mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
140 lines
10 KiB
Markdown
140 lines
10 KiB
Markdown
| Supported Targets | ESP32-P4 |
|
|
| ----------------- | -------- |
|
|
|
|
|
|
# Camera display via DSI example
|
|
|
|
## Overview
|
|
|
|
This example demonstrates how to use the esp_driver_cam component to capture camera sensor signals and display it via DSI interface.
|
|
|
|
## Usage
|
|
|
|
The subsections below give only absolutely necessary information. For full steps to configure ESP-IDF and use it to build and run projects, see [ESP-IDF Getting Started](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#get-started).
|
|
|
|
|
|
### Hardware Required
|
|
|
|
This example requires:
|
|
|
|
- OV5647 camera sensor with VCM (Voice Coil Motor). The VCM used in this example is DW9714.
|
|
- ILI9881C LCD screen
|
|
- ESP32P4 devkit
|
|
|
|
|
|
GND GND
|
|
┌────────────────────────────────────────────────┐ ┌─────────────────────────────────────────────────────────┐
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ │ │ │
|
|
│ ┌───────────────┴─────────────┴──────────────────┐ │
|
|
│ │ │ ┌──────────┴───────────┐
|
|
│ │ │ DSI DATA 1P │ │
|
|
│ │ ├───────────────────────────┤ │
|
|
┌───────────┴─────────┐ CSI DATA 1P │ │ │ │
|
|
│ ├──────────────────────┤ │ DSI DATA 1N │ │
|
|
│ │ │ ├───────────────────────────┤ │
|
|
│ │ CSI DATA 1N │ ESP32-P4 │ │ │
|
|
│ OV5647 ├──────────────────────┤ │ DSI CLK N │ ILI9881C │
|
|
│ │ │ ├───────────────────────────┤ │
|
|
│ │ CSI CLK N │ │ │ │
|
|
│ ├──────────────────────┤ │ DSI CLK P │ │
|
|
│ │ │ ├───────────────────────────┤ │
|
|
│ │ CSI CLK P │ │ │ │
|
|
│ ├──────────────────────┤ │ DSI DATA 0P │ │
|
|
│ │ │ ├───────────────────────────┤ │
|
|
│ │ CSI DATA 0P │ │ │ │
|
|
│ ├──────────────────────┤ │ DSI DATA 0N │ │
|
|
│ │ │ ├───────────────────────────┤ │
|
|
│ │ CSI DATA 0N │ │ │ │
|
|
│ ├──────────────────────┤ │ └──────────────────────┘
|
|
│ │ │ │
|
|
└───────┬──┬──────────┘ │ │
|
|
│ │ I2C SCL │ │
|
|
│ └─────────────────────────────────┤ │
|
|
│ I2C SDA │ │
|
|
└────────────────────────────────────┤ │
|
|
└────────────────────────────────────────────────┘
|
|
|
|
|
|
### Set Chip Target
|
|
|
|
First of all, your target must be supported by both:
|
|
|
|
- **By your ESP-IDF version**: For the full list of supported targets, run:
|
|
```
|
|
idf.py --list-targets
|
|
```
|
|
- **By this example**: For the full list of supported targets, refer to the supported targets table at the top of this README.
|
|
|
|
After you make sure that your target is supported, go to your example project directory and [set the chip target](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/tools/idf-py.html#select-the-target-chip-set-target):
|
|
|
|
```
|
|
idf.py set-target <target>
|
|
```
|
|
|
|
For example, to set esp32-P4 as the chip target, run:
|
|
|
|
```
|
|
idf.py set-target esp32p4
|
|
```
|
|
|
|
|
|
### Configure the Project
|
|
|
|
For information about Kconfig options, see [Project Configuration](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html) > _Name of relevant section(s)_.
|
|
|
|
To conveniently check or modify Kconfig options for this example in a project configuration menu, run:
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
```
|
|
Set CONFIG_CAMERA_OV5647 to y
|
|
```
|
|
|
|
|
|
### Build and Flash
|
|
|
|
Execute the following command to build the project, flash it to your development board, and run the monitor tool to view the serial output:
|
|
|
|
```
|
|
idf.py build flash monitor
|
|
```
|
|
|
|
This command can be reduced to `idf.py flash monitor`.
|
|
|
|
If the above command fails, check the log on the serial monitor which usually provides information on the possible cause of the issue.
|
|
|
|
To exit the serial monitor, use `Ctrl` + `]`.
|
|
|
|
|
|
## Example Output
|
|
|
|
If you see the following console output, your example should be running correctly:
|
|
|
|
```
|
|
I (1085) main_task: Calling app_main()
|
|
I (1095) ili9881c: ID1: 0x98, ID2: 0x81, ID3: 0x5c
|
|
I (1125) gpio: GPIO[31]| InputEn: 1| OutputEn: 1| OpenDrain: 1| Pullup: 1| Pulldown: 0| Intr:0
|
|
I (1125) gpio: GPIO[34]| InputEn: 1| OutputEn: 1| OpenDrain: 1| Pullup: 1| Pulldown: 0| Intr:0
|
|
I (1295) ov5647: Detected Camera sensor PID=0x5647 with index 0
|
|
I (1305) cam_dsi: fmt[0].name:MIPI_2lane_24Minput_RAW8_800x1280_50fps
|
|
I (1305) cam_dsi: fmt[1].name:MIPI_2lane_24Minput_RAW8_800x640_50fps
|
|
I (1315) cam_dsi: fmt[2].name:MIPI_2lane_24Minput_RAW8_800x800_50fps
|
|
I (1355) cam_dsi: Format in use:MIPI_2lane_24Minput_RAW8_800x640_50fps
|
|
```
|
|
|
|
|
|
## Reference
|
|
|
|
- Link to the ESP-IDF feature's API reference, for example [ESP-IDF: Camera Controller Driver](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/camera_driver.html)
|
|
- [ESP-IDF Getting Started](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#get-started)
|
|
- [Project Configuration](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html) (Kconfig Options)
|