mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
118 lines
4.1 KiB
Makefile
118 lines
4.1 KiB
Makefile
#
|
|
# Bootloader component
|
|
#
|
|
# The bootloader is not a real component that gets linked into the project.
|
|
# Instead it is an entire standalone project ( in src/) that gets built in
|
|
# the upper projects build directory. This Makefile.projbuild provides the
|
|
# glue to build the bootloader project from the original project. It
|
|
# basically runs Make in the src/ directory but it needs to zero some variables
|
|
# the ESP-IDF project.mk makefile exports first, to not let them interfere.
|
|
#
|
|
ifndef IS_BOOTLOADER_BUILD
|
|
|
|
BOOTLOADER_COMPONENT_PATH := $(COMPONENT_PATH)
|
|
BOOTLOADER_BUILD_DIR=$(abspath $(BUILD_DIR_BASE)/bootloader)
|
|
BOOTLOADER_BIN=$(BOOTLOADER_BUILD_DIR)/bootloader.bin
|
|
|
|
# signing key path is resolved relative to the project directory
|
|
SECURE_BOOT_SIGNING_KEY=$(abspath $(call dequote,$(CONFIG_SECURE_BOOT_SIGNING_KEY)))
|
|
export SECURE_BOOT_SIGNING_KEY # used by bootloader_support component
|
|
|
|
# Has a matching value in bootloader_support esp_flash_partitions.h
|
|
BOOTLOADER_OFFSET := 0x1000
|
|
|
|
# Custom recursive make for bootloader sub-project
|
|
BOOTLOADER_MAKE=+$(MAKE) -C $(BOOTLOADER_COMPONENT_PATH)/src \
|
|
V=$(V) BUILD_DIR_BASE=$(BOOTLOADER_BUILD_DIR) TEST_COMPONENTS=
|
|
|
|
.PHONY: bootloader-clean bootloader-flash bootloader $(BOOTLOADER_BIN)
|
|
|
|
$(BOOTLOADER_BIN): $(SDKCONFIG_MAKEFILE)
|
|
$(BOOTLOADER_MAKE) $@
|
|
|
|
clean: bootloader-clean
|
|
|
|
ifndef CONFIG_SECURE_BOOT_ENABLED
|
|
# If secure boot disabled, bootloader flashing is integrated
|
|
# with 'make flash' and no warnings are printed.
|
|
|
|
bootloader: $(BOOTLOADER_BIN)
|
|
@echo $(SEPARATOR)
|
|
@echo "Bootloader built. Default flash command is:"
|
|
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $^"
|
|
|
|
ESPTOOL_ALL_FLASH_ARGS += $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)
|
|
|
|
bootloader-flash: $(BOOTLOADER_BIN)
|
|
$(ESPTOOLPY_WRITE_FLASH) 0x1000 $^
|
|
|
|
else ifdef CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
|
|
# One time flashing requires user to run esptool.py command themselves,
|
|
# and warning is printed about inability to reflash.
|
|
|
|
bootloader: $(BOOTLOADER_BIN)
|
|
@echo $(SEPARATOR)
|
|
@echo "Bootloader built. One-time flash command is:"
|
|
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
|
|
@echo $(SEPARATOR)
|
|
@echo "* IMPORTANT: After first boot, BOOTLOADER CANNOT BE RE-FLASHED on same device"
|
|
|
|
else ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
|
|
# Reflashable secure bootloader
|
|
# generates a digest binary (bootloader + digest)
|
|
|
|
BOOTLOADER_DIGEST_BIN := $(BOOTLOADER_BUILD_DIR)/bootloader-reflash-digest.bin
|
|
SECURE_BOOTLOADER_KEY := $(BOOTLOADER_BUILD_DIR)/secure-bootloader-key.bin
|
|
|
|
ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
$(SECURE_BOOTLOADER_KEY): $(SECURE_BOOT_SIGNING_KEY)
|
|
$(ESPSECUREPY) digest_private_key -k $< $@
|
|
else
|
|
$(SECURE_BOOTLOADER_KEY):
|
|
@echo "No pre-generated key for a reflashable secure bootloader is available, due to signing configuration."
|
|
@echo "To generate one, you can use this command:"
|
|
@echo "espsecure.py generate_flash_encryption_key $@"
|
|
@echo "then re-run make."
|
|
exit 1
|
|
endif
|
|
|
|
bootloader: $(BOOTLOADER_DIGEST_BIN)
|
|
@echo $(SEPARATOR)
|
|
@echo "Bootloader built and secure digest generated. First time flash command is:"
|
|
@echo "$(ESPEFUSEPY) burn_key secure_boot $(SECURE_BOOTLOADER_KEY)"
|
|
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
|
|
@echo $(SEPARATOR)
|
|
@echo "To reflash the bootloader after initial flash:"
|
|
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x0 $(BOOTLOADER_DIGEST_BIN)"
|
|
@echo $(SEPARATOR)
|
|
@echo "* After first boot, only re-flashes of this kind (with same key) will be accepted."
|
|
@echo "* Not recommended to re-use the same secure boot keyfile on multiple production devices."
|
|
|
|
$(BOOTLOADER_DIGEST_BIN): $(BOOTLOADER_BIN) $(SECURE_BOOTLOADER_KEY)
|
|
@echo "DIGEST $(notdir $@)"
|
|
$(Q) $(ESPSECUREPY) digest_secure_bootloader -k $(SECURE_BOOTLOADER_KEY) -o $@ $<
|
|
|
|
else
|
|
bootloader:
|
|
@echo "Invalid bootloader target: bad sdkconfig?"
|
|
@exit 1
|
|
endif
|
|
|
|
ifndef CONFIG_SECURE_BOOT_ENABLED
|
|
# don't build bootloader by default is secure boot is enabled
|
|
all_binaries: $(BOOTLOADER_BIN)
|
|
endif
|
|
|
|
bootloader-clean:
|
|
$(BOOTLOADER_MAKE) app-clean
|
|
rm -f $(SECURE_BOOTLOADER_KEY) $(BOOTLOADER_DIGEST_BIN)
|
|
|
|
$(BOOTLOADER_BUILD_DIR):
|
|
mkdir -p $@
|
|
|
|
else
|
|
CFLAGS += -D BOOTLOADER_BUILD=1 -I $(IDF_PATH)/components/esp32/include
|
|
|
|
endif
|