mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
166 lines
10 KiB
ReStructuredText
166 lines
10 KiB
ReStructuredText
Inter-Processor Call (IPC)
|
|
==========================
|
|
|
|
:link_to_translation:`zh_CN:[中文]`
|
|
|
|
.. note::
|
|
|
|
IPC stands for an **"Inter-Processor Call"** and **NOT** "Inter-Process Communication" as found on other operating systems.
|
|
|
|
Overview
|
|
--------
|
|
|
|
Due to the dual core nature of the {IDF_TARGET_NAME}, there are some scenarios where a certain callback must be executed from a particular core such as:
|
|
|
|
- When allocating an ISR to an interrupt source of a particular core (applies to freeing a particular core's interrupt source as well)
|
|
- On particular chips (such as the ESP32), accessing memory that is exclusive to a particular core (such as RTC Fast Memory)
|
|
- Reading the registers/state of another core
|
|
|
|
The IPC (Inter-Processor Call) feature allows a particular core (the calling core) to trigger the execution of a callback function on another core (the target core). The IPC feature allows execution of a callback function on the target core in either a task context, or an interrupt context. Depending on the context that the callback function is executed in, different restrictions apply to the implementation of the callback function.
|
|
|
|
IPC in Task Context
|
|
-------------------
|
|
|
|
The IPC feature implements callback execution in a task context by creating an IPC task for each core during application startup. When the calling core needs to execute a callback on the target core, the callback will execute in the context of the target core's IPC task.
|
|
|
|
When using IPCs in a task context, users need to consider the following:
|
|
|
|
- IPC callbacks should ideally be simple and short. An IPC callback **must never block or yield**.
|
|
- The IPC tasks are created at the highest possible priority (i.e., ``configMAX_PRIORITIES - 1``).
|
|
|
|
- If :ref:`CONFIG_ESP_IPC_USES_CALLERS_PRIORITY` is enabled, the target core's IPC task will be lowered to the current priority of the target core before executing the callback.
|
|
- If :ref:`CONFIG_ESP_IPC_USES_CALLERS_PRIORITY` is disabled, the target core will always execute the callback at the highest possible priority.
|
|
|
|
- Depending on the complexity of the callback, users may need to configure the stack size of the IPC task via :ref:`CONFIG_ESP_IPC_TASK_STACK_SIZE`.
|
|
- The IPC feature is internally protected by a mutex. Therefore, simultaneous IPC calls from two or more calling core's are serialized on a first come first serve basis.
|
|
|
|
API Usage
|
|
^^^^^^^^^
|
|
|
|
Task Context IPC callbacks have the following restrictions:
|
|
|
|
- The callback must be of the :cpp:type:`esp_ipc_func_t` type.
|
|
- The callback **must never block or yield** as this will result in the target core's IPC task blocking or yielding.
|
|
- The callback must avoid changing any aspect of the IPC task's state, e.g., by calling ``vTaskPrioritySet(NULL, x)``.
|
|
|
|
The IPC feature offers the API listed below to execute a callback in a task context on a target core. The API allows the calling core to block until the callback's execution has completed, or return immediately once the callback's execution has started.
|
|
|
|
- :cpp:func:`esp_ipc_call` triggers an IPC call on the target core. This function will block until the target core's IPC task **begins** execution of the callback.
|
|
- :cpp:func:`esp_ipc_call_blocking` triggers an IPC on the target core. This function will block until the target core's IPC task **completes** execution of the callback.
|
|
|
|
IPC in Interrupt Context
|
|
------------------------
|
|
|
|
In some cases, we need to quickly obtain the state of another core such as in a core dump, GDB stub, various unit tests, and hardware errata workarounds. The IPC ISR feature implements callback execution from a High Priority Interrupt context by reserving a High Priority Interrupt on each core for IPC usage. When a calling core needs to execute a callback on the target core, the callback will execute in the context of the High Priority Interrupt of the target core.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
|
|
For such scenarios, the IPC ISR feature supports execution of callbacks in a :doc:`High Priority Interrupt </api-guides/hlinterrupts>` context.
|
|
|
|
When using IPCs in High Priority Interrupt context, users need to consider the following:
|
|
|
|
.. list::
|
|
|
|
:CONFIG_IDF_TARGET_ARCH_XTENSA: - Since the callback is executed in a High Priority Interrupt context, the callback must be written entirely in assembly. See the API Usage below for more details regarding writing assembly callbacks.
|
|
- The priority of the reserved High Priority Interrupt is dependent on the :ref:`CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL` option.
|
|
|
|
When the callback executes, users need to consider the following:
|
|
|
|
.. list::
|
|
|
|
- The calling core will disable interrupts of priority level 3 and lower.
|
|
:CONFIG_IDF_TARGET_ARCH_XTENSA: - Although the priority of the reserved interrupt depends on :ref:`CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL`, during the execution of IPC ISR callback, the target core will disable interrupts of priority level 5 and lower regardless of what :ref:`CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL` is set to.
|
|
:CONFIG_IDF_TARGET_ARCH_RISCV: - Although the priority of the reserved interrupt depends on :ref:`CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL`, during the execution of IPC ISR callback, the target core will disable all interrupts.
|
|
|
|
API Usage
|
|
^^^^^^^^^
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
|
|
High Priority Interrupt IPC callbacks have the following restrictions:
|
|
|
|
- The callback must be of type :cpp:type:`esp_ipc_isr_func_t` but implemented entirely in assembly.
|
|
- The callback is invoked via the ``CALLX0`` instruction with register windowing disabled, thus the callback:
|
|
- must not call any register window related instructions, e.g., ``entry`` and ``retw``.
|
|
- must not call other C functions as register windowing is disabled.
|
|
- The callback should be placed in IRAM at a 4-byte aligned address.
|
|
- On invocation of, or after returning from the callback, the registers ``a2, a3, a4`` are saved/restored automatically, thus can be used in the callback. The callback should **ONLY** use those registers.
|
|
- ``a2`` contains the ``void *arg`` of the callback.
|
|
- ``a3/a4`` are free to use as scratch registers.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_RISCV
|
|
|
|
High Priority Interrupt IPC callbacks must be of type :cpp:type:`esp_ipc_isr_func_t` and have the same restrictions as for regular interrupt handlers. The callback function can be written in C.
|
|
|
|
The IPC feature offers the API listed below to execute a callback in a High Priority Interrupt context:
|
|
|
|
- :cpp:func:`esp_ipc_isr_call` triggers an IPC call on the target core. This function will busy-wait until the target core **begins** execution of the callback.
|
|
- :cpp:func:`esp_ipc_isr_call_blocking` triggers an IPC call on the target core. This function will busy-wait until the target core **completes** execution of the callback.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
|
|
The following code-blocks demonstrates a High Priority Interrupt IPC callback written in assembly that simply reads the target core's cycle count:
|
|
|
|
.. code-block:: asm
|
|
|
|
/* esp_test_ipc_isr_get_cycle_count_other_cpu(void *arg) */
|
|
// this function reads CCOUNT of the target core and stores it in arg.
|
|
// use only a2, a3 and a4 regs here.
|
|
.section .iram1, "ax"
|
|
.align 4
|
|
.global esp_test_ipc_isr_get_cycle_count_other_cpu
|
|
.type esp_test_ipc_isr_get_cycle_count_other_cpu, @function
|
|
// Args:
|
|
// a2 - void* arg
|
|
esp_test_ipc_isr_get_cycle_count_other_cpu:
|
|
rsr.ccount a3
|
|
s32i a3, a2, 0
|
|
ret
|
|
|
|
.. code-block:: c
|
|
|
|
unit32_t cycle_count;
|
|
esp_ipc_isr_call_blocking(esp_test_ipc_isr_get_cycle_count_other_cpu, (void *)cycle_count);
|
|
|
|
.. note::
|
|
|
|
The number of scratch registers available for use is sufficient for most simple use cases. But if your callback requires more scratch registers, ``void *arg`` can point to a buffer that is used as a register save area. The callback can then save and restore more registers. See the :example:`system/ipc/ipc_isr`.
|
|
|
|
.. note::
|
|
|
|
For more examples of High Priority Interrupt IPC callbacks, you can refer to :idf_file:`components/esp_system/port/arch/xtensa/esp_ipc_isr_routines.S` and :idf_file:`components/esp_system/test_apps/esp_system_unity_tests/main/port/arch/xtensa/test_ipc_isr.S`.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_RISCV
|
|
|
|
See :idf_file:`examples/system/ipc/ipc_isr/riscv/main/main.c` for an example of its use.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
|
|
See :idf_file:`examples/system/ipc/ipc_isr/xtensa/main/main.c` for an example of its use.
|
|
|
|
The High Priority Interrupt IPC API also provides the following convenience functions that can stall/resume the target core. These APIs utilize the High Priority Interrupt IPC, but supply their own internal callbacks:
|
|
|
|
.. list::
|
|
|
|
:CONFIG_IDF_TARGET_ARCH_RISCV: - :cpp:func:`esp_ipc_isr_stall_other_cpu` stalls the target core. The calling core disables interrupts of level 3 and lower, while the target core will busy-wait with all interrupts disabled. The target core will busy-wait until :cpp:func:`esp_ipc_isr_release_other_cpu` is called.
|
|
:CONFIG_IDF_TARGET_ARCH_XTENSA: - :cpp:func:`esp_ipc_isr_stall_other_cpu` stalls the target core. The calling core disables interrupts of level 3 and lower while the target core will busy-wait with interrupts of level 5 and lower disabled. The target core will busy-wait until :cpp:func:`esp_ipc_isr_release_other_cpu` is called.
|
|
- :cpp:func:`esp_ipc_isr_release_other_cpu` resumes the target core.
|
|
|
|
Application Examples
|
|
--------------------
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
|
|
- :example:`system/ipc/ipc_isr/xtensa` demonstrates how to use the IPC ISR feature to run an IPC in the context of a High Priority Interrupt, allowing users to quickly get the state of the other CPU, with two assembly callbacks that return the PS register of the other core and save/restore registers while performing tasks based on input arguments.
|
|
|
|
.. only:: CONFIG_IDF_TARGET_ARCH_RISCV
|
|
|
|
- :example:`system/ipc/ipc_isr/riscv` demonstrates how to use the IPC ISR feature on {IDF_TARGET_NAME} to run an IPC in the context of a High Priority Interrupt, including how to quickly get the state of the other CPU and how to return multiple values from the callback function.
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. include-build-file:: inc/esp_ipc.inc
|
|
|
|
.. include-build-file:: inc/esp_ipc_isr.inc
|