esp-idf/components/driver/deprecated/driver/dac.h
morris c0289ee6eb fix(drivers): fix typos found by codespell
codespell components/esp_driver*
2024-03-28 10:01:27 +08:00

172 lines
3.8 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include "esp_err.h"
#include "sdkconfig.h"
#include "driver/gpio.h"
#include "driver/dac_types_legacy.h"
#if !CONFIG_DAC_SUPPRESS_DEPRECATE_WARN
#warning "The legacy DAC driver is deprecated, please use `driver/dac_oneshot.h`, `driver/dac_cosine.h` or `driver/dac_continuous.h` instead"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Get the GPIO number of a specific DAC channel.
*
* @param channel Channel to get the gpio number
* @param gpio_num output buffer to hold the gpio number
* @return
* - ESP_OK if success
*/
esp_err_t dac_pad_get_io_num(dac_channel_t channel, gpio_num_t *gpio_num);
/**
* @brief Set DAC output voltage.
* DAC output is 8-bit. Maximum (255) corresponds to VDD3P3_RTC.
*
* @note Need to configure DAC pad before calling this function.
* DAC channel 0 is attached to GPIO25, DAC channel 1 is attached to GPIO26
* @param channel DAC channel
* @param dac_value DAC output value
*
* @return
* - ESP_OK success
*/
esp_err_t dac_output_voltage(dac_channel_t channel, uint8_t dac_value);
/**
* @brief DAC pad output enable
*
* @param channel DAC channel
* @note DAC channel 0 is attached to GPIO25, DAC channel 1 is attached to GPIO26
* I2S left channel will be mapped to DAC channel 1
* I2S right channel will be mapped to DAC channel 0
*/
esp_err_t dac_output_enable(dac_channel_t channel);
/**
* @brief DAC pad output disable
*
* @param channel DAC channel
* @note DAC channel 0 is attached to GPIO25, DAC channel 1 is attached to GPIO26
* @return
* - ESP_OK success
*/
esp_err_t dac_output_disable(dac_channel_t channel);
/**
* @brief Enable cosine wave generator output.
*
* @return
* - ESP_OK success
*/
esp_err_t dac_cw_generator_enable(void);
/**
* @brief Disable cosine wave generator output.
*
* @return
* - ESP_OK success
*/
esp_err_t dac_cw_generator_disable(void);
/**
* @brief Config the cosine wave generator function in DAC module.
*
* @param cw Configuration.
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG The parameter is NULL.
*/
esp_err_t dac_cw_generator_config(dac_cw_config_t *cw);
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
#if CONFIG_IDF_TARGET_ESP32
/**
* @brief Enable DAC output data from I2S
*
* @return
* - ESP_OK success
*/
esp_err_t dac_i2s_enable(void);
/**
* @brief Disable DAC output data from I2S
*
* @return
* - ESP_OK success
*/
esp_err_t dac_i2s_disable(void);
#endif // CONFIG_IDF_TARGET_ESP32
#if CONFIG_IDF_TARGET_ESP32S2
/**
* @brief DAC digital controller initialization.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_init(void);
/**
* @brief DAC digital controller deinitialization.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_deinit(void);
/**
* @brief Setting the DAC digital controller.
*
* @param cfg Pointer to digital controller parameter. See ``dac_digi_config_t``.
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t dac_digi_controller_config(const dac_digi_config_t *cfg);
/**
* @brief DAC digital controller start output voltage.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_start(void);
/**
* @brief DAC digital controller stop output voltage.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_stop(void);
/**
* @brief Reset DAC digital controller FIFO.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_fifo_reset(void);
/**
* @brief Reset DAC digital controller.
* @return
* - ESP_OK success
*/
esp_err_t dac_digi_reset(void);
#endif // CONFIG_IDF_TARGET_ESP32S2
#ifdef __cplusplus
}
#endif