esp-idf/components/esp_rom/include/esp32s3/rom/rtc.h

250 lines
10 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* SPDX-FileCopyrightText: 2019-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include <stdint.h>
#include "esp_assert.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/reset_reasons.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup rtc_apis, rtc registers and memory related apis
* @brief rtc apis
*/
/** @addtogroup rtc_apis
* @{
*/
/**************************************************************************************
* Note: *
* Some Rtc memory and registers are used, in ROM or in internal library. *
* Please do not use reserved or used rtc memory or registers. *
* *
*************************************************************************************
* RTC Memory & Store Register usage
*************************************************************************************
* rtc memory addr type size usage
* 0x3f421000(0x50000000) Slow SIZE_CP Co-Processor code/Reset Entry
* 0x3f421000+SIZE_CP Slow 8192-SIZE_CP
*
* 0x3ff80000(0x40070000) Fast 8192 deep sleep entry code
*
*************************************************************************************
* RTC store registers usage
* RTC_CNTL_STORE0_REG Reserved
* RTC_CNTL_STORE1_REG RTC_SLOW_CLK calibration value
* RTC_CNTL_STORE2_REG Boot time, low word
* RTC_CNTL_STORE3_REG Boot time, high word
* RTC_CNTL_STORE4_REG External XTAL frequency
* RTC_CNTL_STORE5_REG FAST_RTC_MEMORY_LENGTH
* RTC_CNTL_STORE6_REG FAST_RTC_MEMORY_ENTRY
* RTC_CNTL_STORE7_REG FAST_RTC_MEMORY_CRC
*************************************************************************************
*/
#define RTC_SLOW_CLK_CAL_REG RTC_CNTL_STORE1_REG
#define RTC_BOOT_TIME_LOW_REG RTC_CNTL_STORE2_REG
#define RTC_BOOT_TIME_HIGH_REG RTC_CNTL_STORE3_REG
#define RTC_XTAL_FREQ_REG RTC_CNTL_STORE4_REG
#define RTC_ENTRY_LENGTH_REG RTC_CNTL_STORE5_REG
#define RTC_ENTRY_ADDR_REG RTC_CNTL_STORE6_REG
#define RTC_RESET_CAUSE_REG RTC_CNTL_STORE6_REG
#define RTC_MEMORY_CRC_REG RTC_CNTL_STORE7_REG
#define RTC_DISABLE_ROM_LOG ((1 << 0) | (1 << 16)) //!< Disable logging from the ROM code.
typedef enum {
AWAKE = 0, //<CPU ON
LIGHT_SLEEP = BIT0, //CPU waiti, PLL ON. We don't need explicitly set this mode.
DEEP_SLEEP = BIT1 //CPU OFF, PLL OFF, only specific timer could wake up
} SLEEP_MODE;
typedef enum {
NO_MEAN = 0,
POWERON_RESET = 1, /**<1, Vbat power on reset*/
RTC_SW_SYS_RESET = 3, /**<3, Software reset digital core*/
DEEPSLEEP_RESET = 5, /**<5, Deep Sleep reset digital core*/
TG0WDT_SYS_RESET = 7, /**<7, Timer Group0 Watch dog reset digital core*/
TG1WDT_SYS_RESET = 8, /**<8, Timer Group1 Watch dog reset digital core*/
RTCWDT_SYS_RESET = 9, /**<9, RTC Watch dog Reset digital core*/
INTRUSION_RESET = 10, /**<10, Instrusion tested to reset CPU*/
TG0WDT_CPU_RESET = 11, /**<11, Time Group0 reset CPU*/
RTC_SW_CPU_RESET = 12, /**<12, Software reset CPU*/
RTCWDT_CPU_RESET = 13, /**<13, RTC Watch dog Reset CPU*/
RTCWDT_BROWN_OUT_RESET = 15, /**<15, Reset when the vdd voltage is not stable*/
RTCWDT_RTC_RESET = 16, /**<16, RTC Watch dog reset digital core and rtc module*/
TG1WDT_CPU_RESET = 17, /**<17, Time Group1 reset CPU*/
SUPER_WDT_RESET = 18, /**<18, super watchdog reset digital core and rtc module*/
GLITCH_RTC_RESET = 19, /**<19, glitch reset digital core and rtc module*/
EFUSE_RESET = 20, /**<20, efuse reset digital core*/
USB_UART_CHIP_RESET = 21, /**<21, usb uart reset digital core */
USB_JTAG_CHIP_RESET = 22, /**<22, usb jtag reset digital core */
POWER_GLITCH_RESET = 23, /**<23, power glitch reset digital core and rtc module*/
} RESET_REASON;
// Check if the reset reason defined in ROM is compatible with soc/reset_reasons.h
ESP_STATIC_ASSERT((soc_reset_reason_t)POWERON_RESET == RESET_REASON_CHIP_POWER_ON, "POWERON_RESET != RESET_REASON_CHIP_POWER_ON");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTC_SW_SYS_RESET == RESET_REASON_CORE_SW, "RTC_SW_SYS_RESET != RESET_REASON_CORE_SW");
ESP_STATIC_ASSERT((soc_reset_reason_t)DEEPSLEEP_RESET == RESET_REASON_CORE_DEEP_SLEEP, "DEEPSLEEP_RESET != RESET_REASON_CORE_DEEP_SLEEP");
ESP_STATIC_ASSERT((soc_reset_reason_t)TG0WDT_SYS_RESET == RESET_REASON_CORE_MWDT0, "TG0WDT_SYS_RESET != RESET_REASON_CORE_MWDT0");
ESP_STATIC_ASSERT((soc_reset_reason_t)TG1WDT_SYS_RESET == RESET_REASON_CORE_MWDT1, "TG1WDT_SYS_RESET != RESET_REASON_CORE_MWDT1");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTCWDT_SYS_RESET == RESET_REASON_CORE_RTC_WDT, "RTCWDT_SYS_RESET != RESET_REASON_CORE_RTC_WDT");
ESP_STATIC_ASSERT((soc_reset_reason_t)TG0WDT_CPU_RESET == RESET_REASON_CPU0_MWDT0, "TG0WDT_CPU_RESET != RESET_REASON_CPU0_MWDT0");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTC_SW_CPU_RESET == RESET_REASON_CPU0_SW, "RTC_SW_CPU_RESET != RESET_REASON_CPU0_SW");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTCWDT_CPU_RESET == RESET_REASON_CPU0_RTC_WDT, "RTCWDT_CPU_RESET != RESET_REASON_CPU0_RTC_WDT");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTCWDT_BROWN_OUT_RESET == RESET_REASON_SYS_BROWN_OUT, "RTCWDT_BROWN_OUT_RESET != RESET_REASON_SYS_BROWN_OUT");
ESP_STATIC_ASSERT((soc_reset_reason_t)RTCWDT_RTC_RESET == RESET_REASON_SYS_RTC_WDT, "RTCWDT_RTC_RESET != RESET_REASON_SYS_RTC_WDT");
ESP_STATIC_ASSERT((soc_reset_reason_t)TG1WDT_CPU_RESET == RESET_REASON_CPU0_MWDT1, "TG1WDT_CPU_RESET != RESET_REASON_CPU0_MWDT1");
ESP_STATIC_ASSERT((soc_reset_reason_t)SUPER_WDT_RESET == RESET_REASON_SYS_SUPER_WDT, "SUPER_WDT_RESET != RESET_REASON_SYS_SUPER_WDT");
ESP_STATIC_ASSERT((soc_reset_reason_t)GLITCH_RTC_RESET == RESET_REASON_SYS_CLK_GLITCH, "GLITCH_RTC_RESET != RESET_REASON_SYS_CLK_GLITCH");
ESP_STATIC_ASSERT((soc_reset_reason_t)EFUSE_RESET == RESET_REASON_CORE_EFUSE_CRC, "EFUSE_RESET != RESET_REASON_CORE_EFUSE_CRC");
ESP_STATIC_ASSERT((soc_reset_reason_t)USB_UART_CHIP_RESET == RESET_REASON_CORE_USB_UART, "USB_UART_CHIP_RESET != RESET_REASON_CORE_USB_UART");
ESP_STATIC_ASSERT((soc_reset_reason_t)USB_JTAG_CHIP_RESET == RESET_REASON_CORE_USB_JTAG, "USB_JTAG_CHIP_RESET != RESET_REASON_CORE_USB_JTAG");
ESP_STATIC_ASSERT((soc_reset_reason_t)POWER_GLITCH_RESET == RESET_REASON_CORE_PWR_GLITCH, "POWER_GLITCH_RESET != RESET_REASON_CORE_PWR_GLITCH");
typedef enum {
NO_SLEEP = 0,
EXT_EVENT0_TRIG = BIT0,
EXT_EVENT1_TRIG = BIT1,
GPIO_TRIG = BIT2,
TIMER_EXPIRE = BIT3,
SDIO_TRIG = BIT4,
MAC_TRIG = BIT5,
UART0_TRIG = BIT6,
UART1_TRIG = BIT7,
TOUCH_TRIG = BIT8,
SAR_TRIG = BIT9,
BT_TRIG = BIT10,
RISCV_TRIG = BIT11,
XTAL_DEAD_TRIG = BIT12,
RISCV_TRAP_TRIG = BIT13,
USB_TRIG = BIT14
} WAKEUP_REASON;
typedef enum {
DISEN_WAKEUP = NO_SLEEP,
EXT_EVENT0_TRIG_EN = EXT_EVENT0_TRIG,
EXT_EVENT1_TRIG_EN = EXT_EVENT1_TRIG,
GPIO_TRIG_EN = GPIO_TRIG,
TIMER_EXPIRE_EN = TIMER_EXPIRE,
SDIO_TRIG_EN = SDIO_TRIG,
MAC_TRIG_EN = MAC_TRIG,
UART0_TRIG_EN = UART0_TRIG,
UART1_TRIG_EN = UART1_TRIG,
TOUCH_TRIG_EN = TOUCH_TRIG,
SAR_TRIG_EN = SAR_TRIG,
BT_TRIG_EN = BT_TRIG,
RISCV_TRIG_EN = RISCV_TRIG,
XTAL_DEAD_TRIG_EN = XTAL_DEAD_TRIG,
RISCV_TRAP_TRIG_EN = RISCV_TRAP_TRIG,
USB_TRIG_EN = USB_TRIG
} WAKEUP_ENABLE;
/**
* @brief Get the reset reason for CPU.
*
* @param int cpu_no : CPU no.
*
* @return RESET_REASON
*/
RESET_REASON rtc_get_reset_reason(int cpu_no);
/**
* @brief Get the wakeup cause for CPU.
*
* @param int cpu_no : CPU no.
*
* @return WAKEUP_REASON
*/
WAKEUP_REASON rtc_get_wakeup_cause(void);
typedef void (* esp_rom_wake_func_t)(void);
/**
* @brief Read stored RTC wake function address
*
* Returns pointer to wake address if a value is set in RTC registers, and stored length & CRC all valid.
* valid means that both stored stub length and stored wake function address are four-byte aligned non-zero values
* and the crc check passes
*
* @param None
*
* @return esp_rom_wake_func_t : Returns pointer to wake address if a value is set in RTC registers
*/
esp_rom_wake_func_t esp_rom_get_rtc_wake_addr(void);
/**
* @brief Store new RTC wake function address
*
* Set a new RTC wake address function. If a non-NULL function pointer is set then the function
* memory is calculated and stored also.
*
* @param entry_addr Address of function. should be 4-bytes aligned otherwise it will not start from the stub after wake from deepsleep
* if NULL length will be ignored and all registers are cleared to 0.
*
* @param length length of function in RTC fast memory. should be less than RTC Fast memory size and aligned to 4-bytes.
* otherwise all registers are cleared to 0.
*
* @return None
*/
void esp_rom_set_rtc_wake_addr(esp_rom_wake_func_t entry_addr, size_t length);
/**
* @brief Suppress ROM log by setting specific RTC control register.
* @note This is not a permanent disable of ROM logging since the RTC register can not retain after chip reset.
*
* @param None
*
* @return None
*/
static inline void rtc_suppress_rom_log(void)
{
/* To disable logging in the ROM, only the least significant bit of the register is used,
* but since this register is also used to store the frequency of the main crystal (RTC_XTAL_FREQ_REG),
* you need to write to this register in the same format.
* Namely, the upper 16 bits and lower should be the same.
*/
REG_SET_BIT(RTC_CNTL_STORE4_REG, RTC_DISABLE_ROM_LOG);
}
/**
* @brief Software Reset digital core.
*
* It is not recommended to use this function in esp-idf, use
* esp_restart() instead.
*
* @param None
*
* @return None
*/
void software_reset(void);
/**
* @brief Software Reset digital core.
*
* It is not recommended to use this function in esp-idf, use
* esp_restart() instead.
*
* @param int cpu_no : The CPU to reset, 0 for PRO CPU, 1 for APP CPU.
*
* @return None
*/
void software_reset_cpu(int cpu_no);
/**
* @}
*/
#ifdef __cplusplus
}
#endif