esp-idf/components/tinyusb/port/common/src/usb_descriptors.c
Andrei Gramakov 9d059be165 usb: added a tinyusb component; ci; soc.
ci: ignore s2-only projects from the cmake-make test
soc: refactored the usb part
2020-03-09 07:55:06 +01:00

128 lines
3.8 KiB
C

// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include "usb_descriptors.h"
#define USB_TUSB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | _PID_MAP(MIDI, 3))
/**** TinyUSB default ****/
tusb_desc_device_t descriptor_tinyusb = {
.bLength = sizeof(descriptor_tinyusb),
.bDescriptorType = TUSB_DESC_DEVICE,
.bcdUSB = 0x0200,
#if CFG_TUD_CDC
// Use Interface Association Descriptor (IAD) for CDC
// As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
.bDeviceClass = TUSB_CLASS_MISC,
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
.bDeviceProtocol = MISC_PROTOCOL_IAD,
#else
.bDeviceClass = 0x00,
.bDeviceSubClass = 0x00,
.bDeviceProtocol = 0x00,
#endif
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
.idVendor = 0xCafe,
.idProduct = USB_TUSB_PID,
.bcdDevice = 0x0100,
.iManufacturer = 0x01,
.iProduct = 0x02,
.iSerialNumber = 0x03,
.bNumConfigurations = 0x01};
tusb_desc_strarray_device_t descriptor_str_tinyusb = {
// array of pointer to string descriptors
(char[]){0x09, 0x04}, // 0: is supported language is English (0x0409)
"TinyUSB", // 1: Manufacturer
"TinyUSB Device", // 2: Product
"123456", // 3: Serials, should use chip ID
"TinyUSB CDC", // 4: CDC Interface
"TinyUSB MSC", // 5: MSC Interface
"TinyUSB HID" // 6: HID
};
/* End of TinyUSB default */
/**** Kconfig driven Descriptor ****/
tusb_desc_device_t descriptor_kconfig = {
.bLength = sizeof(descriptor_kconfig),
.bDescriptorType = TUSB_DESC_DEVICE,
.bcdUSB = 0x0200,
#if CFG_TUD_CDC
// Use Interface Association Descriptor (IAD) for CDC
// As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
.bDeviceClass = TUSB_CLASS_MISC,
.bDeviceSubClass = MISC_SUBCLASS_COMMON,
.bDeviceProtocol = MISC_PROTOCOL_IAD,
#else
.bDeviceClass = 0x00,
.bDeviceSubClass = 0x00,
.bDeviceProtocol = 0x00,
#endif
.bMaxPacketSize0 = CFG_TUD_ENDOINT0_SIZE,
#if CONFIG_USB_DESC_USE_ESPRESSIF_VID
.idVendor = USB_ESPRESSIF_VID,
#else
.idVendor = CONFIG_USB_DESC_CUSTOM_VID,
#endif
#if CONFIG_USB_DESC_USE_DEFAULT_PID
.idProduct = USB_TUSB_PID,
#else
.idProduct = CONFIG_USB_DESC_CUSTOM_PID,
#endif
.bcdDevice = CONFIG_USB_DESC_BCDDEVICE,
.iManufacturer = 0x01,
.iProduct = 0x02,
.iSerialNumber = 0x03,
.bNumConfigurations = 0x01};
tusb_desc_strarray_device_t descriptor_str_kconfig = {
// array of pointer to string descriptors
(char[]){0x09, 0x04}, // 0: is supported language is English (0x0409)
CONFIG_USB_DESC_MANUFACTURER_STRING, // 1: Manufacturer
CONFIG_USB_DESC_PRODUCT_STRING, // 2: Product
CONFIG_USB_DESC_SERIAL_STRING, // 3: Serials, should use chip ID
#if CONFIG_USB_CDC_ENABLED
CONFIG_USB_DESC_CDC_STRING, // 4: CDC Interface
#else
"",
#endif
#if CONFIG_USB_MSC_ENABLED
CONFIG_USB_DESC_MSC_STRING, // 5: MSC Interface
#else
"",
#endif
#if CONFIG_USB_HID_ENABLED
CONFIG_USB_DESC_HID_STRING // 6: HIDs
#else
"",
#endif
};
/* End of Kconfig driven Descriptor */