mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
562 lines
16 KiB
C
562 lines
16 KiB
C
/**
|
|
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Group: T0 Control and configuration registers */
|
|
/** Type of txconfig register
|
|
* Timer x configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0: 9;
|
|
/** tx_use_xtal : R/W; bitpos: [9]; default: 0;
|
|
* 1: Use XTAL_CLK as the source clock of timer group. 0: Use APB_CLK as the source
|
|
* clock of timer group.
|
|
*/
|
|
uint32_t tx_use_xtal: 1;
|
|
/** tx_alarm_en : R/W/SC; bitpos: [10]; default: 0;
|
|
* When set, the alarm is enabled. This bit is automatically cleared once an
|
|
* alarm occurs.
|
|
*/
|
|
uint32_t tx_alarm_en: 1;
|
|
uint32_t reserved_11: 1;
|
|
/** tx_divcnt_rst : WT; bitpos: [12]; default: 0;
|
|
* When set, Timer x 's clock divider counter will be reset.
|
|
*/
|
|
uint32_t tx_divcnt_rst: 1;
|
|
/** tx_divider : R/W; bitpos: [28:13]; default: 1;
|
|
* Timer x clock (Tx_clk) prescaler value.
|
|
*/
|
|
uint32_t tx_divider: 16;
|
|
/** tx_autoreload : R/W; bitpos: [29]; default: 1;
|
|
* When set, timer x auto-reload at alarm is enabled.
|
|
*/
|
|
uint32_t tx_autoreload: 1;
|
|
/** tx_increase : R/W; bitpos: [30]; default: 1;
|
|
* When set, the timer x time-base counter will increment every clock tick. When
|
|
* cleared, the timer x time-base counter will decrement.
|
|
*/
|
|
uint32_t tx_increase: 1;
|
|
/** tx_en : R/W; bitpos: [31]; default: 0;
|
|
* When set, the timer x time-base counter is enabled.
|
|
*/
|
|
uint32_t tx_en: 1;
|
|
};
|
|
uint32_t val;
|
|
} timg_txconfig_reg_t;
|
|
|
|
/** Type of txlo register
|
|
* Timer x current value, low 32 bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_lo : RO; bitpos: [31:0]; default: 0;
|
|
* After writing to TIMG_TxUPDATE_REG, the low 32 bits of the time-base counter
|
|
* of timer x can be read here.
|
|
*/
|
|
uint32_t tx_lo: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_txlo_reg_t;
|
|
|
|
/** Type of txhi register
|
|
* Timer $x current value, high 22 bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_hi : RO; bitpos: [21:0]; default: 0;
|
|
* After writing to TIMG_T$xUPDATE_REG, the high 22 bits of the time-base counter
|
|
* of timer $x can be read here.
|
|
*/
|
|
uint32_t tx_hi: 22;
|
|
uint32_t reserved_22: 10;
|
|
};
|
|
uint32_t val;
|
|
} timg_txhi_reg_t;
|
|
|
|
/** Type of txupdate register
|
|
* Write to copy current timer value to TIMGn_T$x_(LO/HI)_REG
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0: 31;
|
|
/** tx_update : R/W/SC; bitpos: [31]; default: 0;
|
|
* After writing 0 or 1 to TIMG_T$xUPDATE_REG, the counter value is latched.
|
|
*/
|
|
uint32_t tx_update: 1;
|
|
};
|
|
uint32_t val;
|
|
} timg_txupdate_reg_t;
|
|
|
|
/** Type of txalarmlo register
|
|
* Timer $x alarm value, low 32 bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_alarm_lo : R/W; bitpos: [31:0]; default: 0;
|
|
* Timer $x alarm trigger time-base counter value, low 32 bits.
|
|
*/
|
|
uint32_t tx_alarm_lo: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_txalarmlo_reg_t;
|
|
|
|
/** Type of txalarmhi register
|
|
* Timer $x alarm value, high bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_alarm_hi : R/W; bitpos: [21:0]; default: 0;
|
|
* Timer $x alarm trigger time-base counter value, high 22 bits.
|
|
*/
|
|
uint32_t tx_alarm_hi: 22;
|
|
uint32_t reserved_22: 10;
|
|
};
|
|
uint32_t val;
|
|
} timg_txalarmhi_reg_t;
|
|
|
|
/** Type of txloadlo register
|
|
* Timer $x reload value, low 32 bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_load_lo : R/W; bitpos: [31:0]; default: 0;
|
|
* Low 32 bits of the value that a reload will load onto timer $x time-base
|
|
* Counter.
|
|
*/
|
|
uint32_t tx_load_lo: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_txloadlo_reg_t;
|
|
|
|
/** Type of txloadhi register
|
|
* Timer $x reload value, high 22 bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_load_hi : R/W; bitpos: [21:0]; default: 0;
|
|
* High 22 bits of the value that a reload will load onto timer $x time-base
|
|
* counter.
|
|
*/
|
|
uint32_t tx_load_hi: 22;
|
|
uint32_t reserved_22: 10;
|
|
};
|
|
uint32_t val;
|
|
} timg_txloadhi_reg_t;
|
|
|
|
/** Type of txload register
|
|
* Write to reload timer from TIMG_T$x_(LOADLOLOADHI)_REG
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** tx_load : WT; bitpos: [31:0]; default: 0;
|
|
*
|
|
* Write any value to trigger a timer $x time-base counter reload.
|
|
*/
|
|
uint32_t tx_load: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_txload_reg_t;
|
|
|
|
|
|
/** Group: WDT Control and configuration registers */
|
|
/** Type of wdtconfig0 register
|
|
* Watchdog timer configuration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0: 12;
|
|
/** wdt_appcpu_reset_en : R/W; bitpos: [12]; default: 0;
|
|
* WDT reset CPU enable.
|
|
*/
|
|
uint32_t wdt_appcpu_reset_en: 1;
|
|
/** wdt_procpu_reset_en : R/W; bitpos: [13]; default: 0;
|
|
* WDT reset CPU enable.
|
|
*/
|
|
uint32_t wdt_procpu_reset_en: 1;
|
|
/** wdt_flashboot_mod_en : R/W; bitpos: [14]; default: 1;
|
|
* When set, Flash boot protection is enabled.
|
|
*/
|
|
uint32_t wdt_flashboot_mod_en: 1;
|
|
/** wdt_sys_reset_length : R/W; bitpos: [17:15]; default: 1;
|
|
* System reset signal length selection. 0: 100 ns, 1: 200 ns,
|
|
* 2: 300 ns, 3: 400 ns, 4: 500 ns, 5: 800 ns, 6: 1.6 us, 7: 3.2 us.
|
|
*/
|
|
uint32_t wdt_sys_reset_length: 3;
|
|
/** wdt_cpu_reset_length : R/W; bitpos: [20:18]; default: 1;
|
|
* CPU reset signal length selection. 0: 100 ns, 1: 200 ns,
|
|
* 2: 300 ns, 3: 400 ns, 4: 500 ns, 5: 800 ns, 6: 1.6 us, 7: 3.2 us.
|
|
*/
|
|
uint32_t wdt_cpu_reset_length: 3;
|
|
/** wdt_use_xtal : R/W; bitpos: [21]; default: 0;
|
|
* choose WDT clock:0-apb_clk; 1-xtal_clk.
|
|
*/
|
|
uint32_t wdt_use_xtal: 1;
|
|
/** wdt_conf_update_en : WT; bitpos: [22]; default: 0;
|
|
* update the WDT configuration registers
|
|
*/
|
|
uint32_t wdt_conf_update_en: 1;
|
|
/** wdt_stg3 : R/W; bitpos: [24:23]; default: 0;
|
|
* Stage 3 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
|
|
*/
|
|
uint32_t wdt_stg3: 2;
|
|
/** wdt_stg2 : R/W; bitpos: [26:25]; default: 0;
|
|
* Stage 2 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
|
|
*/
|
|
uint32_t wdt_stg2: 2;
|
|
/** wdt_stg1 : R/W; bitpos: [28:27]; default: 0;
|
|
* Stage 1 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
|
|
*/
|
|
uint32_t wdt_stg1: 2;
|
|
/** wdt_stg0 : R/W; bitpos: [30:29]; default: 0;
|
|
* Stage 0 configuration. 0: off, 1: interrupt, 2: reset CPU, 3: reset system.
|
|
*/
|
|
uint32_t wdt_stg0: 2;
|
|
/** wdt_en : R/W; bitpos: [31]; default: 0;
|
|
* When set, MWDT is enabled.
|
|
*/
|
|
uint32_t wdt_en: 1;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig0_reg_t;
|
|
|
|
/** Type of wdtconfig1 register
|
|
* Watchdog timer prescaler register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_divcnt_rst : WT; bitpos: [0]; default: 0;
|
|
* When set, WDT 's clock divider counter will be reset.
|
|
*/
|
|
uint32_t wdt_divcnt_rst: 1;
|
|
uint32_t reserved_1: 15;
|
|
/** wdt_clk_prescale : R/W; bitpos: [31:16]; default: 1;
|
|
* MWDT clock prescaler value. MWDT clock period = 12.5 ns *
|
|
* TIMG_WDT_CLK_PRESCALE.
|
|
*/
|
|
uint32_t wdt_clk_prescale: 16;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig1_reg_t;
|
|
|
|
/** Type of wdtconfig2 register
|
|
* Watchdog timer stage 0 timeout value
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_stg0_hold : R/W; bitpos: [31:0]; default: 26000000;
|
|
* Stage 0 timeout value, in MWDT clock cycles.
|
|
*/
|
|
uint32_t wdt_stg0_hold: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig2_reg_t;
|
|
|
|
/** Type of wdtconfig3 register
|
|
* Watchdog timer stage 1 timeout value
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_stg1_hold : R/W; bitpos: [31:0]; default: 134217727;
|
|
* Stage 1 timeout value, in MWDT clock cycles.
|
|
*/
|
|
uint32_t wdt_stg1_hold: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig3_reg_t;
|
|
|
|
/** Type of wdtconfig4 register
|
|
* Watchdog timer stage 2 timeout value
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_stg2_hold : R/W; bitpos: [31:0]; default: 1048575;
|
|
* Stage 2 timeout value, in MWDT clock cycles.
|
|
*/
|
|
uint32_t wdt_stg2_hold: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig4_reg_t;
|
|
|
|
/** Type of wdtconfig5 register
|
|
* Watchdog timer stage 3 timeout value
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_stg3_hold : R/W; bitpos: [31:0]; default: 1048575;
|
|
* Stage 3 timeout value, in MWDT clock cycles.
|
|
*/
|
|
uint32_t wdt_stg3_hold: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtconfig5_reg_t;
|
|
|
|
/** Type of wdtfeed register
|
|
* Write to feed the watchdog timer
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_feed : WT; bitpos: [31:0]; default: 0;
|
|
* Write any value to feed the MWDT. (WO)
|
|
*/
|
|
uint32_t wdt_feed: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtfeed_reg_t;
|
|
|
|
/** Type of wdtwprotect register
|
|
* Watchdog write protect register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** wdt_wkey : R/W; bitpos: [31:0]; default: 1356348065;
|
|
* If the register contains a different value than its reset value, write
|
|
* protection is enabled.
|
|
*/
|
|
uint32_t wdt_wkey: 32;
|
|
};
|
|
uint32_t val;
|
|
} timg_wdtwprotect_reg_t;
|
|
|
|
|
|
/** Group: RTC CALI Control and configuration registers */
|
|
/** Type of rtccalicfg register
|
|
* RTC calibration configure register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0: 12;
|
|
/** rtc_cali_start_cycling : R/W; bitpos: [12]; default: 1;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_start_cycling: 1;
|
|
/** rtc_cali_clk_sel : R/W; bitpos: [14:13]; default: 1;
|
|
* 0:rtc slow clock. 1:clk_8m, 2:xtal_32k.
|
|
*/
|
|
uint32_t rtc_cali_clk_sel: 2;
|
|
/** rtc_cali_rdy : RO; bitpos: [15]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_rdy: 1;
|
|
/** rtc_cali_max : R/W; bitpos: [30:16]; default: 1;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_max: 15;
|
|
/** rtc_cali_start : R/W; bitpos: [31]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_start: 1;
|
|
};
|
|
uint32_t val;
|
|
} timg_rtccalicfg_reg_t;
|
|
|
|
/** Type of rtccalicfg1 register
|
|
* RTC calibration configure1 register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** rtc_cali_cycling_data_vld : RO; bitpos: [0]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_cycling_data_vld: 1;
|
|
uint32_t reserved_1: 6;
|
|
/** rtc_cali_value : RO; bitpos: [31:7]; default: 0;
|
|
* Reserved
|
|
*/
|
|
uint32_t rtc_cali_value: 25;
|
|
};
|
|
uint32_t val;
|
|
} timg_rtccalicfg1_reg_t;
|
|
|
|
/** Type of rtccalicfg2 register
|
|
* Timer group calibration register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** rtc_cali_timeout : RO; bitpos: [0]; default: 0;
|
|
* RTC calibration timeout indicator
|
|
*/
|
|
uint32_t rtc_cali_timeout: 1;
|
|
uint32_t reserved_1: 2;
|
|
/** rtc_cali_timeout_rst_cnt : R/W; bitpos: [6:3]; default: 3;
|
|
* Cycles that release calibration timeout reset
|
|
*/
|
|
uint32_t rtc_cali_timeout_rst_cnt: 4;
|
|
/** rtc_cali_timeout_thres : R/W; bitpos: [31:7]; default: 33554431;
|
|
* Threshold value for the RTC calibration timer. If the calibration timer's value
|
|
* exceeds this threshold, a timeout is triggered.
|
|
*/
|
|
uint32_t rtc_cali_timeout_thres: 25;
|
|
};
|
|
uint32_t val;
|
|
} timg_rtccalicfg2_reg_t;
|
|
|
|
|
|
/** Group: Interrupt registers */
|
|
/** Type of int_ena_timers register
|
|
* Interrupt enable bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** t0_int_ena : R/W; bitpos: [0]; default: 0;
|
|
* The interrupt enable bit for the TIMG_T$x_INT interrupt.
|
|
*/
|
|
uint32_t t0_int_ena: 1;
|
|
/** wdt_int_ena : R/W; bitpos: [1]; default: 0;
|
|
* The interrupt enable bit for the TIMG_WDT_INT interrupt.
|
|
*/
|
|
uint32_t wdt_int_ena: 1;
|
|
uint32_t reserved_2: 30;
|
|
};
|
|
uint32_t val;
|
|
} timg_int_ena_timers_reg_t;
|
|
|
|
/** Type of int_raw_timers register
|
|
* Raw interrupt status
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** t0_int_raw : R/SS/WTC; bitpos: [0]; default: 0;
|
|
* The raw interrupt status bit for the TIMG_T$x_INT interrupt.
|
|
*/
|
|
uint32_t t0_int_raw: 1;
|
|
/** wdt_int_raw : R/SS/WTC; bitpos: [1]; default: 0;
|
|
* The raw interrupt status bit for the TIMG_WDT_INT interrupt.
|
|
*/
|
|
uint32_t wdt_int_raw: 1;
|
|
uint32_t reserved_2: 30;
|
|
};
|
|
uint32_t val;
|
|
} timg_int_raw_timers_reg_t;
|
|
|
|
/** Type of int_st_timers register
|
|
* Masked interrupt status
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** t0_int_st : RO; bitpos: [0]; default: 0;
|
|
* The masked interrupt status bit for the TIMG_T$x_INT interrupt.
|
|
*/
|
|
uint32_t t0_int_st: 1;
|
|
/** wdt_int_st : RO; bitpos: [1]; default: 0;
|
|
* The masked interrupt status bit for the TIMG_WDT_INT interrupt.
|
|
*/
|
|
uint32_t wdt_int_st: 1;
|
|
uint32_t reserved_2: 30;
|
|
};
|
|
uint32_t val;
|
|
} timg_int_st_timers_reg_t;
|
|
|
|
/** Type of int_clr_timers register
|
|
* Interrupt clear bits
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** t0_int_clr : WT; bitpos: [0]; default: 0;
|
|
* Set this bit to clear the TIMG_T$x_INT interrupt.
|
|
*/
|
|
uint32_t t0_int_clr: 1;
|
|
/** wdt_int_clr : WT; bitpos: [1]; default: 0;
|
|
* Set this bit to clear the TIMG_WDT_INT interrupt.
|
|
*/
|
|
uint32_t wdt_int_clr: 1;
|
|
uint32_t reserved_2: 30;
|
|
};
|
|
uint32_t val;
|
|
} timg_int_clr_timers_reg_t;
|
|
|
|
|
|
/** Group: Version register */
|
|
/** Type of ntimers_date register
|
|
* Timer version control register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** ntimgs_date : R/W; bitpos: [27:0]; default: 33579409;
|
|
* Timer version control register
|
|
*/
|
|
uint32_t ntimgs_date: 28;
|
|
uint32_t reserved_28: 4;
|
|
};
|
|
uint32_t val;
|
|
} timg_ntimers_date_reg_t;
|
|
|
|
|
|
/** Group: Clock configuration registers */
|
|
/** Type of regclk register
|
|
* Timer group clock gate register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0: 29;
|
|
/** wdt_clk_is_active : R/W; bitpos: [29]; default: 1;
|
|
* enable WDT's clock
|
|
*/
|
|
uint32_t wdt_clk_is_active: 1;
|
|
/** timer_clk_is_active : R/W; bitpos: [30]; default: 1;
|
|
* enable Timer $x's clock
|
|
*/
|
|
uint32_t timer_clk_is_active: 1;
|
|
/** clk_en : R/W; bitpos: [31]; default: 0;
|
|
* Register clock gate signal. 1: Registers can be read and written to by software. 0:
|
|
* Registers can not be read or written to by software.
|
|
*/
|
|
uint32_t clk_en: 1;
|
|
};
|
|
uint32_t val;
|
|
} timg_regclk_reg_t;
|
|
|
|
typedef struct {
|
|
volatile timg_txconfig_reg_t config;
|
|
volatile timg_txlo_reg_t lo;
|
|
volatile timg_txhi_reg_t hi;
|
|
volatile timg_txupdate_reg_t update;
|
|
volatile timg_txalarmlo_reg_t alarmlo;
|
|
volatile timg_txalarmhi_reg_t alarmhi;
|
|
volatile timg_txloadlo_reg_t loadlo;
|
|
volatile timg_txloadhi_reg_t loadhi;
|
|
volatile timg_txload_reg_t load;
|
|
} timg_hwtimer_reg_t;
|
|
|
|
typedef struct timg_dev_t {
|
|
volatile timg_hwtimer_reg_t hw_timer[1];
|
|
uint32_t reserved_024[9];
|
|
volatile timg_wdtconfig0_reg_t wdtconfig0;
|
|
volatile timg_wdtconfig1_reg_t wdtconfig1;
|
|
volatile timg_wdtconfig2_reg_t wdtconfig2;
|
|
volatile timg_wdtconfig3_reg_t wdtconfig3;
|
|
volatile timg_wdtconfig4_reg_t wdtconfig4;
|
|
volatile timg_wdtconfig5_reg_t wdtconfig5;
|
|
volatile timg_wdtfeed_reg_t wdtfeed;
|
|
volatile timg_wdtwprotect_reg_t wdtwprotect;
|
|
volatile timg_rtccalicfg_reg_t rtccalicfg;
|
|
volatile timg_rtccalicfg1_reg_t rtccalicfg1;
|
|
volatile timg_int_ena_timers_reg_t int_ena_timers;
|
|
volatile timg_int_raw_timers_reg_t int_raw_timers;
|
|
volatile timg_int_st_timers_reg_t int_st_timers;
|
|
volatile timg_int_clr_timers_reg_t int_clr_timers;
|
|
volatile timg_rtccalicfg2_reg_t rtccalicfg2;
|
|
uint32_t reserved_084[29];
|
|
volatile timg_ntimers_date_reg_t ntimers_date;
|
|
volatile timg_regclk_reg_t regclk;
|
|
} timg_dev_t;
|
|
|
|
extern timg_dev_t TIMERG0;
|
|
extern timg_dev_t TIMERG1;
|
|
|
|
#ifndef __cplusplus
|
|
_Static_assert(sizeof(timg_dev_t) == 0x100, "Invalid size of timg_dev_t structure");
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|