alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
a3d3b74e35
esp-idf/components/soc/esp32s2/include/soc/soc_caps.h

501 lines
24 KiB
C
Raw Blame History

/*
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*
* Soc capabilities file, describing the following chip attributes:
* - Peripheral or feature supported or not
* - Number of resources (peripheral, channel, etc.)
* - Maximum / Minimum value of HW, including: buffer/fifo size, length of transaction, frequency
* supported, etc.
*
* For boolean definitions:
* - if true: `#define MODULE_[SUBMODULE_]SUPPORT_FEATURE 1`.
* (`#define` blank string causes error when checking by `#if x`)
* - if false: not define anything at all.
* (`#ifdef x` is true even when `#define 0` is defined before.)
*
* The code depending on this file uses these boolean definitions as `#if x` or `#if !x`.
* (`#ifdef/ifndef x` is not compatible with `#define x 0`. Though we don't suggest to use `#define
* x 0`, it's still a risk.)
*
* ECO & exceptions:
* For ECO-ed booleans, `#define x "Not determined"` for them. This will cause error when used by
* `#if x` and `#if !x`, making these missing definitions more obvious.
*
* These defines are parsed and imported as kconfig variables via the script
* `tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py`
*
* If this file is changed the script will automatically run the script
* and generate the kconfig variables as part of the pre-commit hooks.
*
* It can also be run manually. For more information, see `${IDF_PATH}/tools/gen_soc_caps_kconfig/README.md`
*/
#pragma once
/*-------------------------- COMMON CAPS ---------------------------------------*/
#define SOC_ADC_SUPPORTED 1
#define SOC_DAC_SUPPORTED 1
#define SOC_UART_SUPPORTED 1
#define SOC_TWAI_SUPPORTED 1
#define SOC_CP_DMA_SUPPORTED 1
#define SOC_DEDICATED_GPIO_SUPPORTED 1
#define SOC_GPTIMER_SUPPORTED 1
#define SOC_SUPPORTS_SECURE_DL_MODE 1
#define SOC_ULP_FSM_SUPPORTED 1
#define SOC_RISCV_COPROC_SUPPORTED 1
#define SOC_USB_OTG_SUPPORTED 1
#define SOC_PCNT_SUPPORTED 1
#define SOC_PHY_SUPPORTED 1
#define SOC_WIFI_SUPPORTED 1
#define SOC_ULP_SUPPORTED 1
#define SOC_CCOMP_TIMER_SUPPORTED 1
#define SOC_ASYNC_MEMCPY_SUPPORTED 1
#define SOC_EFUSE_KEY_PURPOSE_FIELD 1
#define SOC_EFUSE_SUPPORTED 1
#define SOC_TEMP_SENSOR_SUPPORTED 1
#define SOC_CACHE_SUPPORT_WRAP 1
#define SOC_RTC_FAST_MEM_SUPPORTED 1
#define SOC_RTC_SLOW_MEM_SUPPORTED 1
#define SOC_RTC_MEM_SUPPORTED 1
#define SOC_PSRAM_DMA_CAPABLE 1
#define SOC_XT_WDT_SUPPORTED 1
#define SOC_I2S_SUPPORTED 1
#define SOC_RMT_SUPPORTED 1
#define SOC_SDM_SUPPORTED 1
#define SOC_GPSPI_SUPPORTED 1
#define SOC_LEDC_SUPPORTED 1
#define SOC_I2C_SUPPORTED 1
#define SOC_SYSTIMER_SUPPORTED 1
#define SOC_SUPPORT_COEXISTENCE 0
#define SOC_AES_SUPPORTED 1
#define SOC_MPI_SUPPORTED 1
#define SOC_SHA_SUPPORTED 1
#define SOC_HMAC_SUPPORTED 1
#define SOC_DIG_SIGN_SUPPORTED 1
#define SOC_FLASH_ENC_SUPPORTED 1
#define SOC_SECURE_BOOT_SUPPORTED 1
#define SOC_MEMPROT_SUPPORTED 1
#define SOC_TOUCH_SENSOR_SUPPORTED 1
#define SOC_BOD_SUPPORTED 1
#define SOC_CLK_TREE_SUPPORTED 1
#define SOC_MPU_SUPPORTED 1
#define SOC_WDT_SUPPORTED 1
#define SOC_SPI_FLASH_SUPPORTED 1
#define SOC_RNG_SUPPORTED 1
#define SOC_LIGHT_SLEEP_SUPPORTED 1
#define SOC_DEEP_SLEEP_SUPPORTED 1
#define SOC_LP_PERIPH_SHARE_INTERRUPT 1 // LP peripherals sharing the same interrupt source
#define SOC_PM_SUPPORTED 1
/*-------------------------- XTAL CAPS ---------------------------------------*/
#define SOC_XTAL_SUPPORT_40M 1
/*-------------------------- ADC CAPS ----------------------------------------*/
/*!< SAR ADC Module*/
#define SOC_ADC_RTC_CTRL_SUPPORTED 1
#define SOC_ADC_DIG_CTRL_SUPPORTED 1
#define SOC_ADC_ARBITER_SUPPORTED 1
#define SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1
#define SOC_ADC_DIG_IIR_FILTER_UNIT_BINDED 1 //ADC filter is binded with the ADC unit
#define SOC_ADC_MONITOR_SUPPORTED 1
#define SOC_ADC_DMA_SUPPORTED 1
#define SOC_ADC_DIG_SUPPORTED_UNIT(UNIT) 1 //Digital controller supported ADC unit
#define SOC_ADC_PERIPH_NUM (2)
#define SOC_ADC_CHANNEL_NUM(UNIT) (10)
#define SOC_ADC_MAX_CHANNEL_NUM (10)
#define SOC_ADC_ATTEN_NUM (4)
/*!< Digital */
#define SOC_ADC_DIGI_CONTROLLER_NUM (2)
#define SOC_ADC_PATT_LEN_MAX (32) /*!< Two pattern table, each contains 16 items. Each item takes 1 byte */
#define SOC_ADC_DIGI_MIN_BITWIDTH (12)
#define SOC_ADC_DIGI_MAX_BITWIDTH (12)
#define SOC_ADC_DIGI_IIR_FILTER_NUM (2)
#define SOC_ADC_DIGI_RESULT_BYTES (2)
#define SOC_ADC_DIGI_DATA_BYTES_PER_CONV (2)
#define SOC_ADC_DIGI_MONITOR_NUM (2)
/*!< F_sample = F_digi_con / 2 / interval. F_digi_con = 5M for now. 30 <= interval<= 4095 */
#define SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333
#define SOC_ADC_SAMPLE_FREQ_THRES_LOW 611
/*!< RTC */
#define SOC_ADC_RTC_MIN_BITWIDTH (13)
#define SOC_ADC_RTC_MAX_BITWIDTH (13)
/*!< Calibration */
#define SOC_ADC_CALIBRATION_V1_SUPPORTED (1) /*!< support HW offset calibration version 1*/
#define SOC_ADC_SELF_HW_CALI_SUPPORTED (1) /*!< support HW offset self calibration */
/*!< ADC power control is shared by PWDET, TempSensor */
#define SOC_ADC_SHARED_POWER 1
/*-------------------------- BROWNOUT CAPS -----------------------------------*/
#define SOC_BROWNOUT_RESET_SUPPORTED 1
/*-------------------------- CACHE CAPS --------------------------------------*/
#define SOC_CACHE_WRITEBACK_SUPPORTED 1
/*-------------------------- CP-DMA CAPS -------------------------------------*/
#define SOC_CP_DMA_MAX_BUFFER_SIZE (4095) /*!< Maximum size of the buffer that can be attached to descriptor */
/*-------------------------- CPU CAPS ----------------------------------------*/
#define SOC_CPU_CORES_NUM (1U)
#define SOC_CPU_INTR_NUM 32
#define SOC_CPU_BREAKPOINTS_NUM 2
#define SOC_CPU_WATCHPOINTS_NUM 2
#define SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 64 // bytes
/*-------------------------- DAC CAPS ----------------------------------------*/
#define SOC_DAC_CHAN_NUM 2
#define SOC_DAC_RESOLUTION 8 // DAC resolution ratio 8 bit
/*-------------------------- GPIO CAPS ---------------------------------------*/
// ESP32-S2 has 1 GPIO peripheral
#define SOC_GPIO_PORT 1U
#define SOC_GPIO_PIN_COUNT 47
#define SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1
#define SOC_GPIO_FILTER_CLK_SUPPORT_APB 1
// On ESP32-S2 those PADs which have RTC functions must set pullup/down/capability via RTC register.
// On ESP32-S2, Digital IOs have their own registers to control pullup/down/capability, independent with RTC registers.
#define SOC_GPIO_SUPPORT_RTC_INDEPENDENT (1)
// Force hold is a new function of ESP32-S2
#define SOC_GPIO_SUPPORT_FORCE_HOLD (1)
// 0~46 valid except 22~25
#define SOC_GPIO_VALID_GPIO_MASK (0x7FFFFFFFFFFFULL & ~(0ULL | BIT22 | BIT23 | BIT24 | BIT25))
// GPIO 46 is input only
#define SOC_GPIO_VALID_OUTPUT_GPIO_MASK (SOC_GPIO_VALID_GPIO_MASK & ~(0ULL | BIT46))
#define SOC_GPIO_IN_RANGE_MAX 46
#define SOC_GPIO_OUT_RANGE_MAX 45
// digital I/O pad powered by VDD3P3_CPU or VDD_SPI(GPIO_NUM_26~GPIO_NUM_46)
#define SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x00007FFFFC000000ULL
// The Clock Out signal is binding to the pin's IO_MUX function
#define SOC_GPIO_CLOCKOUT_BY_IO_MUX (1)
#define SOC_GPIO_CLOCKOUT_CHANNEL_NUM (3)
/*-------------------------- Dedicated GPIO CAPS ---------------------------------------*/
#define SOC_DEDIC_GPIO_OUT_CHANNELS_NUM (8) /*!< 8 outward channels on each CPU core */
#define SOC_DEDIC_GPIO_IN_CHANNELS_NUM (8) /*!< 8 inward channels on each CPU core */
#define SOC_DEDIC_GPIO_ALLOW_REG_ACCESS (1) /*!< Allow access dedicated GPIO channel by register */
#define SOC_DEDIC_GPIO_HAS_INTERRUPT (1) /*!< Dedicated GPIO has its own interrupt source */
#define SOC_DEDIC_GPIO_OUT_AUTO_ENABLE (1) /*!< Dedicated GPIO output attribution is enabled automatically */
/*-------------------------- I2C CAPS ----------------------------------------*/
// ESP32-S2 has 2 I2C
#define SOC_I2C_NUM (2U)
#define SOC_HP_I2C_NUM (2U)
#define SOC_I2C_FIFO_LEN (32) /*!< I2C hardware FIFO depth */
#define SOC_I2C_CMD_REG_NUM (16) /*!< Number of I2C command registers */
#define SOC_I2C_SUPPORT_SLAVE (1)
// FSM_RST only resets the FSM, not using it. So SOC_I2C_SUPPORT_HW_FSM_RST not defined.
//ESP32-S2 support hardware clear bus
#define SOC_I2C_SUPPORT_HW_CLR_BUS (1)
#define SOC_I2C_SUPPORT_REF_TICK (1)
#define SOC_I2C_SUPPORT_APB (1)
/*-------------------------- I2S CAPS ----------------------------------------*/
// ESP32-S2 has 1 I2S
#define SOC_I2S_NUM (1U)
#define SOC_I2S_HW_VERSION_1 (1)
#define SOC_I2S_SUPPORTS_APLL (1)
#define SOC_I2S_SUPPORTS_PLL_F160M (1)
#define SOC_I2S_SUPPORTS_DMA_EQUAL (1)
#define SOC_I2S_SUPPORTS_LCD_CAMERA (1)
#define SOC_I2S_APLL_MIN_FREQ (250000000)
#define SOC_I2S_APLL_MAX_FREQ (500000000)
#define SOC_I2S_APLL_MIN_RATE (10675) //in Hz, I2S Clock rate limited by hardware
#define SOC_I2S_LCD_I80_VARIANT (1)
/*-------------------------- LCD CAPS ----------------------------------------*/
/* Notes: On esp32-s2, LCD intel 8080 timing is generated by I2S peripheral */
#define SOC_LCD_I80_SUPPORTED (1) /*!< Intel 8080 LCD is supported */
#define SOC_LCD_I80_BUSES (1U) /*!< Only I2S0 has LCD mode */
#define SOC_LCD_I80_BUS_WIDTH (24) /*!< Intel 8080 bus width */
/*-------------------------- LEDC CAPS ---------------------------------------*/
#define SOC_LEDC_HAS_TIMER_SPECIFIC_MUX (1)
#define SOC_LEDC_SUPPORT_APB_CLOCK (1)
#define SOC_LEDC_SUPPORT_REF_TICK (1)
#define SOC_LEDC_SUPPORT_XTAL_CLOCK (1)
#define SOC_LEDC_CHANNEL_NUM (8)
#define SOC_LEDC_TIMER_BIT_WIDTH (14)
#define SOC_LEDC_SUPPORT_FADE_STOP (1)
/*-------------------------- MMU CAPS ----------------------------------------*/
#define SOC_MMU_LINEAR_ADDRESS_REGION_NUM 5
#define SOC_MMU_PERIPH_NUM (1U)
/*-------------------------- MPU CAPS ----------------------------------------*/
//TODO: correct the caller and remove unsupported lines
#define SOC_MPU_CONFIGURABLE_REGIONS_SUPPORTED 0
#define SOC_MPU_MIN_REGION_SIZE 0x20000000U
#define SOC_MPU_REGIONS_MAX_NUM 8
#define SOC_MPU_REGION_RO_SUPPORTED 0
#define SOC_MPU_REGION_WO_SUPPORTED 0
/*-------------------------- PCNT CAPS ---------------------------------------*/
#define SOC_PCNT_GROUPS (1U)
#define SOC_PCNT_UNITS_PER_GROUP (4)
#define SOC_PCNT_CHANNELS_PER_UNIT (2)
#define SOC_PCNT_THRES_POINT_PER_UNIT (2)
/*-------------------------- RMT CAPS ----------------------------------------*/
#define SOC_RMT_GROUPS 1U /*!< One RMT group */
#define SOC_RMT_TX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Transmit in each group */
#define SOC_RMT_RX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Receive in each group */
#define SOC_RMT_CHANNELS_PER_GROUP 4 /*!< Total 4 channels */
#define SOC_RMT_MEM_WORDS_PER_CHANNEL 64 /*!< Each channel owns 64 words memory (1 word = 4 Bytes) */
#define SOC_RMT_SUPPORT_RX_DEMODULATION 1 /*!< Support signal demodulation on RX path (i.e. remove carrier) */
#define SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 /*!< Support stop transmission asynchronously */
#define SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 /*!< Support transmitting specified number of cycles in loop mode */
#define SOC_RMT_SUPPORT_TX_SYNCHRO 1 /*!< Support coordinate a group of TX channels to start simultaneously */
#define SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 /*!< TX carrier can be modulated to data phase only */
#define SOC_RMT_SUPPORT_REF_TICK 1 /*!< Support set REF_TICK as the RMT clock source */
#define SOC_RMT_SUPPORT_APB 1 /*!< Support set APB as the RMT clock source */
#define SOC_RMT_CHANNEL_CLK_INDEPENDENT 1 /*!< Can select different source clock for each channel */
/*-------------------------- RTCIO CAPS --------------------------------------*/
#define SOC_RTCIO_PIN_COUNT 22
#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 /* This macro indicates that the target has separate RTC IOMUX hardware feature,
* so it supports unique IOMUX configuration (including IE, OE, PU, PD, DRV etc.)
* when the pins are switched to RTC function.
*/
#define SOC_RTCIO_HOLD_SUPPORTED 1
#define SOC_RTCIO_WAKE_SUPPORTED 1
/*-------------------------- Sigma Delta Modulator CAPS -----------------*/
#define SOC_SDM_GROUPS 1U
#define SOC_SDM_CHANNELS_PER_GROUP 8
#define SOC_SDM_CLK_SUPPORT_APB 1
/*-------------------------- SPI CAPS ----------------------------------------*/
#define SOC_SPI_HD_BOTH_INOUT_SUPPORTED 1 //Support enabling MOSI and MISO phases together under Halfduplex mode
#define SOC_SPI_PERIPH_NUM 3
#define SOC_SPI_DMA_CHAN_NUM 3
#define SOC_SPI_PERIPH_CS_NUM(i) (((i)==0)? 2: (((i)==1)? 6: 3))
#define SOC_SPI_MAX_CS_NUM 6
#define SOC_SPI_MAXIMUM_BUFFER_SIZE 72
#define SOC_SPI_MAX_PRE_DIVIDER 8192
#define SOC_SPI_SUPPORT_DDRCLK 1
#define SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1
#define SOC_SPI_SUPPORT_CD_SIG 1
#define SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1
#define SOC_SPI_SUPPORT_CLK_APB 1
/// The SPI Slave half duplex mode has been updated greatly in ESP32-S2
#define SOC_SPI_SUPPORT_SLAVE_HD_VER2 1
// Peripheral supports DIO, DOUT, QIO, or QOUT
// VSPI (SPI3) only support 1-bit mode
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(host_id) ((host_id) != 2)
// Peripheral supports output given level during its "dummy phase"
// Only SPI1 supports this feature
#define SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1
#define SOC_SPI_SUPPORT_OCT 1
#define SOC_SPI_SCT_SUPPORTED 1
#define SOC_SPI_SCT_SUPPORTED_PERIPH(PERIPH_NUM) (((PERIPH_NUM==1) || (PERIPH_NUM==2)) ? 1 : 0) //Support Segmented-Configure-Transfer
#define SOC_SPI_SCT_REG_NUM 27
#define SOC_SPI_SCT_BUFFER_NUM_MAX (1 + SOC_SPI_SCT_REG_NUM) //1-word-bitmap + 27-word-regs
#define SOC_SPI_SCT_CONF_BITLEN_MAX 0x7FFFFD //23 bit wide reg
#define SOC_MEMSPI_IS_INDEPENDENT 1
#define SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1
/*-------------------------- SYSTIMER CAPS ----------------------------------*/
#define SOC_SYSTIMER_COUNTER_NUM 1 // Number of counter units
#define SOC_SYSTIMER_ALARM_NUM 3 // Number of alarm units
#define SOC_SYSTIMER_BIT_WIDTH_LO 32 // Bit width of systimer low part
#define SOC_SYSTIMER_BIT_WIDTH_HI 32 // Bit width of systimer high part
/*-------------------------- TIMER GROUP CAPS --------------------------------*/
#define SOC_TIMER_GROUPS (2)
#define SOC_TIMER_GROUP_TIMERS_PER_GROUP (2)
#define SOC_TIMER_GROUP_COUNTER_BIT_WIDTH (64)
#define SOC_TIMER_GROUP_SUPPORT_XTAL (1)
#define SOC_TIMER_GROUP_SUPPORT_APB (1)
#define SOC_TIMER_GROUP_TOTAL_TIMERS (4)
/*-------------------------- TOUCH SENSOR CAPS -------------------------------*/
#define SOC_TOUCH_SENSOR_VERSION (2) /*!<Hardware version of touch sensor */
#define SOC_TOUCH_SENSOR_NUM (15) /*!<15 Touch channels */
#define SOC_TOUCH_PROXIMITY_CHANNEL_NUM (3) /*!<Support touch proximity channel number. */
#define SOC_TOUCH_SAMPLER_NUM (1U) /*!< The sampler number in total, each sampler can be used to sample on one frequency */
/*-------------------------- TWAI CAPS ---------------------------------------*/
#define SOC_TWAI_CONTROLLER_NUM 1UL
#define SOC_TWAI_CLK_SUPPORT_APB 1
#define SOC_TWAI_BRP_MIN 2
#define SOC_TWAI_BRP_MAX 32768
#define SOC_TWAI_SUPPORTS_RX_STATUS 1
/*-------------------------- UART CAPS ---------------------------------------*/
// ESP32-S2 has 2 UART.
#define SOC_UART_NUM (2)
#define SOC_UART_HP_NUM (2)
#define SOC_UART_SUPPORT_WAKEUP_INT (1) /*!< Support UART wakeup interrupt */
#define SOC_UART_SUPPORT_APB_CLK (1) /*!< Support APB as the clock source */
#define SOC_UART_SUPPORT_REF_TICK (1) /*!< Support REF_TICK as the clock source */
#define SOC_UART_FIFO_LEN (128) /*!< The UART hardware FIFO length */
#define SOC_UART_BITRATE_MAX (5000000) /*!< Max bit rate supported by UART */
/*-------------------------- SPIRAM CAPS -------------------------------------*/
#define SOC_SPIRAM_SUPPORTED 1
#define SOC_SPIRAM_XIP_SUPPORTED 1
/*-------------------------- USB CAPS ----------------------------------------*/
#define SOC_USB_OTG_PERIPH_NUM (1U)
/*--------------------------- SHA CAPS ---------------------------------------*/
/* Max amount of bytes in a single DMA operation is 4095,
for SHA this means that the biggest safe amount of bytes is
31 blocks of 128 bytes = 3968
*/
#define SOC_SHA_DMA_MAX_BUFFER_SIZE (3968)
#define SOC_SHA_SUPPORT_DMA (1)
/* The SHA engine is able to resume hashing from a user supplied context */
#define SOC_SHA_SUPPORT_RESUME (1)
/* Has "crypto DMA", which is shared with AES */
#define SOC_SHA_CRYPTO_DMA (1)
/* Supported HW algorithms */
#define SOC_SHA_SUPPORT_SHA1 (1)
#define SOC_SHA_SUPPORT_SHA224 (1)
#define SOC_SHA_SUPPORT_SHA256 (1)
#define SOC_SHA_SUPPORT_SHA384 (1)
#define SOC_SHA_SUPPORT_SHA512 (1)
#define SOC_SHA_SUPPORT_SHA512_224 (1)
#define SOC_SHA_SUPPORT_SHA512_256 (1)
#define SOC_SHA_SUPPORT_SHA512_T (1)
/*--------------------------- MPI CAPS ---------------------------------------*/
#define SOC_MPI_MEM_BLOCKS_NUM (4)
#define SOC_MPI_OPERATIONS_NUM (3)
/*--------------------------- RSA CAPS ---------------------------------------*/
#define SOC_RSA_MAX_BIT_LEN (4096)
/*-------------------------- AES CAPS -----------------------------------------*/
#define SOC_AES_SUPPORT_DMA (1)
#define SOC_AES_SUPPORT_GCM (1)
/*-------------------------- eFuse CAPS----------------------------*/
#define SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1
#define SOC_EFUSE_DIS_DOWNLOAD_DCACHE 1
#define SOC_EFUSE_HARD_DIS_JTAG 1
#define SOC_EFUSE_SOFT_DIS_JTAG 1
#define SOC_EFUSE_DIS_BOOT_REMAP 1
#define SOC_EFUSE_DIS_LEGACY_SPI_BOOT 1
#define SOC_EFUSE_DIS_ICACHE 1
/*-------------------------- Secure Boot CAPS----------------------------*/
#define SOC_SECURE_BOOT_V2_RSA 1
#define SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3
#define SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1
#define SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1
/*-------------------------- Flash Encryption CAPS----------------------------*/
#define SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX (64)
#define SOC_FLASH_ENCRYPTION_XTS_AES 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_128 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_256 1
/*-------------------------- MEMPROT CAPS ------------------------------------*/
#define SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE 16
#define SOC_MEMPROT_MEM_ALIGN_SIZE 4
/* Has "crypto DMA", which is shared with SHA */
#define SOC_AES_CRYPTO_DMA (1)
#define SOC_AES_SUPPORT_AES_128 (1)
#define SOC_AES_SUPPORT_AES_192 (1)
#define SOC_AES_SUPPORT_AES_256 (1)
/*--------------- PHY REGISTER AND MEMORY SIZE CAPS --------------------------*/
#define SOC_PHY_DIG_REGS_MEM_SIZE (21*4)
/*--------------- WIFI LIGHT SLEEP CLOCK WIDTH CAPS --------------------------*/
#define SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH (12)
/*-------------------------- SPI MEM CAPS ---------------------------------------*/
#define SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE (1)
#define SOC_SPI_MEM_SUPPORT_SW_SUSPEND (1)
#define SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE (1)
#define SOC_SPI_MEM_SUPPORT_WRAP (1)
/*-------------------------- Power Management CAPS ---------------------------*/
#define SOC_PM_SUPPORT_EXT0_WAKEUP (1)
#define SOC_PM_SUPPORT_EXT1_WAKEUP (1)
#define SOC_PM_SUPPORT_EXT_WAKEUP (1) /*!<Compatible to the old version of IDF */
#define SOC_PM_SUPPORT_WIFI_WAKEUP (1)
#define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP (1) /*!<Supports waking up from touch pad trigger */
#define SOC_PM_SUPPORT_WIFI_PD (1)
#define SOC_PM_SUPPORT_RTC_PERIPH_PD (1)
#define SOC_PM_SUPPORT_RTC_FAST_MEM_PD (1)
#define SOC_PM_SUPPORT_RTC_SLOW_MEM_PD (1)
#define SOC_PM_SUPPORT_RC_FAST_PD (1)
#define SOC_PM_SUPPORT_VDDSDIO_PD (1)
#define SOC_CONFIGURABLE_VDDSDIO_SUPPORTED (1)
/*-------------------------- CLOCK SUBSYSTEM CAPS ----------------------------------------*/
#define SOC_CLK_APLL_SUPPORTED (1)
#define SOC_CLK_RC_FAST_D256_SUPPORTED (1)
#define SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 (1)
#define SOC_CLK_RC_FAST_SUPPORT_CALIBRATION (1)
#define SOC_CLK_XTAL32K_SUPPORTED (1) /*!< Support to connect an external low frequency crystal */
/*-------------------------- COEXISTENCE HARDWARE PTI CAPS -------------------------------*/
#define SOC_COEX_HW_PTI (1)
/* ---------------------------- Compatibility ------------------------------- */
// No contents
/*-------------------------- EXTERNAL COEXISTENCE CAPS -------------------------------------*/
#define SOC_EXTERNAL_COEX_ADVANCE (0) /*!< HARDWARE ADVANCED EXTERNAL COEXISTENCE CAPS */
#define SOC_EXTERNAL_COEX_LEADER_TX_LINE (1) /*!< EXTERNAL COEXISTENCE TX LINE CAPS */
/*-------------------------- Temperature Sensor CAPS -------------------------------------*/
#define SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC (1)
/*------------------------------------ WI-FI CAPS ------------------------------------*/
#define SOC_WIFI_HW_TSF (1) /*!< Support hardware TSF */
#define SOC_WIFI_FTM_SUPPORT (1) /*!< Support FTM */
#define SOC_WIFI_WAPI_SUPPORT (1) /*!< Support WAPI */
#define SOC_WIFI_CSI_SUPPORT (1) /*!< Support CSI */
#define SOC_WIFI_MESH_SUPPORT (1) /*!< Support WIFI MESH */
#define SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW (1) /*!< Support delta early time for rf phy on/off */
#define SOC_WIFI_NAN_SUPPORT (1) /*!< Support WIFI Aware (NAN) */
/*-------------------------- ULP CAPS ----------------------------------------*/
#define SOC_ULP_HAS_ADC (1) /* ADC can be accessed from ULP */
/*------------------------------------- PHY CAPS -------------------------------------*/
#define SOC_PHY_COMBO_MODULE (0) /*!< Only support Wi-Fi*/
Reference in New Issue View Git Blame Copy Permalink