esp-idf/components/esp32/int_wdt.c
Darian Leung 95d63137d1 bugfix/freertos_dual_core_hooks
This commit fixes bugs with the dual core changes to freeRTOS tick and idle hooks.
Interrupt watchdog now registers tick hooks to both cores.
API for cross core tick and idle hook registration were also added
2017-10-13 18:27:53 +08:00

105 lines
3.6 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include <esp_types.h>
#include "esp_err.h"
#include "esp_intr.h"
#include "esp_attr.h"
#include "esp_freertos_hooks.h"
#include "soc/timer_group_struct.h"
#include "soc/timer_group_reg.h"
#include "driver/timer.h"
#include "esp_int_wdt.h"
#if CONFIG_INT_WDT
#define WDT_INT_NUM 24
//Take care: the tick hook can also be called before esp_int_wdt_init() is called.
#if CONFIG_INT_WDT_CHECK_CPU1
//Not static; the ISR assembly checks this.
bool int_wdt_app_cpu_ticked=false;
static void IRAM_ATTR tick_hook(void) {
if (xPortGetCoreID()!=0) {
int_wdt_app_cpu_ticked=true;
} else {
//Only feed wdt if app cpu also ticked.
if (int_wdt_app_cpu_ticked) {
TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
TIMERG1.wdt_config2=CONFIG_INT_WDT_TIMEOUT_MS*2; //Set timeout before interrupt
TIMERG1.wdt_config3=CONFIG_INT_WDT_TIMEOUT_MS*4; //Set timeout before reset
TIMERG1.wdt_feed=1;
TIMERG1.wdt_wprotect=0;
int_wdt_app_cpu_ticked=false;
}
}
}
#else
static void IRAM_ATTR tick_hook(void) {
if (xPortGetCoreID()!=0) return;
TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
TIMERG1.wdt_config2=CONFIG_INT_WDT_TIMEOUT_MS*2; //Set timeout before interrupt
TIMERG1.wdt_config3=CONFIG_INT_WDT_TIMEOUT_MS*4; //Set timeout before reset
TIMERG1.wdt_feed=1;
TIMERG1.wdt_wprotect=0;
}
#endif
void esp_int_wdt_init() {
TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
TIMERG1.wdt_config0.sys_reset_length=7; //3.2uS
TIMERG1.wdt_config0.cpu_reset_length=7; //3.2uS
TIMERG1.wdt_config0.level_int_en=1;
TIMERG1.wdt_config0.stg0=TIMG_WDT_STG_SEL_INT; //1st stage timeout: interrupt
TIMERG1.wdt_config0.stg1=TIMG_WDT_STG_SEL_RESET_SYSTEM; //2nd stage timeout: reset system
TIMERG1.wdt_config1.clk_prescale=80*500; //Prescaler: wdt counts in ticks of 0.5mS
//The timer configs initially are set to 5 seconds, to make sure the CPU can start up. The tick hook sets
//it to their actual value.
TIMERG1.wdt_config2=10000;
TIMERG1.wdt_config3=10000;
TIMERG1.wdt_config0.en=1;
TIMERG1.wdt_feed=1;
TIMERG1.wdt_wprotect=0;
TIMERG1.int_clr_timers.wdt=1;
timer_group_intr_enable(TIMER_GROUP_1, TIMG_WDT_INT_ENA_M);
esp_register_freertos_tick_hook_for_cpu(tick_hook, 0);
#ifndef CONFIG_FREERTOS_UNICORE
esp_register_freertos_tick_hook_for_cpu(tick_hook, 1);
#endif
ESP_INTR_DISABLE(WDT_INT_NUM);
intr_matrix_set(xPortGetCoreID(), ETS_TG1_WDT_LEVEL_INTR_SOURCE, WDT_INT_NUM);
//We do not register a handler for the interrupt because it is interrupt level 4 which
//is not servicable from C. Instead, xtensa_vectors.S has a call to the panic handler for
//this interrupt.
ESP_INTR_ENABLE(WDT_INT_NUM);
}
#endif