esp-idf/docs/en/api-reference/system/random.rst

67 lines
4.3 KiB
ReStructuredText

Random Number Generation
========================
{IDF_TARGET_RF_NAME: default="Wi-Fi or Bluetooth", esp32s2="Wi-Fi"}
{IDF_TARGET_RF_IS: default="are", esp32s2="is"}
{IDF_TARGET_BOOTLOADER_RANDOM_INCOMPATIBLE: default="", esp32="I2S, "}
{IDF_TARGET_NAME} contains a hardware random number generator, values from it can be obtained using the APIs :cpp:func:`esp_random` and :cpp:func:`esp_fill_random`.
The hardware RNG produces true random numbers under any of the following conditions:
- RF subsystem is enabled (i.e., {IDF_TARGET_RF_NAME} {IDF_TARGET_RF_IS} enabled).
- An internal entropy source has been enabled by calling :cpp:func:`bootloader_random_enable` and not yet disabled by calling :cpp:func:`bootloader_random_disable`.
- While the ESP-IDF :ref:`second-stage-bootloader` is running. This is because the default ESP-IDF bootloader implementation calls :cpp:func:`bootloader_random_enable` when the bootloader starts, and :cpp:func:`bootloader_random_disable` before executing the app.
When any of these conditions are true, samples of physical noise are continuously mixed into the internal hardware RNG state to provide entropy. Consult the **{IDF_TARGET_NAME} Technical Reference Manual** > **Random Number Generator (RNG)** [`PDF <{IDF_TARGET_TRM_EN_URL}#rng>`__] chapter for more details.
If none of the above conditions are true, the output of the RNG should be considered pseudo-random only.
Startup
-------
During startup, ESP-IDF bootloader temporarily enables a non-RF entropy source (internal reference voltage noise) that provides entropy for any first boot key generation. However, after the app starts executing then normally only pseudo-random numbers are available until {IDF_TARGET_RF_NAME} {IDF_TARGET_RF_IS} initialized.
To re-enable the entropy source temporarily during app startup, or for an application that does not use {IDF_TARGET_RF_NAME}, call the function :cpp:func:`bootloader_random_enable` to re-enable the internal entropy source. The function :cpp:func:`bootloader_random_disable` must be called to disable the entropy source again before using ADC, {IDF_TARGET_BOOTLOADER_RANDOM_INCOMPATIBLE}{IDF_TARGET_RF_NAME}.
.. note::
The entropy source enabled during the boot process by the ESP-IDF Second Stage Bootloader seeds the internal RNG state with some entropy. However, the internal hardware RNG state is not large enough to provide a continuous stream of true random numbers. This is why a continuous entropy source must be enabled whenever true random numbers are required.
.. note::
If an application requires a source of true random numbers but it is not possible to permanently enable a hardware entropy source, consider using a strong software DRBG implementation such as the mbedTLS CTR-DRBG or HMAC-DRBG, with an initial seed of entropy from hardware RNG true random numbers.
.. only:: not esp32
Secondary Entropy
-----------------
{IDF_TARGET_NAME} RNG contains a secondary entropy source, based on sampling an asynchronous 8MHz internal oscillator (see the Technical Reference Manual for details). This entropy source is always enabled in ESP-IDF and continuously mixed into the RNG state by hardware. In testing, this secondary entropy source was sufficient to pass the `Dieharder`_ random number test suite without the main entropy source enabled (test input was created by concatenating short samples from a continuously resetting {IDF_TARGET_NAME}). However, it is currently only guaranteed that true random numbers are produced when the main entropy source is also enabled as described above.
API Reference
-------------
.. include-build-file:: inc/esp_random.inc
.. include-build-file:: inc/bootloader_random.inc
Getrandom
---------
A compatible version of the Linux ``getrandom()`` function is also provided for ease of porting:
.. code-block:: c
#include <sys/random.h>
ssize_t getrandom(void *buf, size_t buflen, unsigned int flags);
This function is implemented by calling :cpp:func:`esp_fill_random` internally.
The ``flags`` argument is ignored, this function is always non-blocking but the strength of any random numbers is dependent on the same conditions described above.
Return value is -1 (with ``errno`` set to ``EFAULT``) if the ``buf`` argument is NULL, and equal to ``buflen`` otherwise.
.. _Dieharder: https://webhome.phy.duke.edu/~rgb/General/dieharder.php