mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
854e16feb3
That can be used with linux target on lwip to pass packets from lwip to linux host networking stack, e.g. routing the trafic to internet.
354 lines
14 KiB
Plaintext
354 lines
14 KiB
Plaintext
menu "Example Connection Configuration"
|
|
|
|
orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"
|
|
|
|
config EXAMPLE_CONNECT_WIFI
|
|
bool "connect using WiFi interface"
|
|
depends on !IDF_TARGET_LINUX
|
|
default y
|
|
help
|
|
Protocol examples can use Wi-Fi and/or Ethernet to connect to the network.
|
|
Choose this option to connect with WiFi
|
|
|
|
if EXAMPLE_CONNECT_WIFI
|
|
config EXAMPLE_WIFI_SSID_PWD_FROM_STDIN
|
|
bool "Get ssid and password from stdin"
|
|
default n
|
|
help
|
|
Give the WiFi SSID and password from stdin.
|
|
|
|
config EXAMPLE_PROVIDE_WIFI_CONSOLE_CMD
|
|
depends on !EXAMPLE_WIFI_SSID_PWD_FROM_STDIN
|
|
bool "Provide wifi connect commands"
|
|
default y
|
|
help
|
|
Provide wifi connect commands for esp_console.
|
|
Please use `example_register_wifi_connect_commands` to register them.
|
|
|
|
config EXAMPLE_WIFI_SSID
|
|
depends on !EXAMPLE_WIFI_SSID_PWD_FROM_STDIN
|
|
string "WiFi SSID"
|
|
default "myssid"
|
|
help
|
|
SSID (network name) for the example to connect to.
|
|
|
|
config EXAMPLE_WIFI_PASSWORD
|
|
depends on !EXAMPLE_WIFI_SSID_PWD_FROM_STDIN
|
|
string "WiFi Password"
|
|
default "mypassword"
|
|
help
|
|
WiFi password (WPA or WPA2) for the example to use.
|
|
Can be left blank if the network has no security set.
|
|
|
|
config EXAMPLE_WIFI_CONN_MAX_RETRY
|
|
int "Maximum retry"
|
|
default 6
|
|
help
|
|
Set the Maximum retry to avoid station reconnecting to the AP unlimited,
|
|
in case the AP is really inexistent.
|
|
|
|
choice EXAMPLE_WIFI_SCAN_METHOD
|
|
prompt "WiFi Scan Method"
|
|
default EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
|
help
|
|
WiFi scan method:
|
|
|
|
If "Fast" is selected, scan will end after find SSID match AP.
|
|
|
|
If "All Channel" is selected, scan will end after scan all the channel.
|
|
|
|
config EXAMPLE_WIFI_SCAN_METHOD_FAST
|
|
bool "Fast"
|
|
config EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
|
bool "All Channel"
|
|
endchoice
|
|
|
|
menu "WiFi Scan threshold"
|
|
config EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD
|
|
int "WiFi minimum rssi"
|
|
range -127 0
|
|
|
|
default -127
|
|
help
|
|
The minimum rssi to accept in the scan mode.
|
|
|
|
choice EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD
|
|
prompt "WiFi Scan auth mode threshold"
|
|
default EXAMPLE_WIFI_AUTH_OPEN
|
|
help
|
|
The weakest authmode to accept in the scan mode.
|
|
|
|
config EXAMPLE_WIFI_AUTH_OPEN
|
|
bool "OPEN"
|
|
config EXAMPLE_WIFI_AUTH_WEP
|
|
bool "WEP"
|
|
config EXAMPLE_WIFI_AUTH_WPA_PSK
|
|
bool "WPA PSK"
|
|
config EXAMPLE_WIFI_AUTH_WPA2_PSK
|
|
bool "WPA2 PSK"
|
|
config EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK
|
|
bool "WPA WPA2 PSK"
|
|
config EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE
|
|
bool "WPA2 ENTERPRISE"
|
|
config EXAMPLE_WIFI_AUTH_WPA3_PSK
|
|
bool "WPA3 PSK"
|
|
config EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK
|
|
bool "WPA2 WPA3 PSK"
|
|
config EXAMPLE_WIFI_AUTH_WAPI_PSK
|
|
bool "WAPI PSK"
|
|
endchoice
|
|
endmenu
|
|
|
|
choice EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD
|
|
prompt "WiFi Connect AP Sort Method"
|
|
default EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
|
help
|
|
WiFi connect AP sort method:
|
|
|
|
If "Signal" is selected, Sort matched APs in scan list by RSSI.
|
|
|
|
If "Security" is selected, Sort matched APs in scan list by security mode.
|
|
|
|
config EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
|
bool "Signal"
|
|
config EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY
|
|
bool "Security"
|
|
endchoice
|
|
endif
|
|
|
|
config EXAMPLE_CONNECT_ETHERNET
|
|
bool "connect using Ethernet interface"
|
|
depends on !IDF_TARGET_LINUX
|
|
default n
|
|
help
|
|
Protocol examples can use Wi-Fi and/or Ethernet to connect to the network.
|
|
Choose this option to connect with Ethernet
|
|
|
|
if EXAMPLE_CONNECT_ETHERNET
|
|
config EXAMPLE_ETHERNET_EMAC_TASK_STACK_SIZE
|
|
int "emac_rx task stack size"
|
|
default 2048
|
|
help
|
|
This set stack size for emac_rx task
|
|
|
|
config EXAMPLE_USE_SPI_ETHERNET
|
|
bool
|
|
|
|
choice EXAMPLE_ETHERNET_TYPE
|
|
prompt "Ethernet Type"
|
|
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
|
|
default EXAMPLE_USE_W5500
|
|
help
|
|
Select which kind of Ethernet will be used in the example.
|
|
|
|
config EXAMPLE_USE_INTERNAL_ETHERNET
|
|
depends on IDF_TARGET_ESP32
|
|
select ETH_USE_ESP32_EMAC
|
|
bool "Internal EMAC"
|
|
help
|
|
Select internal Ethernet MAC controller.
|
|
|
|
config EXAMPLE_USE_DM9051
|
|
bool "DM9051 Module"
|
|
select EXAMPLE_USE_SPI_ETHERNET
|
|
select ETH_USE_SPI_ETHERNET
|
|
select ETH_SPI_ETHERNET_DM9051
|
|
help
|
|
Select external SPI-Ethernet module.
|
|
|
|
config EXAMPLE_USE_W5500
|
|
bool "W5500 Module"
|
|
select EXAMPLE_USE_SPI_ETHERNET
|
|
select ETH_USE_SPI_ETHERNET
|
|
select ETH_SPI_ETHERNET_W5500
|
|
help
|
|
Select external SPI-Ethernet module (W5500).
|
|
|
|
config EXAMPLE_USE_OPENETH
|
|
bool "OpenCores Ethernet MAC (EXPERIMENTAL)"
|
|
select ETH_USE_OPENETH
|
|
help
|
|
When this option is enabled, the example is built with support for
|
|
OpenCores Ethernet MAC, which allows testing the example in QEMU.
|
|
Note that this option is used for internal testing purposes, and
|
|
not officially supported. Examples built with this option enabled
|
|
will not run on a real ESP32 chip.
|
|
|
|
endchoice # EXAMPLE_ETHERNET_TYPE
|
|
|
|
if EXAMPLE_USE_INTERNAL_ETHERNET
|
|
choice EXAMPLE_ETH_PHY_MODEL
|
|
prompt "Ethernet PHY Device"
|
|
default EXAMPLE_ETH_PHY_IP101
|
|
help
|
|
Select the Ethernet PHY device to use in the example.
|
|
|
|
config EXAMPLE_ETH_PHY_IP101
|
|
bool "IP101"
|
|
help
|
|
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
|
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
|
|
|
config EXAMPLE_ETH_PHY_RTL8201
|
|
bool "RTL8201/SR8201"
|
|
help
|
|
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
|
|
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
|
|
|
|
config EXAMPLE_ETH_PHY_LAN87XX
|
|
bool "LAN87xx"
|
|
help
|
|
Below chips are supported:
|
|
LAN8710A is a small footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
|
flexPWR® Technology.
|
|
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
|
|
LAN8740A/LAN8741A is a small footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver
|
|
with HP Auto-MDIX and flexPWR® Technology.
|
|
LAN8742A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
|
flexPWR® Technology.
|
|
Goto https://www.microchip.com for more information about them.
|
|
|
|
config EXAMPLE_ETH_PHY_DP83848
|
|
bool "DP83848"
|
|
help
|
|
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
|
|
Goto http://www.ti.com/product/DP83848J for more information about it.
|
|
|
|
config EXAMPLE_ETH_PHY_KSZ80XX
|
|
bool "KSZ80xx"
|
|
help
|
|
With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
|
|
Ethernet Physical Layer Tranceivers (PHY).
|
|
The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
|
|
KSZ8051, KSZ8061, KSZ8081, KSZ8091
|
|
Goto https://www.microchip.com for more information about them.
|
|
endchoice
|
|
|
|
config EXAMPLE_ETH_MDC_GPIO
|
|
int "SMI MDC GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
|
default 23
|
|
help
|
|
Set the GPIO number used by SMI MDC.
|
|
|
|
config EXAMPLE_ETH_MDIO_GPIO
|
|
int "SMI MDIO GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
|
default 18
|
|
help
|
|
Set the GPIO number used by SMI MDIO.
|
|
endif
|
|
|
|
if EXAMPLE_USE_SPI_ETHERNET
|
|
config EXAMPLE_ETH_SPI_HOST
|
|
int "SPI Host Number"
|
|
range 0 2
|
|
default 1
|
|
help
|
|
Set the SPI host used to communicate with the SPI Ethernet Controller.
|
|
|
|
config EXAMPLE_ETH_SPI_SCLK_GPIO
|
|
int "SPI SCLK GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
|
default 14
|
|
help
|
|
Set the GPIO number used by SPI SCLK.
|
|
|
|
config EXAMPLE_ETH_SPI_MOSI_GPIO
|
|
int "SPI MOSI GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
|
default 13
|
|
help
|
|
Set the GPIO number used by SPI MOSI.
|
|
|
|
config EXAMPLE_ETH_SPI_MISO_GPIO
|
|
int "SPI MISO GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
|
default 12
|
|
help
|
|
Set the GPIO number used by SPI MISO.
|
|
|
|
config EXAMPLE_ETH_SPI_CS_GPIO
|
|
int "SPI CS GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
|
default 15
|
|
help
|
|
Set the GPIO number used by SPI CS.
|
|
|
|
config EXAMPLE_ETH_SPI_CLOCK_MHZ
|
|
int "SPI clock speed (MHz)"
|
|
range 5 80
|
|
default 36
|
|
help
|
|
Set the clock speed (MHz) of SPI interface.
|
|
|
|
config EXAMPLE_ETH_SPI_INT_GPIO
|
|
int "Interrupt GPIO number"
|
|
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
|
default 4
|
|
help
|
|
Set the GPIO number used by the SPI Ethernet module interrupt line.
|
|
endif # EXAMPLE_USE_SPI_ETHERNET
|
|
|
|
config EXAMPLE_ETH_PHY_RST_GPIO
|
|
int "PHY Reset GPIO number"
|
|
range -1 ENV_GPIO_OUT_RANGE_MAX
|
|
default 5
|
|
help
|
|
Set the GPIO number used to reset PHY chip.
|
|
Set to -1 to disable PHY chip hardware reset.
|
|
|
|
config EXAMPLE_ETH_PHY_ADDR
|
|
int "PHY Address"
|
|
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
|
|
default 1
|
|
help
|
|
Set PHY address according your board schematic.
|
|
endif # EXAMPLE_CONNECT_ETHERNET
|
|
|
|
config EXAMPLE_CONNECT_IPV6
|
|
depends on EXAMPLE_CONNECT_WIFI || EXAMPLE_CONNECT_ETHERNET
|
|
bool "Obtain IPv6 address"
|
|
default y
|
|
select LWIP_IPV6
|
|
help
|
|
By default, examples will wait until IPv4 and IPv6 local link addresses are obtained.
|
|
Disable this option if the network does not support IPv6.
|
|
Choose the preferred IPv6 address type if the connection code should wait until other than
|
|
the local link address gets assigned.
|
|
Consider enabling IPv6 stateless address autoconfiguration (SLAAC) in the LWIP component.
|
|
|
|
if EXAMPLE_CONNECT_IPV6
|
|
choice EXAMPLE_CONNECT_PREFERRED_IPV6
|
|
prompt "Preferred IPv6 Type"
|
|
default EXAMPLE_CONNECT_IPV6_PREF_LOCAL_LINK
|
|
help
|
|
Select which kind of IPv6 address the connect logic waits for.
|
|
|
|
config EXAMPLE_CONNECT_IPV6_PREF_LOCAL_LINK
|
|
bool "Local Link Address"
|
|
help
|
|
Blocks until Local link address assigned.
|
|
|
|
config EXAMPLE_CONNECT_IPV6_PREF_GLOBAL
|
|
bool "Global Address"
|
|
help
|
|
Blocks until Global address assigned.
|
|
|
|
config EXAMPLE_CONNECT_IPV6_PREF_SITE_LOCAL
|
|
bool "Site Local Address"
|
|
help
|
|
Blocks until Site link address assigned.
|
|
|
|
config EXAMPLE_CONNECT_IPV6_PREF_UNIQUE_LOCAL
|
|
bool "Unique Local Link Address"
|
|
help
|
|
Blocks until Unique local address assigned.
|
|
|
|
endchoice
|
|
|
|
endif
|
|
|
|
|
|
endmenu
|