esp-idf/components/idf_test/integration_test/INIT_COND_SSC.yml
2019-04-19 16:44:00 +08:00

2185 lines
65 KiB
YAML

.SSC_INIT_COND: &SSC_INIT_COND
test script: InitCondBase
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSEALL
- - SSC SSC1 ram
- - 'R SSC1 C +FREEHEAP:'
.dut1_start_wifi: &dut1_start_wifi
LIST_MERGE:
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE
initial condition:
- tag: APM1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to SoftAP mode and config SoftAP, enable DHCP server
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- tag: APM2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to SoftAP mode, PC Wi-Fi NIC connected with SoftAP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 ap -L
- - R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- tag: APO1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to SoftAP mode and config SoftAP, enable DHCP server
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- tag: APO2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to SoftAP mode, PC Wi-Fi NIC connected with SoftAP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 ap -L
- - R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- tag: APSTA1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA+SoftAP mode, config SoftAP and enable DHCP server
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- tag: APSTA2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA+SoftAP mode, PC Wi-Fi NIC connected with SoftAP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC1 ap -Q
- - R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)
- - SSC SSC1 ap -L
- - R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- tag: APWIFISTO
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to SoftAP mode, stop Wi-Fi
check cmd set:
- ''
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a init
- - R SSC1 c +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- tag: BLE_CONN2
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE one 2 DUTs, GATT service 0xA000 started on DUT2, DUT1 connected with DUT2
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA0
- - R SSC2 C +GATTS:StartService,OK,A000
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA0
- - R SSC2 C +GATTS:StartService,OK,A000
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN3
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 2 DUTs, GATT service 0xA002 started on DUT2, DUT1 connected with DUT2
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA2
- - R SSC2 C +GATTS:StartService,OK,A002
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA2
- - R SSC2 C +GATTS:StartService,OK,A002
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN4
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE and create both GATTC and GATTS app on DUT1 and DUT2. DUT1 connected with DUT2. use GATT service A002.
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC[1-2] gatts -S -z load -p 0xA2
- - R SSC[1-2] C +GATTS:StartService,OK,A002
- - SSC SSC[1-2] gattc -F -r <dut[2,1]_bt_mac>
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
- - SSC SSC2 bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC2 C +BLE:GattcOpen,OK
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC[1-2] gatts -S -z load -p 0xA2
- - R SSC[1-2] C +GATTS:StartService,OK,A002
- - SSC SSC[1-2] gattc -F -r <dut[2,1]_bt_mac>
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - R SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
- - SSC SSC2 bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC2 C +BLE:GattcOpen,OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN5
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 5 DUTs, DUT1 connected with DUT2-5 as master, DUT2-5 use GATT service 0xA002
check cmd set:
- ''
- - ASSERT
- - ''
force restore cmd set:
- ''
- - SSC SSC[1-5] reboot
- - R SSC[1-5] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[2-5] bleadv -D -z start
- - P SSC[2-5] C +BLEADV:Start,OK
- - SSC SSC[2-5] gatts -S -z load -p 0xA2
- - P SSC[2-5] C +GATTS:StartService,OK,A002
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - LOOP 4 1 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
- ''
- - SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>
- - R SSC1 RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut{%d}_bt_mac>)
- P SSC{%d} C +BLE:GattsConnect
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] bt -D -z init
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] bt -D -z enable
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[2-5] bleadv -D -z start
- - P SSC[2-5] C +BLEADV:Start,OK
- - SSC SSC[2-5] gatts -S -z load -p 0xA2
- - P SSC[2-5] C +GATTS:StartService,OK,A002
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - LOOP 4 1 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
- ''
- - SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>
- - R SSC1 RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut{%d}_bt_mac>)
- P SSC{%d} C +BLE:GattsConnect
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN6
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 5 DUTs, DUT1 is slave, connected by DUT2-5, DUT1 use GATT service 0xA002
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] bt -D -z init
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] bt -D -z enable
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC1 gatts -S -z load -p 0xA2
- - R SSC1 C +GATTS:StartService,OK,A002
- - LOOP 4 3 "[2,3,4,5]" "[2,3,4,5]"
- ''
- - SSC SSC1 bleadv -D -z start
- - P SSC1 C +BLEADV:Start,OK
- - SSC SSC[2-5] gattc -F -r <dut1_bt_mac>
- - R SSC[2-5] C +GATTC:OK
- - SSC SSC{%d} bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC{%d} RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut1_bt_mac>)
- P SSC1 C +BLE:GattsConnect
force restore cmd set:
- ''
- - SSC SSC[1-5] reboot
- - R SSC[1-5] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC1 gatts -S -z load -p 0xA2
- - R SSC1 C +GATTS:StartService,OK,A002
- - SSC SSC[2-5] gattc -F -r <dut1_bt_mac>
- - R SSC[2-5] C +GATTC:OK
- - LOOP 4 2 "[2,3,4,5]" "[2,3,4,5]"
- ''
- - SSC SSC1 bleadv -D -z start
- - P SSC1 C +BLEADV:Start,OK
- - SSC SSC{%d} bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC{%d} RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut1_bt_mac>)
- P SSC1 C +BLE:GattsConnect
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN7
<<: *SSC_INIT_COND
initial condition detail: (SSC) BLE is enable on 5 DUTs, DUT1 connected with DUT2-3 as master, connected with DUT4-5 as slave, use service 0xA002 on GATTS
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] bt -D -z init
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] bt -D -z enable
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[1-3] gatts -S -z load -p 0xA2
- - R SSC[1-3] C +GATTS:StartService,OK,A002
- - LOOP 2 2 "[4,5]" "[4,5]"
- ''
- - SSC SSC1 bleadv -D -z start
- - P SSC1 C +BLEADV:Start,OK
- - SSC SSC{%d} bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC{%d} RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut1_bt_mac>)
- P SSC1 C +BLE:GattsConnect
- - SSC SSC[2-3] bleadv -D -z start
- - P SSC[2-3] C +BLEADV:Start,OK
- - LOOP 2 1 "[2,3]" "[2,3]" "[2,3]"
- ''
- - SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>
- - R SSC1 RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut{%d}_bt_mac>)
- P SSC{%d} C +BLE:GattsConnect
force restore cmd set:
- ''
- - SSC SSC[1-5] reboot
- - R SSC[1-5] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[1-3] gatts -S -z load -p 0xA2
- - R SSC[1-3] C +GATTS:StartService,OK,A002
- - LOOP 2 2 "[4,5]" "[4,5]"
- ''
- - SSC SSC1 bleadv -D -z start
- - P SSC1 C +BLEADV:Start,OK
- - SSC SSC{%d} bleconn -C -p 0x10 -a <dut1_bt_mac>
- - R SSC{%d} RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut1_bt_mac>)
- P SSC1 C +BLE:GattsConnect
- - SSC SSC[2-3] bleadv -D -z start
- - P SSC[2-3] C +BLEADV:Start,OK
- - LOOP 2 1 "[2,3]" "[2,3]" "[2,3]"
- ''
- - SSC SSC1 bleconn -C -p 0x10 -a <dut{%d}_bt_mac>
- - R SSC1 RE "\+BLE:GattcConnect,OK,0010,%%s"%%(<dut{%d}_bt_mac>)
- P SSC{%d} C +BLE:GattsConnect
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_CONN_SMP
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 2 DUTs, DUT1 connected and paired with DUT2, DUT2 created GATT service 0xA000
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA0
- - R SSC2 C +GATTS:StartService,OK,A000
- - SSC SSC2 blesmp -S -z AuthReqMode -v 0x01
- - P SSC2 C +BLESMP:OK
- - SSC SSC2 blesmp -S -z IOCAP -v 0x03
- - P SSC2 C +BLESMP:OK
- - SSC SSC2 blesmp -S -z RspKey -v 0x03
- - P SSC2 C +BLESMP:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - P SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
- - SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc
- - P SSC1 C +BLESMP:SecReq
- - SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>
- - P SSC[1-2] C +BLESMP:AuthComplete,Success,0
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC2 gatts -S -z load -p 0xA0
- - R SSC2 C +GATTS:StartService,OK,A000
- - SSC SSC2 blesmp -S -z AuthReqMode -v 0x01
- - P SSC2 C +BLESMP:OK
- - SSC SSC2 blesmp -S -z IOCAP -v 0x03
- - P SSC2 C +BLESMP:OK
- - SSC SSC2 blesmp -S -z RspKey -v 0x03
- - P SSC2 C +BLESMP:OK
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- - P SSC1 C +BLE:GattcConnect,OK
- P SSC2 C +BLE:GattsConnect
- - SSC SSC2 blesmp -E -r <dut1_bt_mac> -z Enc
- - P SSC1 C +BLESMP:SecReq
- - SSC SSC1 blesmp -R -a 1 -r <dut2_bt_mac>
- - P SSC[1-2] C +BLESMP:AuthComplete,Success,0
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_DEINIT1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT deinit BT host
check cmd set:
- ''
- - SSC SSC1 bt -Q
- - R SSC1 C +BT:status,DEINIT
restore cmd set:
- ''
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -Q
- - R SSC1 C +BT:status,DEINIT
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 bt -D -z stop
- - R SSC1 C +BT:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BTC_DEINIT1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT deinit BT controller
check cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - "SSC SSC1 btc -D -z disable"
- ["R SSC1 C +BTC:OK"]
- - "SSC SSC1 btc -D -z deinit"
- ["R SSC1 C +BTC:OK"]
- - SSC SSC1 btc -Q
- - R SSC1 C +BTC:status,IDLE
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -Q
- - R SSC1 C +BT:status,DEINIT
restore cmd set:
- ''
- - "SSC SSC1 btc -D -z disable"
- ["R SSC1 C +BTC:OK"]
- - "SSC SSC1 btc -D -z deinit"
- ["R SSC1 C +BTC:OK"]
- - SSC SSC1 btc -Q
- - R SSC1 C +BTC:status,IDLE
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -Q
- - R SSC1 C +BT:status,DEINIT
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 btc -D -z stop
- - R SSC1 C +BTC:OK
- - SSC SSC1 bt -D -z stop
- - R SSC1 C +BT:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT1
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on DUT
check cmd set:
- ''
- - SSC SSC1 bt -Q
- - R SSC1 C +BT:status,ENABLE
- - SSC SSC1 ble -R
- - 'R SSC1 C +BLE:'
- - SSC SSC1 bleconn -Q
- - R SSC1 C +BLECONN:ConnCount,0
restore cmd set:
- ''
- - SSC SSC1 bt -D -z init
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z enable
- - 'R SSC1 C +BT:'
- - SSC SSC1 ble -R
- - 'R SSC1 C +BLE:'
- - SSC SSC1 bleconn -D -z all
- - 'R SSC1 C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 bt -D -z init
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z enable
- - 'R SSC1 C +BT:'
- - SSC SSC1 ble -R
- - 'R SSC1 C +BLE:'
restore post cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC1 sta -D
- []
- - SSC SSC1 bleconn -D -z all
- - 'R SSC1 C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC1 gatts -S -z delete
- - 'R SSC1 C +GATTS:'
- - SSC SSC1 gattc -U -z all
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT2
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 2 DUTs, no active connection, DUT2 load service 0xA0 and start adv
check cmd set:
- ''
- - SSC SSC[1-2] bt -Q
- - R SSC[1-2] C +BT:status,ENABLE
restore cmd set:
- ''
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
restore post cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC2 gatts -S -z load -p 0xA0
- - R SSC2 C +GATTS:StartService,OK,A000
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT3
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 2 DUTs, no active connection, DUT2 load service 0xA002 and start adv
check cmd set:
- ''
- - SSC SSC[1-2] bt -Q
- - R SSC[1-2] C +BT:status,ENABLE
restore cmd set:
- ''
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
restore post cmd set:
- ''
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC2 gatts -S -z load -p 0xA2
- - R SSC2 C +GATTS:StartService,OK,A002
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT5
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 5 DUTs, no active connection
check cmd set:
- ''
- - SSC SSC[1-5] bt -Q
- - R SSC[1-5] C +BT:status,ENABLE
restore cmd set:
- ''
- - SSC SSC[1-5] bt -D -z init
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] bt -D -z enable
- - 'R SSC[1-5] C +BT:'
force restore cmd set:
- ''
- - SSC SSC[1-5] reboot
- - R SSC[1-5] C !!!ready!!!
- - SSC SSC[1-5] bt -D -z init
- - 'R SSC[1-5] C +BT:'
- - SSC SSC[1-5] bt -D -z enable
- - 'R SSC[1-5] C +BT:'
restore post cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - "SSC SSC[2-5] gatts -S -z load -p 0xA0"
- ["P SSC[2-5] C +GATTS:StartService,OK,A000"]
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT_SMP
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 2 DUTs, no active connection, create GATT service 0xA002 on DUT2, DUT2 start adv, DUT1 load default initiator param, DUT2 load default responder param
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
- - ASSERT
- - ''
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 gatts -S -z load -p 0xA2
- - R SSC2 C +GATTS:StartService,OK,A002
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC[1-2] blesmp -L -c [1,0]
- - R SSC[1-2] C +BLESMP:OK
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
restore post cmd set:
- ''
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-2] sta -D
- []
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC2 gatts -S -z load -p 0xA2
- - R SSC2 C +GATTS:StartService,OK,A002
- - SSC SSC2 bleadv -L -c 0 -t 3
- - R SSC2 C +BLEADV:SetAdv,OK
- - SSC SSC2 bleadv -D -z start
- - R SSC2 C +BLEADV:OK
- - SSC SSC[1-2] blesmp -L -c [1,0]
- - R SSC[1-2] C +BLESMP:OK
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: BLE_INIT_SMP5
<<: *SSC_INIT_COND
initial condition detail: (SSC) enable BLE on 5 DUTs, no active connection, create GATT service 0xA000 on DUT2-5, DUT2-5 start adv, DUT1 load default initiator param, DUT2-5 load default responder param
check cmd set:
- ''
- - ASSERT
- - ''
restore cmd set:
- ''
- - ASSERT
- - ''
force restore cmd set:
- ''
- - SSC SSC[1-5] reboot
- - R SSC[1-5] C !!!ready!!!
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[2-5] gatts -S -z load -p 0xA0
- - R SSC[2-5] C +GATTS:StartService,OK,A000
- - SSC SSC[2-5] bleadv -L -c 0 -t 3
- - R SSC[2-5] C +BLEADV:SetAdv,OK
- - SSC SSC[2-5] bleadv -D -z start
- - R SSC[2-5] C +BLEADV:OK
- - SSC SSC[1-5] blesmp -L -c [1,0]
- - R SSC[1-5] C +BLESMP:OK
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
restore post cmd set:
- ''
- - SSC SSC[1-5] ble -R
- - 'R SSC[1-5] C +BLE:'
- - SSC SSC[1-5] bleconn -D -z all
- - 'R SSC[1-5] C +BLECONN:'
- - SSC SSC[1-5] blesmp -B -z clear
- - R SSC[1-5] C +BLESMP:ClearBond,Success
- - SSC SSC[1-5] gatts -S -z delete
- - 'R SSC[1-5] C +GATTS:'
- - SSC SSC[1-5] gattc -U -z all
- - R SSC[1-5] C +GATTC:OK
- - SSC SSC[1-5] bleadv -D -z stop
- - R SSC[1-5] C +BLEADV:OK
- - SSC SSC[1-5] ble -S -z public
- - R SSC[1-5] C +BLE:OK
- - SSC SSC[2-5] gatts -S -z load -p 0xA0
- - R SSC[2-5] C +GATTS:StartService,OK,A000
- - SSC SSC[2-5] bleadv -L -c 0 -t 3
- - R SSC[2-5] C +BLEADV:SetAdv,OK
- - SSC SSC[2-5] bleadv -D -z start
- - R SSC[2-5] C +BLEADV:OK
- - SSC SSC1 blesmp -L -c 1
- - R SSC1 C +BLESMP:OK
- - SSC SSC[2-5] blesmp -L -c 0
- - R SSC[2-5] C +BLESMP:OK
# do wifi disconnect, to prevent wifi reconnect cause bad BLE performance
- - SSC SSC[1-5] sta -D
- []
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- - R SSC1 C +GATTC:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: NOW1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 in AP mode and espnow is de-initialized
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
- - SSC SSC1 espnow -D
- - 'R SSC1 C +ESPNOW:'
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -m <target_ap_mac> -o 2
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 espnow -D
- - 'R SSC1 C +ESPNOW:'
force restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] reboot
- - R SSC[1-<dev_num>] C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mac -S -m <target_ap_mac> -o 2
- - R SSC1 C +MAC:AP,OK
- - SSC SSC1 espnow -D
- - 'R SSC1 C +ESPNOW:'
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: NOW2
<<: *SSC_INIT_COND
initial condition detail: (SSC) multiple (<dev_num>) DUTs in AP mode, espnow is initialized
with self role slave
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC[1-<dev_num>] op -Q
- - R SSC[1-<dev_num>] C +CURMODE:2
- - SSC SSC[1-<dev_num>] mac -Q -o 3
- - R SSC[1-<dev_num>] P <target[1-<dev_num>]_ap_mac> P <target[1-<dev_num>]_mac>
- - SSC SSC[1-<dev_num>] espnow -D
- - 'R SSC[1-<dev_num>] C +ESPNOW:'
- - SSC SSC[1-<dev_num>] espnow -I
- - R SSC[1-<dev_num>] C +ESPNOW:OK
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- - R SSC[1-<dev_num>] C +ESPNOW:OK
restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] op -S -o 3
- - R SSC[1-<dev_num>] C +MODE:OK
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_ap_mac> -o 2
- - R SSC[1-<dev_num>] C +MAC:AP,OK
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_mac> -o 1
- - R SSC[1-<dev_num>] C +MAC:STA,OK
- - SSC SSC[1-<dev_num>] op -S -o 2
- - R SSC[1-<dev_num>] C +MODE:OK
- - SSC SSC[1-<dev_num>] espnow -D
- - 'R SSC[1-<dev_num>] C +ESPNOW:'
- - SSC SSC[1-<dev_num>] espnow -I
- - R SSC[1-<dev_num>] C +ESPNOW:OK
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- - R SSC[1-<dev_num>] C +ESPNOW:OK
force restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] reboot
- - R SSC[1-<dev_num>] C !!!ready!!!
- - SSC SSC[1-<dev_num>] op -S -o 3
- - R SSC[1-<dev_num>] C +MODE:OK
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_ap_mac> -o 2
- - R SSC[1-<dev_num>] C +MAC:AP,OK
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_mac> -o 1
- - R SSC[1-<dev_num>] C +MAC:STA,OK
- - SSC SSC[1-<dev_num>] op -S -o 2
- - R SSC[1-<dev_num>] C +MODE:OK
- - SSC SSC[1-<dev_num>] espnow -D
- - 'R SSC[1-<dev_num>] C +ESPNOW:'
- - SSC SSC[1-<dev_num>] espnow -I
- - R SSC[1-<dev_num>] C +ESPNOW:OK
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- - R SSC[1-<dev_num>] C +ESPNOW:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: None
<<: *SSC_INIT_COND
initial condition detail: (SSC) do nothing
check cmd set:
- ''
- - DELAY 0.1
- - dummy
restore cmd set:
- ''
- - DELAY 0.1
- - dummy
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
restore post cmd set:
- ''
- - DELAY 0.1
- - dummy
- tag: PAIR1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 and simple is de-inited
check cmd set:
- ''
- - SSC SSC1 sp -D
- - R SSC1 C +SP:OK
restore cmd set:
- ''
- - SSC SSC1 sp -D
- - R SSC1 C +SP:OK
force restore cmd set:
- ''
- - SSC SSC1 sp -D
- - R SSC1 C +SP:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: PAIR2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 in SoftAP mode, DUT2 in STA mode, two DUTs deinit simple pair
and init simple pair
check cmd set:
- ''
- - SSC SSC[1,2] op -Q
- - R SSC[1,2] C +MODE:[2,1]
- - SSC SSC[1,2] mac -Q -o 3
- - R SSC[1,2] P <target[1,2]_ap_mac> P <target[1,2]_mac>
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
restore cmd set:
- ''
- - SSC SSC[1,2] op -S -o 3
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- - R SSC[1,2] C +MAC:AP,OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- - R SSC[1,2] C +MAC:STA,OK
- - SSC SSC[1,2] op -S -o [2,1]
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
force restore cmd set:
- ''
- - SSC SSC[1,2] reboot
- - R SSC[1,2] C !!!ready!!!
- - SSC SSC[1,2] op -S -o 3
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- - R SSC[1,2] C +MAC:AP,OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- - R SSC[1,2] C +MAC:STA,OK
- - SSC SSC[1,2] op -S -o [2,1]
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: PAIR3
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 and DUT2 set to STA+SoftAP mode, two DUTs deinit simple pair
and init simple pair
check cmd set:
- ''
- - SSC SSC[1,2] op -Q
- - R SSC[1,2] C +MODE:[3,3]
- - SSC SSC[1,2] mac -Q -o 3
- - R SSC[1,2] P <target[1,2]_ap_mac> P <target[1,2]_mac>
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
restore cmd set:
- ''
- - SSC SSC[1,2] op -S -o [3,3]
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- - R SSC[1,2] C +MAC:AP,OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- - R SSC[1,2] C +MAC:STA,OK
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
force restore cmd set:
- ''
- - SSC SSC[1,2] reboot
- - R SSC[1,2] C !!!ready!!!
- - SSC SSC[1,2] op -S -o [3,3]
- - R SSC[1,2] C +MODE:OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- - R SSC[1,2] C +MAC:AP,OK
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- - R SSC[1,2] C +MAC:STA,OK
- - SSC SSC[1,2] sp -D
- - R SSC[1,2] C +SP:OK
- - SSC SSC[1,2] sp -I
- - R SSC[1,2] C +SP:OK
restore post cmd set:
- ''
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: STAAP1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA+SoftAP mode, disconnected from AP, enable DHCP client
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- tag: STAAP2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA+SoftAP mode, connected with AP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC1 sta -Q
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- tag: STAM1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA mode, disconnected from AP, enable DHCP client
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:1
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- tag: STAM2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA mode, connected with AP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:1
- - SSC SSC1 sta -Q
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- tag: STAO1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA mode, disconnected from AP, enable DHCP client
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:1
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 sta -D
- - 'R SSC1 C +QAP:'
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- tag: STAO2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA mode, connected with AP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:1
- - SSC SSC1 sta -Q
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 1
- - R SSC1 P <target_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- - R SSC1 C +MAC:STA,OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)
- tag: T1_ETH
<<: *SSC_INIT_COND
initial condition detail: (SSC) ethernet is enabled and got IP from AP
check cmd set:
- ''
- - SSC SSC1 eth -N
- - R SSC1 C +ETHNET:OK
- - SSC SSC1 eth -E
- - R SSC1 C +ETHNET:IP
- - SSC SSC1 ip -I
- - R SSC1 C +ETHIP:192.168
restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 eth -N
- - R SSC1 C +ETHNET:OK
- - SSC SSC1 eth -E
- - R SSC1 C +ETHNET:IP
- - SSC SSC1 ip -I
- - R SSC1 C +ETHIP:192.168
force restore cmd set:
- ''
- - SSC SSC1 restore
- - R SSC1 C !!!ready!!!
- - SSC SSC1 eth -N
- - R SSC1 C +ETHNET:OK
- - SSC SSC1 eth -E
- - R SSC1 C +ETHNET:IP
- - SSC SSC1 ip -I
- - R SSC1 C +ETHIP:192.168
- tag: T2O_1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 set to SoftAP mode, DUT2 set to STA mode, enable DHCP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC2 op -Q
- - R SSC2 C +CURMODE:1
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC2 dhcp -Q -o 1
- - R SSC2 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
- - SSC SSC2 mac -Q -o 1
- - R SSC2 P <target2_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 1
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC2 reboot
- - R SSC2 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 1
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
- tag: T2_1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 set to SoftAP mode, DUT2 set to STA mode, enable DHCP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:2
- - SSC SSC2 op -Q
- - R SSC2 C +CURMODE:1
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC2 dhcp -Q -o 1
- - R SSC2 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
- - SSC SSC2 mac -Q -o 1
- - R SSC2 P <target2_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 1
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC2 reboot
- - R SSC2 C !!!ready!!!
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 1
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - ''
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
- tag: T2_2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 and DUT2 set to STA+SoftAP mode, enable DHCP
check cmd set:
- ''
- *dut1_start_wifi
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC2 op -Q
- - R SSC2 C +CURMODE:3
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - R SSC2 C +CLOSEALL
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 C +DHCP:AP,STARTED
- - SSC SSC2 dhcp -Q -o 1
- - R SSC2 C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
- - SSC SSC2 mac -Q -o 1
- - R SSC2 P <target2_mac>
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 3
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - R SSC2 C +CLOSEALL
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC2 reboot
- - R SSC2 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC2 op -S -o 3
- - R SSC2 C +MODE:OK
- - SSC SSC2 sta -D
- - 'R SSC2 C +QAP:'
- - SSC SSC2 soc -T
- - R SSC2 C +CLOSEALL
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC2 dhcp -S -o 1
- - R SSC2 C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
- tag: T3_1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 set to STA+SoftAP mode, DUT2 and DUT3 set to STA mode
check cmd set:
- ''
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC[2-3] op -Q
- - R SSC[2-3] C +CURMODE:1
- - SSC SSC[1-3] sta -D
- - 'R SSC[1-3] C +QAP:'
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP
- - SSC SSC[2-3] dhcp -Q -o 1
- - R SSC[2-3] C +DHCP:STA,STARTED
- - SSC SSC1 mac -Q -o 2
- - R SSC1 P <target_ap_mac>
- - SSC SSC2 mac -Q -o 1
- - R SSC2 P <target2_mac>
- - SSC SSC3 mac -Q -o 1
- - R SSC3 P <target3_mac>
restore cmd set:
- ''
- - SSC SSC[1-3] op -S -o [3,1,1]
- - R SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] sta -D
- - 'R SSC[1-3] C +QAP:'
- - SSC SSC[1-3] dhcp -S -o [2,1,1]
- - R SSC[1-3] C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
- - SSC SSC3 mac -S -o 1 -m <target3_mac>
- - R SSC3 C +MAC:STA,OK
force restore cmd set:
- ''
- - SSC SSC[1-3] reboot
- - R SSC[1-3] C !!!ready!!!
- - SSC SSC[1-3] op -S -o [3,1,1]
- - R SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] sta -D
- - 'R SSC[1-3] C +QAP:'
- - SSC SSC[1-3] dhcp -S -o [2,1,1]
- - R SSC[1-3] C +DHCP
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- - R SSC1 C +MAC:AP,OK
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- - R SSC2 C +MAC:STA,OK
- - SSC SSC3 mac -S -o 1 -m <target3_mac>
- - R SSC3 C +MAC:STA,OK
- tag: T3_PHY1
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1-2 set to STA+SoftAP mode, DUT3 set to STA mode. All interface of DUT2-3 set to 11n ht40. Set DUT1-2 SoftAP config.
check cmd set:
- ''
- - SSC SSC[1-3] op -Q
- - R SSC[1-3] C +CURMODE:3
- - SSC SSC[1-3] phy -Q -o 3
- - R SSC[1-3] C STA,n,40 C AP,n,40
restore cmd set:
- ''
- - SSC SSC[1-3] op -S -o 3
- - R SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] phy -S -o 3 -m n -b 40
- - R SSC[1-3] C +PHY:OK
force restore cmd set:
- ''
- - SSC SSC[1-3] reboot
- - R SSC[1-3] C !!!ready!!!
- - SSC SSC[1-3] op -S -o 3
- - R SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] phy -S -o 3 -m n -b 40
- - R SSC[1-3] C +PHY:OK
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- - R SSC1 C +CLOSEALL
- - SSC SSC1 sta -R -r 1
- - R SSC1 C OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: WIFIBTSTOP
<<: *SSC_INIT_COND
initial condition detail: (SSC) deinit Wi-Fi and BT host/controller
check cmd set:
- ''
- - SSC SSC1 op -Q
- - R SSC1 C +CURMODE:3
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:OK
- - SSC SSC1 btc -D -z stop
- - 'R SSC1 C +BTC:'
- - SSC SSC1 bt -D -z stop
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:OK
- - SSC SSC1 btc -D -z stop
- - 'R SSC1 C +BTC:'
- - SSC SSC1 bt -D -z stop
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a deinit
- - R SSC1 C +MODE:OK
- - SSC SSC1 btc -D -z stop
- - 'R SSC1 C +BTC:'
- - SSC SSC1 bt -D -z stop
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z disable
- - 'R SSC1 C +BT:'
- - SSC SSC1 bt -D -z deinit
- - 'R SSC1 C +BT:'
- tag: WIFISTO
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT in STA mode, stop Wi-Fi
check cmd set:
- ''
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
restore cmd set:
- ''
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
force restore cmd set:
- ''
- - SSC SSC1 reboot
- - R SSC1 C !!!ready!!!
- - SSC SSC1 op -W -a init
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a start
- - R SSC1 C +MODE:OK
- - SSC SSC1 op -W -a stop
- - R SSC1 C +MODE:OK
- tag: BLE_INIT_REBOOT2
<<: *SSC_INIT_COND
initial condition detail: (SSC) reboot and enable BLE on DUT1 and DUT2
check cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
restore cmd set:
- ''
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
force restore cmd set:
- ''
- - SSC SSC[1-2] reboot
- - R SSC[1-2] C !!!ready!!!
- - SSC SSC[1-2] bt -D -z init
- - 'R SSC[1-2] C +BT:'
- - SSC SSC[1-2] bt -D -z enable
- - 'R SSC[1-2] C +BT:'
restore post cmd set:
- ''
- - SSC SSC[1-2] ble -R
- - 'R SSC[1-2] C +BLE:'
- - SSC SSC[1-2] bleconn -D -z all
- - 'R SSC[1-2] C +BLECONN:'
- - SSC SSC[1-2] blesmp -B -z clear
- - R SSC[1-2] C +BLESMP:ClearBond,Success
- - SSC SSC[1-2] gatts -S -z delete
- - 'R SSC[1-2] C +GATTS:'
- - SSC SSC[1-2] gattc -U -z all
- - R SSC[1-2] C +GATTC:OK
- - SSC SSC[1-2] bleadv -D -z stop
- - R SSC[1-2] C +BLEADV:OK
- - SSC SSC[1-2] ble -S -z public
- - R SSC[1-2] C +BLE:OK
- - SSC SSC1 ram
- - R SSC1 A <heap_size>:(\d+)
- tag: T3_2
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT set to STA+SoftAP mode, DUT2 set to SoftAP mode, DUT3 set to STA mode
check cmd set:
- ''
- - SSC SSC[1,2,3] op -Q
- - R SSC[1,2,3] C +CURMODE:[3,2,1]
- - SSC SSC3 sta -D
- - 'R SSC3 C +QAP:'
restore cmd set:
- ''
- - SSC SSC[1,2,3] op -S -o [3,2,1]
- - R SSC[1,2,3] C +MODE:OK
- - SSC SSC3 sta -D
- - 'R SSC3 C +QAP:'
force restore cmd set:
- ''
- - SSC SSC[1,2,3] reboot
- - R SSC[1,2,3] C !!!ready!!!
- - SSC SSC[1,2,3] op -S -o [3,2,1]
- - R SSC[1,2,3] C +MODE:OK
- - SSC SSC3 sta -D
- - 'R SSC3 C +QAP:'
- tag: T3_3
<<: *SSC_INIT_COND
initial condition detail: (SSC) DUT1 set to SoftAp mode, DUT2-3 set to STA mode
check cmd set:
- ''
- - SSC SSC[1,2,3] op -Q
- - R SSC[1,2,3] C +CURMODE:[2,1,1]
- - SSC SSC[2,3] sta -D
- - 'R SSC[2,3] C +QAP:'
restore cmd set:
- ''
- - SSC SSC[1,2,3] op -S -o [2,1,1]
- - R SSC[1,2,3] C +MODE:OK
- - SSC SSC[2,3] sta -D
- - 'R SSC[2,3] C +QAP:'
force restore cmd set:
- ''
- - SSC SSC[1,2,3] reboot
- - R SSC[1,2,3] C !!!ready!!!
- - SSC SSC[1,2,3] op -S -o [2,1,1]
- - R SSC[1,2,3] C +MODE:OK
- - SSC SSC[2,3] sta -D
- - 'R SSC[2,3] C +QAP:'