the received frame, and may drop it if the FCS doesn't match, only the valid
* frames will be received and notified by esp_ieee802154_receive_done(). Please note that the FCS field is replaced by RSSI and LQI
* value of the received frame.
*
*/
extern void esp_ieee802154_receive_done(uint8_t *frame, esp_ieee802154_frame_info_t *frame_info);
/**
* @brief The SFD field of the frame was received.
*
*/
extern void esp_ieee802154_receive_sfd_done(void);
/**
* @brief The Frame Transmission succeeded.
*
* @note If the ack frame is not null, user must call the function `esp_ieee802154_receive_handle_done()` to notify 802.15.4 driver
* after the ack frame is handled.
*
* @param[in] frame The pointer to the transmitted frame.
* @param[in] ack The received ACK frame, it could be NULL if the transmitted frame's AR bit is not set.
* @param[in] ack_frame_info More information of the ACK frame, refer to esp_ieee802154_frame_info_t.
*
*/
extern void esp_ieee802154_transmit_done(const uint8_t *frame, const uint8_t *ack, esp_ieee802154_frame_info_t *ack_frame_info);
/**
* @brief The Frame Transmission failed. Refer to `esp_ieee802154_transmit()`.
*
* @param[in] frame The pointer to the frame.
* @param[in] error The transmission failure reason, refer to esp_ieee802154_tx_error_t.
*
*/
extern void esp_ieee802154_transmit_failed(const uint8_t *frame, esp_ieee802154_tx_error_t error);
/**
* @brief The SFD field of the frame was transmitted.
*
*/
extern void esp_ieee802154_transmit_sfd_done(uint8_t *frame);
/**
* @brief The energy detection done. Refer to `esp_ieee802154_energy_detect()`.
*
* @param[in] power The detected power level, in dBm.
*
*/
extern void esp_ieee802154_energy_detect_done(int8_t power);
/**
* @brief Set the IEEE 802.15.4 Radio to receive state at a specific time.
*
* @note Radio will start receiving after the timestamp, and continue receiving until it receives a valid frame.
* Refer to `esp_ieee802154_receive_done()`.
*
* @param[in] time A specific timestamp for starting receiving.
* @return
* - ESP_OK on success
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_receive_at(uint32_t time);
/**
* @brief Transmit the given frame at a specific time.
* The transmit result will be reported via `esp_ieee802154_transmit_done()`
* or `esp_ieee802154_transmit_failed()`.
*
* @param[in] frame The pointer to the frame. Refer to `esp_ieee802154_transmit()`.
* @param[in] cca Perform CCA before transmission if it's true, otherwise transmit the frame directly.
* @param[in] time A specific timestamp for starting transmission.
*
* @return
* - ESP_OK on success.
* - ESP_ERR_INVALID_ARG on an invalid frame.
* - ESP_FAIL on failure due to invalid state.
*
*/
esp_err_t esp_ieee802154_transmit_at(const uint8_t *frame, bool cca, uint32_t time);
/**
* @brief Get the RSSI of the most recent received frame.
*
* @return The value of RSSI.
*
*/
int8_t esp_ieee802154_get_recent_rssi(void);
/**
* @brief Get the LQI of the most recent received frame.
*
* @return The value of LQI.
*
*/
uint8_t esp_ieee802154_get_recent_lqi(void);
/**
* @brief Set the key and addr for a frame needs to be encrypted by HW.
*
* @param[in] frame A frame needs to be encrypted. Refer to `esp_ieee802154_transmit()`.
* @param[in] key A 16-bytes key for encryption.
* @param[in] addr An 8-bytes addr for HW to generate nonce, in general, is the device extended address.
*
* @return
* - ESP_OK on success.
* - ESP_FAIL on failure.
*/
esp_err_t esp_ieee802154_set_transmit_security(uint8_t *frame, uint8_t *key, uint8_t *addr);
/**
* @brief This function will be called when a received frame needs to be acked with Enh-Ack, the upper
* layer should generate the Enh-Ack frame in this callback function.
*
* @param[in] frame The received frame.
* @param[in] frame_info The frame information. Refer to `esp_ieee802154_frame_info_t`.
* @param[out] enhack_frame The Enh-ack frame need to be generated via this function, HW will send it back after AIFS.
*
* @return
* - ESP_OK if Enh-Ack generates done.
* - ESP_FAIL if Enh-Ack generates failed.
*
*/
esp_err_t esp_ieee802154_enh_ack_generator(uint8_t *frame, esp_ieee802154_frame_info_t *frame_info, uint8_t* enhack_frame);
/**
* The configurable definitions via Kconfig
*/
#if CONFIG_IEEE802154_TXRX_STATISTIC
/**
* @brief Clear the current IEEE802.15.4 statistic.
*
*/
void esp_ieee802154_txrx_statistic_clear(void);
/**
* @brief Print the current IEEE802.15.4 statistic.
*
*/
void esp_ieee802154_txrx_statistic_print(void);
#endif // CONFIG_IEEE802154_TXRX_STATISTIC
#ifdef __cplusplus
}
#endif