mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
399d2d2605
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... . Cleaned up header files from unnecessary headers (releated to soc/... headers).
358 lines
13 KiB
C
358 lines
13 KiB
C
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include "esp_slave.h"
|
|
#include "esp_log.h"
|
|
#include "freertos/task.h"
|
|
#include "soc/sdio_slave_periph.h"
|
|
|
|
static const char TAG[] = "esp_slave";
|
|
|
|
#define ESP_SLAVE_CMD53_END_ADDR 0x1f800
|
|
|
|
#define TX_BUFFER_MAX 0x1000
|
|
#define TX_BUFFER_MASK 0xFFF
|
|
#define RX_BYTE_MAX 0x100000
|
|
#define RX_BYTE_MASK 0xFFFFF
|
|
|
|
#define FUNC1_EN_MASK (BIT(1))
|
|
|
|
esp_err_t esp_slave_init_io(esp_slave_context_t *context)
|
|
{
|
|
esp_err_t err;
|
|
uint8_t ioe;
|
|
sdmmc_card_t* card = context->card;
|
|
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_FN_ENABLE, &ioe);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "IOE: 0x%02x", ioe);
|
|
|
|
uint8_t ior = 0;
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_FN_READY, &ior);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "IOR: 0x%02x", ior);
|
|
|
|
// enable function 1
|
|
ioe |= FUNC1_EN_MASK;
|
|
err = sdmmc_io_write_byte(card, 0, SD_IO_CCCR_FN_ENABLE, ioe, &ioe);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "IOE: 0x%02x", ioe);
|
|
|
|
// wait for the card to become ready
|
|
while ((ior & FUNC1_EN_MASK) == 0) {
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_FN_READY, &ior);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "IOR: 0x%02x", ior);
|
|
}
|
|
|
|
// get interrupt status
|
|
uint8_t ie;
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_INT_ENABLE, &ie);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG,"IE: 0x%02x", ie);
|
|
|
|
// enable interrupts for function 1&2 and master enable
|
|
ie |= BIT(0) | FUNC1_EN_MASK;
|
|
err = sdmmc_io_write_byte(card, 0, SD_IO_CCCR_INT_ENABLE, ie, &ie);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "IE: 0x%02x", ie);
|
|
|
|
// get bus width register
|
|
uint8_t bus_width;
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_BUS_WIDTH, &bus_width);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG,"BUS_WIDTH: 0x%02x", bus_width);
|
|
|
|
// enable continuous SPI interrupts
|
|
bus_width |= CCCR_BUS_WIDTH_ECSI;
|
|
err = sdmmc_io_write_byte(card, 0, SD_IO_CCCR_BUS_WIDTH, bus_width, &bus_width);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGD(TAG, "BUS_WIDTH: 0x%02x", bus_width);
|
|
|
|
uint16_t bs = 512;
|
|
const uint8_t* bs_u8 = (const uint8_t*) &bs;
|
|
uint16_t bs_read = 0;
|
|
uint8_t* bs_read_u8 = (uint8_t*) &bs_read;
|
|
// Set block sizes for functions 0 to 512 bytes
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, SD_IO_CCCR_BLKSIZEL, &bs_read_u8[0]));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, SD_IO_CCCR_BLKSIZEH, &bs_read_u8[1]));
|
|
ESP_LOGI(TAG, "Function 0 BS: %04x", (int) bs_read);
|
|
|
|
ESP_ERROR_CHECK(sdmmc_io_write_byte(card, 0, SD_IO_CCCR_BLKSIZEL, bs_u8[0], NULL));
|
|
ESP_ERROR_CHECK(sdmmc_io_write_byte(card, 0, SD_IO_CCCR_BLKSIZEH, bs_u8[1], NULL));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, SD_IO_CCCR_BLKSIZEL, &bs_read_u8[0]));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, SD_IO_CCCR_BLKSIZEH, &bs_read_u8[1]));
|
|
ESP_LOGI(TAG, "Function 0 BS: %04x", (int) bs_read);
|
|
|
|
// Set block sizes for functions 1 to given value (default value = 512).
|
|
if (context->block_size > 0 || context->block_size <= 2048) {
|
|
bs = context->block_size;
|
|
} else {
|
|
bs = 512;
|
|
}
|
|
size_t offset = SD_IO_FBR_START * 1;
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEL, &bs_read_u8[0]));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEH, &bs_read_u8[1]));
|
|
ESP_LOGI(TAG, "Function 1 BS: %04x", (int) bs_read);
|
|
|
|
ESP_ERROR_CHECK(sdmmc_io_write_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEL, bs_u8[0], NULL));
|
|
ESP_ERROR_CHECK(sdmmc_io_write_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEH, bs_u8[1], NULL));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEL, &bs_read_u8[0]));
|
|
ESP_ERROR_CHECK(sdmmc_io_read_byte(card, 0, offset + SD_IO_CCCR_BLKSIZEH, &bs_read_u8[1]));
|
|
ESP_LOGI(TAG, "Function 1 BS: %04x", (int) bs_read);
|
|
|
|
if (bs_read != context->block_size) {
|
|
ESP_LOGW(TAG, "Function1 block size %d different than set value %d", bs_read, context->block_size);
|
|
context->block_size = bs_read;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t esp_slave_wait_for_ioready(esp_slave_context_t *context)
|
|
{
|
|
ESP_LOGV(TAG, "wait_for_ioready");
|
|
esp_err_t err;
|
|
sdmmc_card_t *card = context->card;
|
|
// wait for the card to become ready
|
|
uint8_t ior = 0;
|
|
while ((ior & FUNC1_EN_MASK) == 0) {
|
|
err = sdmmc_io_read_byte(card, 0, SD_IO_CCCR_FN_READY, &ior);
|
|
if (err != ESP_OK) return err;
|
|
ESP_LOGI(TAG, "IOR: 0x%02x", ior);
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static inline esp_err_t esp_slave_write_byte(esp_slave_context_t *context, uint32_t addr, uint8_t val, uint8_t *val_o)
|
|
{
|
|
return sdmmc_io_write_byte(context->card, 1, addr&0x3FF, val, val_o);
|
|
}
|
|
|
|
static inline esp_err_t esp_slave_write_bytes(esp_slave_context_t *context, uint32_t addr, uint8_t *val, int len)
|
|
{
|
|
return sdmmc_io_write_bytes(context->card, 1, addr&0x3FF, val, len);
|
|
}
|
|
|
|
static inline esp_err_t esp_slave_read_byte(esp_slave_context_t *context, uint32_t addr, uint8_t *val_o)
|
|
{
|
|
return sdmmc_io_read_byte(context->card, 1, addr&0x3FF, val_o);
|
|
}
|
|
|
|
static inline esp_err_t esp_slave_read_bytes(esp_slave_context_t *context, uint32_t addr, uint8_t *val_o, int len)
|
|
{
|
|
return sdmmc_io_read_bytes(context->card, 1, addr&0x3FF, val_o, len);
|
|
}
|
|
|
|
esp_err_t esp_slave_send_packet(esp_slave_context_t *context, const void* start, size_t length, uint32_t wait_ms)
|
|
{
|
|
sdmmc_card_t *card = context->card;
|
|
uint16_t buffer_size = context->buffer_size;
|
|
int buffer_used = (length + buffer_size - 1)/buffer_size;
|
|
esp_err_t err;
|
|
const uint32_t wait_ticks = wait_ms/portTICK_PERIOD_MS;
|
|
uint32_t pre = xTaskGetTickCount();
|
|
|
|
assert(length>0);
|
|
for(;;) {
|
|
uint32_t num = 0;
|
|
err = esp_slave_get_tx_buffer_num(context, &num);
|
|
if (err == ESP_OK && num * buffer_size >= length) break;
|
|
if (err != ESP_OK && err != ESP_ERR_TIMEOUT) return err;
|
|
//not error and buffer not enough, retry ``timeout_cnt`` times
|
|
uint32_t now = xTaskGetTickCount();
|
|
if (now-pre >= wait_ticks) {
|
|
ESP_LOGD(TAG, "buffer is not enough: %d, %d required.", num, buffer_used);
|
|
return ESP_ERR_TIMEOUT;
|
|
} else {
|
|
ESP_LOGV(TAG, "buffer is not enough: %d, %d required. Retry...", num, buffer_used);
|
|
}
|
|
vTaskDelay(1);
|
|
}
|
|
|
|
ESP_LOGV(TAG, "send_packet: len: %d", length);
|
|
uint8_t *start_ptr = (uint8_t*)start;
|
|
uint32_t len_remain = length;
|
|
do {
|
|
const int block_size = 512;
|
|
/* Though the driver supports to split packet of unaligned size into
|
|
* length of 4x and 1~3, we still send aligned size of data to get
|
|
* higher effeciency. The length is determined by the SDIO address, and
|
|
* the remainning will be discard by the slave hardware.
|
|
*/
|
|
int block_n = len_remain/block_size;
|
|
int len_to_send;
|
|
if (block_n) {
|
|
len_to_send = block_n * block_size;
|
|
err = sdmmc_io_write_blocks(card, 1, ESP_SLAVE_CMD53_END_ADDR - len_remain, start_ptr, len_to_send);
|
|
} else {
|
|
len_to_send = len_remain;
|
|
err = sdmmc_io_write_bytes(card, 1, ESP_SLAVE_CMD53_END_ADDR - len_remain, start_ptr, (len_to_send + 3) & (~3));
|
|
}
|
|
if (err != ESP_OK) return err;
|
|
start_ptr += len_to_send;
|
|
len_remain -= len_to_send;
|
|
} while (len_remain);
|
|
|
|
context->tx_sent_buffers += buffer_used;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t esp_slave_get_packet(esp_slave_context_t *context, void* out_data, size_t size, size_t *out_length, uint32_t wait_ms)
|
|
{
|
|
sdmmc_card_t *card = context->card;
|
|
esp_err_t err;
|
|
esp_err_t ret = ESP_OK;
|
|
uint32_t len;
|
|
const uint32_t wait_ticks = wait_ms/portTICK_PERIOD_MS;
|
|
uint32_t pre = xTaskGetTickCount();
|
|
|
|
assert (size>0);
|
|
for (;;) {
|
|
err = esp_slave_get_rx_data_size(context, &len);
|
|
if (err == ESP_OK && len > 0) break;
|
|
if (err != ESP_OK && err != ESP_ERR_TIMEOUT) return err;
|
|
//not error and no data, retry ``timeout_cnt`` times.
|
|
uint32_t now = xTaskGetTickCount();
|
|
if (now-pre >= wait_ticks) return ESP_ERR_NOT_FOUND;
|
|
vTaskDelay(1);
|
|
}
|
|
|
|
ESP_LOGV(TAG, "get_packet: slave len=%d, max read size=%d", len, size);
|
|
if (len > size) {
|
|
len = size;
|
|
ret = ESP_ERR_NOT_FINISHED;
|
|
}
|
|
|
|
uint8_t *start = out_data;
|
|
uint32_t len_remain = len;
|
|
do {
|
|
const int block_size = 512; //currently our driver don't support block size other than 512
|
|
int len_to_send;
|
|
|
|
int block_n = len_remain/block_size;
|
|
if (block_n != 0) {
|
|
len_to_send = block_n * block_size;
|
|
err = sdmmc_io_read_blocks(card, 1, ESP_SLAVE_CMD53_END_ADDR - len_remain, start, len_to_send);
|
|
} else {
|
|
len_to_send = len_remain;
|
|
/* though the driver supports to split packet of unaligned size into length
|
|
* of 4x and 1~3, we still get aligned size of data to get higher
|
|
* effeciency. The length is determined by the SDIO address, and the
|
|
* remainning will be ignored by the slave hardware.
|
|
*/
|
|
err = sdmmc_io_read_bytes(card, 1, ESP_SLAVE_CMD53_END_ADDR - len_remain, start, (len_to_send + 3) & (~3));
|
|
}
|
|
if (err != ESP_OK) return err;
|
|
start += len_to_send;
|
|
len_remain -= len_to_send;
|
|
} while(len_remain!=0);
|
|
|
|
context->rx_got_bytes += len;
|
|
*out_length = len;
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t esp_slave_get_tx_buffer_num(esp_slave_context_t *context, uint32_t* tx_num)
|
|
{
|
|
uint32_t len;
|
|
esp_err_t err;
|
|
|
|
ESP_LOGV(TAG, "get_tx_buffer_num");
|
|
err = esp_slave_read_bytes(context, HOST_SLC0HOST_TOKEN_RDATA_REG, (uint8_t*)&len, 4);
|
|
if (err != ESP_OK) return err;
|
|
len = (len>>16)&TX_BUFFER_MASK;
|
|
len = (len + TX_BUFFER_MAX - context->tx_sent_buffers)%TX_BUFFER_MAX;
|
|
*tx_num = len;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t esp_slave_get_rx_data_size(esp_slave_context_t *context, uint32_t* rx_size)
|
|
{
|
|
uint32_t len;
|
|
esp_err_t err;
|
|
|
|
ESP_LOGV(TAG, "get_rx_data_size: got_bytes: %d", context->rx_got_bytes);
|
|
err = esp_slave_read_bytes(context, HOST_SLCHOST_PKT_LEN_REG, (uint8_t*)&len, 4);
|
|
if (err != ESP_OK) return err;
|
|
len &= RX_BYTE_MASK;
|
|
len = (len + RX_BYTE_MAX - context->rx_got_bytes)%RX_BYTE_MAX;
|
|
*rx_size = len;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t esp_slave_clear_intr(esp_slave_context_t *context, uint32_t intr_mask)
|
|
{
|
|
ESP_LOGV(TAG, "clear_intr: %08X", intr_mask);
|
|
return esp_slave_write_bytes(context, HOST_SLC0HOST_INT_CLR_REG, (uint8_t*)&intr_mask, 4);
|
|
}
|
|
|
|
esp_err_t esp_slave_get_intr(esp_slave_context_t *context, uint32_t *intr_raw, uint32_t *intr_st)
|
|
{
|
|
esp_err_t r;
|
|
ESP_LOGV(TAG, "get_intr");
|
|
if (intr_raw == NULL && intr_st == NULL) return ESP_ERR_INVALID_ARG;
|
|
|
|
if (intr_raw != NULL) {
|
|
r= esp_slave_read_bytes(context, HOST_SLC0HOST_INT_RAW_REG, (uint8_t*)intr_raw, 4);
|
|
if (r != ESP_OK) return r;
|
|
}
|
|
if (intr_st != NULL) {
|
|
r = esp_slave_read_bytes(context, HOST_SLC0HOST_INT_ST_REG, (uint8_t*)intr_st, 4);
|
|
if (r != ESP_OK) return r;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t esp_slave_set_intr_ena(esp_slave_context_t *context, uint32_t ena_mask)
|
|
{
|
|
ESP_LOGV(TAG, "set_intr_ena: %08X", ena_mask);
|
|
return esp_slave_write_bytes(context, HOST_SLC0HOST_INT_ENA_REG, (uint8_t*)&ena_mask, 4);
|
|
}
|
|
|
|
esp_err_t esp_slave_get_intr_ena(esp_slave_context_t *context, uint32_t *ena_mask_o)
|
|
{
|
|
ESP_LOGV(TAG, "get_intr_ena");
|
|
esp_err_t ret = esp_slave_read_bytes(context, HOST_SLC0HOST_INT_ENA_REG, (uint8_t*)ena_mask_o, 4);
|
|
ESP_LOGV(TAG, "ena: %08X", *ena_mask_o);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t esp_slave_write_reg(esp_slave_context_t *context, uint8_t addr, uint8_t value, uint8_t* value_o)
|
|
{
|
|
ESP_LOGV(TAG, "write_reg: %08X", value);
|
|
// addrress over range
|
|
if (addr >= 64) return ESP_ERR_INVALID_ARG;
|
|
// reserved for interrupts
|
|
if (addr >= 28 && addr <= 31) return ESP_ERR_INVALID_ARG;
|
|
return esp_slave_write_byte(context, HOST_SLCHOST_CONF_W_REG(addr), value, value_o);
|
|
}
|
|
|
|
esp_err_t esp_slave_read_reg(esp_slave_context_t *context, uint8_t add, uint8_t *value_o)
|
|
{
|
|
ESP_LOGV(TAG, "read_reg");
|
|
// address over range
|
|
if (add >= 64) return ESP_ERR_INVALID_ARG;
|
|
esp_err_t ret = esp_slave_read_byte(context, HOST_SLCHOST_CONF_W_REG(add), value_o);
|
|
ESP_LOGV(TAG, "reg: %08X", *value_o);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t esp_slave_send_slave_intr(esp_slave_context_t *context, uint8_t intr_mask)
|
|
{
|
|
ESP_LOGV(TAG, "send_slave_intr: %02x", intr_mask);
|
|
return esp_slave_write_byte(context, HOST_SLCHOST_CONF_W7_REG+0, intr_mask, NULL);
|
|
}
|
|
|
|
|