mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
395 lines
13 KiB
C
395 lines
13 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
/*
|
|
Tests for the adc device driver
|
|
*/
|
|
#include "esp_system.h"
|
|
#include "driver/adc.h"
|
|
#include "driver/rtc_io.h"
|
|
#include "driver/gpio.h"
|
|
#include "unity.h"
|
|
#include "esp_system.h"
|
|
#include "esp_event.h"
|
|
#include "esp_wifi.h"
|
|
#include "esp_log.h"
|
|
#include "nvs_flash.h"
|
|
#include "test_utils.h"
|
|
#include "soc/adc_periph.h"
|
|
|
|
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3,ESP32C3, ESP32C2)
|
|
#include "driver/dac.h"
|
|
|
|
static const char *TAG = "test_adc";
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
#define ADC1_TEST_WIDTH ADC_WIDTH_BIT_12
|
|
#define ADC2_TEST_WIDTH ADC_WIDTH_BIT_12
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
#define ADC1_TEST_WIDTH ADC_WIDTH_BIT_13 //ESP32S2 only support 13 bit width
|
|
#define ADC2_TEST_WIDTH ADC_WIDTH_BIT_13 //ESP32S2 only support 13 bit width
|
|
#endif
|
|
|
|
#define ADC1_TEST_ATTEN ADC_ATTEN_DB_11
|
|
#define ADC2_TEST_ATTEN ADC_ATTEN_DB_11
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define ADC1_TEST_CHANNEL_NUM 8
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#define ADC1_TEST_CHANNEL_NUM 10
|
|
#endif
|
|
#define ADC2_TEST_CHANNEL_NUM 6
|
|
|
|
static const int adc1_ch[ADC1_TEST_CHANNEL_NUM] = {
|
|
ADC1_CHANNEL_0,
|
|
ADC1_CHANNEL_1,
|
|
ADC1_CHANNEL_2,
|
|
ADC1_CHANNEL_3,
|
|
ADC1_CHANNEL_4,
|
|
ADC1_CHANNEL_5,
|
|
ADC1_CHANNEL_6,
|
|
ADC1_CHANNEL_7,
|
|
#if CONFIG_IDF_TARGET_ESP32S2
|
|
ADC1_CHANNEL_8,
|
|
ADC1_CHANNEL_9,
|
|
#endif
|
|
};
|
|
|
|
static const int adc2_ch[ADC2_TEST_CHANNEL_NUM] = {
|
|
ADC2_CHANNEL_0,
|
|
ADC2_CHANNEL_1,
|
|
ADC2_CHANNEL_2,
|
|
ADC2_CHANNEL_3,
|
|
ADC2_CHANNEL_4,
|
|
ADC2_CHANNEL_5,
|
|
};
|
|
|
|
#define ADC_GET_IO_NUM(periph, channel) (adc_channel_io_map[periph][channel])
|
|
|
|
void adc_fake_tie_middle(adc_unit_t adc_unit, adc_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
if (adc_unit & ADC_UNIT_1) {
|
|
gpio_num = ADC_GET_IO_NUM(0, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_en(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_en(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLUP_PULLDOWN));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED));
|
|
}
|
|
if (adc_unit & ADC_UNIT_2) {
|
|
gpio_num = ADC_GET_IO_NUM(1, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_en(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_en(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLUP_PULLDOWN));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED));
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
}
|
|
|
|
void adc_fake_tie_high(adc_unit_t adc_unit, adc_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
if (adc_unit & ADC_UNIT_1) {
|
|
gpio_num = ADC_GET_IO_NUM(0, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_en(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_dis(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLUP_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_OUTPUT_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_level(gpio_num, 1));
|
|
}
|
|
if (adc_unit & ADC_UNIT_2) {
|
|
gpio_num = ADC_GET_IO_NUM(1, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_en(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_dis(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLUP_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_OUTPUT_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_level(gpio_num, 1));
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
}
|
|
|
|
void adc_fake_tie_low(adc_unit_t adc_unit, adc_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
if (adc_unit & ADC_UNIT_1) {
|
|
gpio_num = ADC_GET_IO_NUM(0, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_dis(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_en(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLDOWN_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_OUTPUT_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_level(gpio_num, 0));
|
|
}
|
|
if (adc_unit & ADC_UNIT_2) {
|
|
gpio_num = ADC_GET_IO_NUM(1, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_dis(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_en(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_PULLDOWN_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_OUTPUT_ONLY));
|
|
TEST_ESP_OK(rtc_gpio_set_level(gpio_num, 0));
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
}
|
|
|
|
void adc_io_normal(adc_unit_t adc_unit, adc_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
if (adc_unit & ADC_UNIT_1) {
|
|
gpio_num = ADC_GET_IO_NUM(0, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_dis(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_dis(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED));
|
|
}
|
|
if (adc_unit & ADC_UNIT_2) {
|
|
gpio_num = ADC_GET_IO_NUM(1, channel);
|
|
TEST_ESP_OK(rtc_gpio_init(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pullup_dis(gpio_num));
|
|
TEST_ESP_OK(rtc_gpio_pulldown_dis(gpio_num));
|
|
TEST_ESP_OK(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
|
|
TEST_ESP_OK(rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED));
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
}
|
|
|
|
TEST_CASE("ADC1 rtc read", "[adc1]")
|
|
{
|
|
int adc1_val[ADC1_TEST_CHANNEL_NUM] = {0};
|
|
|
|
/* adc1 Configure */
|
|
adc1_config_width(ADC1_TEST_WIDTH);
|
|
ESP_LOGI(TAG, "ADC1 [CH - GPIO]:");
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc1_config_channel_atten(adc1_ch[i], ADC1_TEST_ATTEN) );
|
|
ESP_LOGI(TAG, "[CH%d - IO%d]:", adc1_ch[i], ADC_GET_IO_NUM(0, adc1_ch[i]));
|
|
}
|
|
printf("ADC tie normal read: ");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
|
|
/* adc Read */
|
|
printf("ADC1: ");
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc1_val[i] = adc1_get_raw((adc1_channel_t)adc1_ch[i]);
|
|
printf("CH%d-%d ", adc1_ch[i], adc1_val[i]);
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie high */
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_high(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
printf("ADC tie high read: ");
|
|
vTaskDelay(50 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC1: ");
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc1_val[i] = adc1_get_raw((adc1_channel_t)adc1_ch[i]);
|
|
printf("CH%d-%d ", adc1_ch[i], adc1_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_EQUAL( adc1_val[i], 0x1fff );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie low */
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_low(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
printf("ADC tie low read: ");
|
|
vTaskDelay(50 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC1: ");
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc1_val[i] = adc1_get_raw((adc1_channel_t)adc1_ch[i]);
|
|
printf("CH%d-%d ", adc1_ch[i], adc1_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_INT_WITHIN( 100, 0, adc1_val[i] );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie midedle */
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_middle(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
printf("ADC tie mid read: ");
|
|
vTaskDelay(50 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC1: ");
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc1_val[i] = adc1_get_raw((adc1_channel_t)adc1_ch[i]);
|
|
printf("CH%d-%d ", adc1_ch[i], adc1_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_NOT_EQUAL( adc1_val[i], 0x1fff );
|
|
TEST_ASSERT_NOT_EQUAL( adc1_val[i], 0 );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_io_normal(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
}
|
|
|
|
TEST_CASE("ADC2 rtc read", "[adc2]")
|
|
{
|
|
int adc2_val[ADC2_TEST_CHANNEL_NUM] = {0};
|
|
|
|
/* adc2 Configure */
|
|
ESP_LOGI(TAG, "ADC2 [CH - GPIO]:");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_config_channel_atten(adc2_ch[i], ADC2_TEST_ATTEN) );
|
|
ESP_LOGI(TAG, "[CH%d - IO%d]:", adc2_ch[i], ADC_GET_IO_NUM(1, adc2_ch[i]));
|
|
}
|
|
printf("ADC float read: ");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
|
|
/* adc Read */
|
|
printf("ADC2: ");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_get_raw((adc2_channel_t)adc2_ch[i], ADC2_TEST_WIDTH, &adc2_val[i]) );
|
|
printf("CH%d-%d ", adc2_ch[i], adc2_val[i]);
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie high */
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_high(ADC_UNIT_2, adc2_ch[i]);
|
|
}
|
|
printf("ADC tie high read: ");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC2: ");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_get_raw((adc2_channel_t)adc2_ch[i], ADC2_TEST_WIDTH, &adc2_val[i]) );
|
|
printf("CH%d-%d ", adc2_ch[i], adc2_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_EQUAL( adc2_val[i], 0x1fff );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie low */
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_low(ADC_UNIT_2, adc2_ch[i]);
|
|
}
|
|
printf("ADC tie low read: ");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC2: ");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_get_raw((adc2_channel_t)adc2_ch[i], ADC2_TEST_WIDTH, &adc2_val[i]) );
|
|
printf("CH%d-%d ", adc2_ch[i], adc2_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_INT_WITHIN( 100, 0, adc2_val[i] );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
/* tie midedle */
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_middle(ADC_UNIT_2, adc2_ch[i]);
|
|
}
|
|
printf("ADC tie middle read: ");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
/* adc Read */
|
|
printf("ADC2: ");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_get_raw((adc2_channel_t)adc2_ch[i], ADC2_TEST_WIDTH, &adc2_val[i]) );
|
|
printf("CH%d-%d ", adc2_ch[i], adc2_val[i]);
|
|
#ifdef CONFIG_IDF_TARGET_ESP32S2
|
|
TEST_ASSERT_NOT_EQUAL( 0, adc2_val[i] );
|
|
TEST_ASSERT_NOT_EQUAL( 0x1fff, adc2_val[i] );
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_io_normal(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
}
|
|
|
|
#include "touch_scope.h"
|
|
/**
|
|
* 0: ADC1 channels raw data debug.
|
|
* 1: ADC2 channels raw data debug.
|
|
*/
|
|
#define SCOPE_DEBUG_TYPE 1
|
|
#define SCOPE_DEBUG_CHANNEL_MAX (10)
|
|
#define SCOPE_DEBUG_ENABLE (0)
|
|
#define SCOPE_UART_BUADRATE (256000)
|
|
#define SCOPE_DEBUG_FREQ_MS (50)
|
|
|
|
/**
|
|
* Manual test: Capture ADC-DMA data and display it on the serial oscilloscope. Used to observe the stability of the data.
|
|
* Use step:
|
|
* 1. Call this function in `esp-idf/tools/unit-test-app/main/app_main.c`.
|
|
* 2. Use `ESP-Tuning Tool`(download from `www.espressif.com`) to capture.
|
|
* 3. The readings of multiple channels will be displayed on the tool.
|
|
*/
|
|
void test_adc_slope_debug(void)
|
|
{
|
|
float scope_temp[SCOPE_DEBUG_CHANNEL_MAX] = {0}; // max scope channel is 10.
|
|
test_tp_scope_debug_init(0, -1, -1, SCOPE_UART_BUADRATE);
|
|
|
|
#if SCOPE_DEBUG_TYPE == 0
|
|
/* adc1 Configure */
|
|
adc1_config_width(ADC1_TEST_WIDTH);
|
|
ESP_LOGI(TAG, "ADC1 [CH - GPIO] atten %d:", ADC1_TEST_ATTEN);
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc1_config_channel_atten(adc1_ch[i], ADC1_TEST_ATTEN) );
|
|
ESP_LOGI(TAG, "[CH%d - IO%d]", adc1_ch[i], ADC_GET_IO_NUM(0, adc1_ch[i]));
|
|
}
|
|
/* tie midedle */
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_middle(ADC_UNIT_1, adc1_ch[i]);
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
|
|
while (1) {
|
|
/* adc Read */
|
|
for (int i = 0; i < ADC1_TEST_CHANNEL_NUM; i++) {
|
|
scope_temp[i] = adc1_get_raw((adc1_channel_t)adc1_ch[i]);
|
|
}
|
|
test_tp_print_to_scope(scope_temp, ADC1_TEST_CHANNEL_NUM);
|
|
vTaskDelay(SCOPE_DEBUG_FREQ_MS / portTICK_RATE_MS);
|
|
}
|
|
#elif SCOPE_DEBUG_TYPE == 1
|
|
int adc2_val[ADC2_TEST_CHANNEL_NUM] = {0};
|
|
|
|
/* adc2 Configure */
|
|
ESP_LOGI(TAG, "ADC2 [CH - GPIO] atten %d:", ADC2_TEST_ATTEN);
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
TEST_ESP_OK( adc2_config_channel_atten(adc2_ch[i], ADC2_TEST_ATTEN) );
|
|
ESP_LOGI(TAG, "[CH%d - IO%d]:", adc2_ch[i], ADC_GET_IO_NUM(1, adc2_ch[i]));
|
|
}
|
|
/* tie midedle */
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
adc_fake_tie_middle(ADC_UNIT_2, adc2_ch[i]);
|
|
}
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
|
|
while (1) {
|
|
/* adc Read */
|
|
printf("ADC2: ");
|
|
for (int i = 0; i < ADC2_TEST_CHANNEL_NUM; i++) {
|
|
adc2_get_raw((adc2_channel_t)adc2_ch[i], ADC2_TEST_WIDTH, &adc2_val[i]);
|
|
scope_temp[i] = adc2_val[i];
|
|
}
|
|
|
|
test_tp_print_to_scope(scope_temp, ADC2_TEST_CHANNEL_NUM);
|
|
vTaskDelay(SCOPE_DEBUG_FREQ_MS / portTICK_RATE_MS);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#endif
|