esp-idf/components/spi_flash/flash_ops.c

288 lines
8.2 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdlib.h>
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include <sys/param.h> // For MIN/MAX(a, b)
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
#include <soc/soc.h>
#include <soc/soc_memory_layout.h>
#include "soc/io_mux_reg.h"
#include "sdkconfig.h"
#include "esp_attr.h"
#include "esp_cpu.h"
#include "spi_flash_mmap.h"
#include "esp_log.h"
#include "esp_private/system_internal.h"
#include "esp_private/spi_flash_os.h"
#include "esp_private/esp_clk.h"
#include "esp_private/esp_gpio_reserve.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/cache.h"
#include "esp32/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "soc/spi_mem_reg.h"
#include "esp32s3/rom/opi_flash.h"
#include "esp32s3/rom/cache.h"
#include "esp32s3/opi_flash_private.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32C6
#include "esp32c6/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32C61
#include "esp32c61/rom/cache.h"
#endif
#include "esp_rom_spiflash.h"
#include "esp_flash_partitions.h"
#include "esp_private/mspi_timing_tuning.h"
#include "esp_private/cache_utils.h"
#include "esp_flash.h"
#include "esp_attr.h"
#include "bootloader_flash.h"
#include "bootloader_flash_config.h"
#include "esp_compiler.h"
#include "esp_rom_efuse.h"
#if CONFIG_SPIRAM
#include "esp_private/esp_psram_io.h"
#endif
#if SOC_MEMSPI_CLOCK_IS_INDEPENDENT
#include "hal/cache_hal.h"
#endif
/* bytes erased by SPIEraseBlock() ROM function */
#define BLOCK_ERASE_SIZE 65536
/* Limit number of bytes written/read in a single SPI operation,
as these operations disable all higher priority tasks from running.
*/
#ifdef CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
#define MAX_WRITE_CHUNK CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
#else
#define MAX_WRITE_CHUNK 8192
#endif // CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
#define MAX_READ_CHUNK 16384
static const char *TAG __attribute__((unused)) = "spi_flash";
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_default_ops = {
.start = spi_flash_disable_interrupts_caches_and_other_cpu,
.end = spi_flash_enable_interrupts_caches_and_other_cpu,
};
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_no_os_ops = {
.start = spi_flash_disable_interrupts_caches_and_other_cpu_no_os,
.end = spi_flash_enable_interrupts_caches_no_os,
};
static const spi_flash_guard_funcs_t *s_flash_guard_ops;
void IRAM_ATTR spi_flash_guard_set(const spi_flash_guard_funcs_t *funcs)
{
s_flash_guard_ops = funcs;
}
const spi_flash_guard_funcs_t *IRAM_ATTR spi_flash_guard_get(void)
{
return s_flash_guard_ops;
}
#ifdef CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS
#define UNSAFE_WRITE_ADDRESS abort()
#else
#define UNSAFE_WRITE_ADDRESS return false
#endif
static __attribute__((unused)) bool is_safe_write_address(size_t addr, size_t size)
{
if (!esp_partition_main_flash_region_safe(addr, size)) {
UNSAFE_WRITE_ADDRESS;
}
return true;
}
#if CONFIG_SPI_FLASH_ROM_IMPL
#include "esp_heap_caps.h"
void IRAM_ATTR *spi_flash_malloc_internal(size_t size)
{
return heap_caps_malloc(size, MALLOC_CAP_8BIT|MALLOC_CAP_INTERNAL);
}
void IRAM_ATTR spi_flash_rom_impl_init(void)
{
spi_flash_guard_set(&g_flash_guard_default_ops);
/* These two functions are in ROM only */
extern void spi_flash_mmap_os_func_set(void *(*func1)(size_t size), void (*func2)(void *p));
spi_flash_mmap_os_func_set(spi_flash_malloc_internal, heap_caps_free);
extern esp_err_t spi_flash_mmap_page_num_init(uint32_t page_num);
spi_flash_mmap_page_num_init(128);
}
#endif
void IRAM_ATTR esp_mspi_pin_init(void)
{
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
bool octal_mspi_required = bootloader_flash_is_octal_mode_enabled();
#if CONFIG_SPIRAM_MODE_OCT
octal_mspi_required |= true;
#endif
if (octal_mspi_required) {
esp_rom_opiflash_pin_config();
mspi_timing_set_pin_drive_strength();
}
//Set F4R4 board pin drive strength. TODO: IDF-3663
#endif
/* Reserve the GPIO pins */
uint64_t reserve_pin_mask = 0;
for (esp_mspi_io_t i = 0; i < ESP_MSPI_IO_MAX; i++) {
reserve_pin_mask |= BIT64(esp_mspi_get_io(i));
}
esp_gpio_reserve(reserve_pin_mask);
}
esp_err_t IRAM_ATTR spi_flash_init_chip_state(void)
{
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
if (bootloader_flash_is_octal_mode_enabled()) {
return esp_opiflash_init(rom_spiflash_legacy_data->chip.device_id);
}
#endif
#if CONFIG_SPI_FLASH_HPM_ON
return spi_flash_enable_high_performance_mode();
#endif // CONFIG_SPI_FLASH_HPM_ON
return ESP_OK;
}
void IRAM_ATTR spi_flash_set_rom_required_regs(void)
{
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
if (bootloader_flash_is_octal_mode_enabled()) {
//Disable the variable dummy mode when doing timing tuning
CLEAR_PERI_REG_MASK(SPI_MEM_DDR_REG(1), SPI_MEM_SPI_FMEM_VAR_DUMMY);
/**
* STR /DTR mode setting is done every time when `esp_rom_opiflash_exec_cmd` is called
*
* Add any registers that are not set in ROM SPI flash functions here in the future
*/
}
#endif
}
#if CONFIG_SPIRAM_MODE_OCT
// This function will only be called when Octal PSRAM enabled.
void IRAM_ATTR spi_flash_set_vendor_required_regs(void)
{
if (bootloader_flash_is_octal_mode_enabled()) {
esp_opiflash_set_required_regs();
SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 1, SPI_MEM_CACHE_USR_CMD_4BYTE_S);
} else {
//Flash chip requires MSPI specifically, call this function to set them
// Set back MSPI registers after Octal PSRAM initialization.
SET_PERI_REG_BITS(SPI_MEM_CACHE_FCTRL_REG(1), SPI_MEM_CACHE_USR_CMD_4BYTE_V, 0, SPI_MEM_CACHE_USR_CMD_4BYTE_S);
}
}
#endif
static const uint8_t s_mspi_io_num_default[] = {
SPI_CLK_GPIO_NUM,
SPI_Q_GPIO_NUM,
SPI_D_GPIO_NUM,
SPI_CS0_GPIO_NUM,
SPI_HD_GPIO_NUM,
SPI_WP_GPIO_NUM,
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
SPI_DQS_GPIO_NUM,
SPI_D4_GPIO_NUM,
SPI_D5_GPIO_NUM,
SPI_D6_GPIO_NUM,
SPI_D7_GPIO_NUM
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
};
uint8_t esp_mspi_get_io(esp_mspi_io_t io)
{
#if CONFIG_SPIRAM
if (io == ESP_MSPI_IO_CS1) {
return esp_psram_io_get_cs_io();
}
#endif
assert(io >= ESP_MSPI_IO_CLK);
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
assert(io <= ESP_MSPI_IO_D7);
#else
assert(io <= ESP_MSPI_IO_WP);
#endif
#if SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
uint8_t mspi_io = 0;
uint32_t spiconfig = 0;
if (io == ESP_MSPI_IO_WP) {
/**
* wp pad is a bit special:
* 1. since 32's efuse does not have enough bits for wp pad, so wp pad config put in flash bin header
* 2. rom code take 0x3f as invalid wp pad num, but take 0 as other invalid mspi pads num
*/
#if CONFIG_IDF_TARGET_ESP32
return bootloader_flash_get_wp_pin();
#else
spiconfig = esp_rom_efuse_get_flash_wp_gpio();
return (spiconfig == 0x3f) ? s_mspi_io_num_default[io] : spiconfig & 0x3f;
#endif
}
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
spiconfig = (io < ESP_MSPI_IO_WP) ? esp_rom_efuse_get_flash_gpio_info() : esp_rom_efuse_get_opiconfig();
#else
spiconfig = esp_rom_efuse_get_flash_gpio_info();
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
if (spiconfig == ESP_ROM_EFUSE_FLASH_DEFAULT_SPI) {
mspi_io = s_mspi_io_num_default[io];
} else if (io < ESP_MSPI_IO_WP) {
/**
* [0 : 5] -- CLK
* [6 :11] -- Q(D1)
* [12:17] -- D(D0)
* [18:23] -- CS
* [24:29] -- HD(D3)
*/
mspi_io = (spiconfig >> io * 6) & 0x3f;
}
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
else {
/**
* [0 : 5] -- DQS
* [6 :11] -- D4
* [12:17] -- D5
* [18:23] -- D6
* [24:29] -- D7
*/
mspi_io = (spiconfig >> (io - ESP_MSPI_IO_DQS) * 6) & 0x3f;
}
#endif // SOC_SPI_MEM_SUPPORT_OPI_MODE
return mspi_io;
#else // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
return s_mspi_io_num_default[io];
#endif // SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE
}