esp-idf/components/idf_test/integration_test/TC_IT_MESH_EST.yml
2019-08-16 09:15:31 +00:00

4731 lines
150 KiB
YAML

.MESH_CASE: &MESH_CASE
SDK: ESP32_IDF
Test App: SSC_MESH
auto test: 'Yes'
category: Function
test point 1: self organized function
initial condition: MESH_DEINIT_STA
test environment: SSC_T50_MESH1
execution time: 0.0
module: Mesh
sub module: Establish
version: v1 (2018-08-15)
CI ready: 'No'
level: Integration
allow fail: ''
.mesh_init_all_duts: &mesh_init_all_duts
LIST_MERGE:
- - 'MSSC SSC[1-<node_num>] mesh -I'
- ['P SSC[1-<node_num>] C +MESH:INIT,OK']
.mesh_start_all_duts: &mesh_start_all_duts
LIST_MERGE:
- - 'MSSC SSC[1-<node_num>] mesh -T'
- ['P SSC[1-<node_num>] C +MESH:START,OK']
.mesh_config_all_duts: &mesh_config_all_duts
LIST_MERGE:
- - 'MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
- ['P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK']
- - 'MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>'
- ['P SSC[1-<node_num>] C +MESHSET:CFG,OK']
- - 'MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>'
- ['P SSC[1-<node_num>] C +MESHSET:MLAYER,OK']
- - 'MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
- ['P SSC[1-<node_num>] C +MESHSET:SWITCH,OK']
- - 'MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>'
- ['P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
- - 'MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>'
- ['P SSC[1-<node_num>] C +MESHSET:ASSOC,OK']
.mesh_config_all_duts_no_router: &mesh_config_all_duts_no_router
LIST_MERGE:
- - 'SSC SSC1 meshset -T -o 0 -t 1'
- ['P SSC1 C +MESHSET:TYPE,OK']
- - 'MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1'
- ['P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK']
- - 'MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
- ['P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK']
- - 'SSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>'
- ['P SSC[1-<node_num>] C +MESHSET:CFG,OK']
- - 'MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>'
- ['P SSC[1-<node_num>] C +MESHSET:MLAYER,OK']
- - 'MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
- ['P SSC[1-<node_num>] C +MESHSET:SWITCH,OK']
- - 'MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>'
- ['P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
- - 'MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>'
- ['P SSC[1-<node_num>] C +MESHSET:ASSOC,OK']
.mesh_config_dut1: &mesh_config_dut1
LIST_MERGE:
- - 'SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
- ['P SSC1 C +MESHSET:MAP_AUTH,OK']
- - 'SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>'
- ['P SSC1 C +MESHSET:CFG,OK']
- - 'SSC SSC meshset -L -o 0 -l <max_layer>'
- ['P SSC1 C +MESHSET:MLAYER,OK']
- - 'SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
- ['P SSC1 C +MESHSET:SWITCH,OK']
- - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
- - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
- ['P SSC1 C +MESHSET:ALLOW_ROOTS,OK']
- - 'SSC SSC1 meshset -J -o 0 -t <assoc_expire>'
- ['P SSC1 C +MESHSET:ASSOC,OK']
.mesh_config_dut1_no_router: &mesh_config_dut1_no_router
LIST_MERGE:
- - 'SSC SSC1 meshset -T -o 0 -t 1'
- ['P SSC1 C +MESHSET:TYPE,OK']
- - 'SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
- ['P SSC1 C +MESHSET:MAP_AUTH,OK']
- - 'SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>'
- ['P SSC1 C +MESHSET:CFG,OK']
- - 'SSC SSC1 meshset -L -o 0 -l <max_layer>'
- ['P SSC1 C +MESHSET:MLAYER,OK']
- - 'SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
- ['P SSC1 C +MESHSET:SWITCH,OK']
- - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
- - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
- ['P SSC1 C +MESHSET:ALLOW_ROOTS,OK']
- - 'SSC SSC1 meshset -J -o 0 -t <assoc_expire>'
- ['P SSC1 C +MESHSET:ASSOC,OK']
.mesh_config_cs_duts: &mesh_config_cs_duts
LIST_MERGE:
- - 'MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
- ['P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK']
- - 'MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n <try_channel> -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>'
- ['P SSC[4-<node_num>] C +MESHSET:CFG,OK']
- - 'MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>'
- ['P SSC[4-<node_num>] C +MESHSET:MLAYER,OK']
- - 'MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
- ['P SSC[4-<node_num>] C +MESHSET:SWITCH,OK']
- - 'MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>'
- ['P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
- - 'MSSC SSC[4-<node_num>] meshset -J -o 0 -t 15'
- ['P SSC[4-<node_num>] C +MESHSET:ASSOC,OK']
.mesh_check_tree_num: &mesh_check_tree_num
LIST_MERGE:
- - 'MSSC SSC[1-<node_num>] mesh -Q -o 2'
- ['P SSC[1-<node_num>] T topo']
- - 'MESHTREE'
- ['R PC_COM RE "MESHTREE:%%s"%%(<tree_node_num>)']
.mesh_tree_stably: &mesh_tree_stably
LIST_MERGE:
- - 'SSC MNODE(0) mesh -Q -o 1 -t <stable_check_time>'
- ['R MNODE(0) C MESH_STABLE_CHECK:PASS']
.est_performance_cmd_set: &est_performance_cmd_set
LIST_MERGE:
- - 'test_counts = 15'
- ['']
- - 'start_number_list = [0]'
- ['']
- - 'ie_encrypt = True'
- ['']
- - 'establish_fail_time = 1200'
- ['']
- - 'assoc_time = 20'
- ['']
- - 'stable_time = 120'
- ['']
- - 'map_encrypt = True'
- ['']
- - 'destroy_mode = "deinit"'
- ['']
test cases:
- ID: MESH_EST_0101
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n 15 -t <max_connect>
- - R SSC1 C +MESHSET:CFG,FAIL
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n <router_channel> -t 11
- - R SSC1 C +MESHSET:CFG,FAIL
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n <router_channel> -t 0
- - R SSC1 C +MESHSET:CFG,FAIL
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect>
- - R SSC1 C +MESHSET:CFG,FAIL
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 meshset -G -o 1
- - P SSC1 RE "MESH_ID,%%s"%%(<mesh_id>)
- P SSC1 C +MESHGET:CFG,OK
expected result: |-
1. fail
2. fail
3. fail
4. fail
5. succeed
steps: |-
1. mesh init
2. set config with channel 15
3. set config with max_connection 0 / 11
4. set config without router ssid
5. set/get valid config
test environment: SSC_T1_MESH1
summary: mesh set/get config before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0102
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -S -o 0 -t 0
- - P SSC1 C +MESHSET:SCAN_TIME,FAIL
- - SSC SSC1 meshset -S -o 0 -t 2000
- - P SSC1 C +MESHSET:SCAN_TIME,FAIL
- - SSC SSC1 meshset -S -o 0 -t 500
- - P SSC1 C +MESHSET:SCAN_TIME,OK
- - SSC SSC1 meshset -S -o 1
- - P SSC1 C +MESHGET:SCAN_TIME,OK,500
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init
2. set invalid scan time
3. set/get valid scan time
test environment: SSC_T1_MESH1
summary: mesh set/get passive scan time before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0103
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -Q -o 0 -i 15
- - P SSC1 C +MESHSET:QSIZE,FAIL
- - SSC SSC1 meshset -Q -o 0 -i 40
- - P SSC1 C +MESHSET:QSIZE,OK
- - SSC SSC1 meshset -Q -o 1
- - P SSC1 C +MESHGET:QSIZE,OK,40
expected result: |-
1. succeed
2. fail
3. succeed
steps: |-
1. mesh init
2. set invalid qsize
3. set/get valid qsize
test environment: SSC_T1_MESH1
summary: mesh set/get qsize before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0104
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -P -o 0 -n 0
- - P SSC1 C +MESHSET:PERCENT,FAIL
- - SSC SSC1 meshset -P -o 0 -n 110
- - P SSC1 C +MESHSET:PERCENT,FAIL
- - SSC SSC1 meshset -P -o 0 -n 100
- - P SSC1 C +MESHSET:PERCENT,OK
- - SSC SSC1 meshset -P -o 1
- - P SSC1 C +MESHGET:PERCENT,OK,1
expected result: |-
1. succeed
2. fail
3. succeed
steps: |-
1. mesh init
2. set invalid vote percentage
3. set/get valid vote percentage
test environment: SSC_T1_MESH1
summary: mesh set/get vote percentage before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0105
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
# - - SSC SSC1 meshset -Z -x 1 -o 0 -t 300 -l 3000
# - - P SSC1 C +MESHSET:ANNOUNCE,FAIL
# - - SSC SSC1 meshset -Z -x 1 -o 0 -t 500 -l 1000
# - - P SSC1 C +MESHSET:ANNOUNCE,FAIL
- - SSC SSC1 meshset -Z -x 1 -o 0 -t 500 -l 3000
- - P SSC1 C +MESHSET:ANNOUNCE,OK
- - SSC SSC1 meshset -Z -x 1 -o 1
- - P SSC1 C +MESHGET:ANNOUNCE,OK,500,3000
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init
2. set invalid announce interval
3. set/get valid announce interval
test environment: SSC_T1_MESH1
summary: mesh set/get announce interval before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0106
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -J -o 0 -t 9
- - P SSC1 C +MESHSET:ASSOC,FAIL
- - SSC SSC1 meshset -J -o 0 -t 10
- - P SSC1 C +MESHSET:ASSOC,OK
- - SSC SSC1 meshset -J -o 1
- - P SSC1 C +MESHGET:ASSOC,OK,10
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init
2. set invalid assoc expire
3. set/get valid assoc expire
test environment: SSC_T1_MESH1
summary: mesh set/get assoc expire before mesh start
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0107 #TODO: support max_layer>127
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -L -o 0 -l 0
- - P SSC1 C +MESHSET:MLAYER,FAIL
- - SSC SSC1 meshset -L -o 0 -l -1
- - P SSC1 C +MESHSET:MLAYER,FAIL
- - SSC SSC1 meshset -L -o 0 -l 65537
- - P SSC1 C +MESHSET:MLAYER,FAIL
# - - SSC SSC1 meshset -L -o 0 -l 26
# - - P SSC1 C +MESHSET:MLAYER,FAIL
- - SSC SSC1 meshset -L -o 0 -l 1
- - P SSC1 C +MESHSET:MLAYER,OK
- - SSC SSC1 meshset -L -o 1
- - P SSC1 C +MESHGET:MLAYER,OK,1
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init
2. set invalid max_layer
3. set/get valid max_layer
test environment: SSC_T1_MESH1
summary: mesh set/get max_lay test
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0108 #TODO: map_password can only be set in esp_mesh_set_config
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC1 C +MESHSET:MAP_AUTH,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 meshset -o 0 -L -l 2
- - P SSC1 C +MESHSET:MLAYER,OK
- - SSC SSC1 meshset -P -o 0 -n 60
- - P SSC1 C +MESHSET:PERCENT,OK
- - SSC SSC1 meshset -o 0 -J -t 20
- - P SSC1 C +MESHSET:ASSOC,OK
- - SSC SSC1 meshset -o 0 -K -i 1
- - P SSC1 C +MESHSET:ALLOW_ROOTS,OK
- - SSC SSC1 meshset -S -o 0 -t 500
- - P SSC1 C +MESHSET:SCAN_TIME,OK
- - SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC1 C +MESHSET:SWITCH,OK
- - SSC SSC1 meshset -H -o 0 -t <threshold_high> -i <threshold_medium> -l <threshold_low>
- - P SSC1 C +MESHSET:THRESHOLD,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init
2. set invalid max_layer
3. set/get valid max_layer
test environment: SSC_T1_MESH1
summary: mesh set all configurations in order
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0110
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -o 0 -L -l 1
- - P SSC[1-2] C +MESHSET:MLAYER,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 10
- - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config two duts with max_lay = 0
2. start mesh
3. check .....
test environment: SSC_T2_MESH1
summary: two duts establish mesh network with max layer = 1
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0111
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e [<map_password>,<temp_string>] -i 0
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 20
- - P PC_COM C DELAYDONE
- P SSC2 NC MESH_EVENT_CONNECTED
- P SSC1 NC MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config two duts with different map_password and ie not encrypted
2. start mesh
3. check not connected
test environment: SSC_T2_MESH1
summary: two duts establish mesh network with different map_password
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0112
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [0,1]
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 10
- - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config two duts with different ie_encrypt
2. start mesh
3. check both connected with router
test environment: SSC_T2_MESH1
summary: two duts establish mesh network with different ie_encrypt
test point 2: mesh configuration test
CI ready: 'Yes'
- ID: MESH_EST_0113
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
[<router_channel>,<wrong_channel>] -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- P SSC2 C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config two duts with different channel
2. start mesh
3. check dut1 connected and dut2 disconnected
test environment: SSC_T2_MESH1
summary: two duts establish mesh network with different channel
test point 2: mesh configuration test
CI ready: 'No'
#TODO: not work after v3.3
- ID: MESH_EST_0114
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -o 0 -L -l [2,1]
- - P SSC[1-2] C +MESHSET:MLAYER,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 60
- - ''
- - SSC SSC[1-2] mesh -Q -o 2
- - P SSC[1-2] T topo
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. config two duts with different max_layer [2,1]
2. start dut1(max_layer=2) first
3. dut1 connected with router then start dut2(max_layer=1)
4. check .....
test environment: SSC_T2_MESH1
summary: (ASSERT) two duts establish mesh network with different max_layer[2,1]
test point 2: mesh configuration test
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_0115
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] mesh -I
- - P SSC[1-3] C +MESH:INIT,OK
- - SSC SSC[1-3] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
- - P SSC[1-3] C +MESHSET:CFG,OK
- - SSC SSC[1-3] meshset -o 0 -L -l 2
- - P SSC[1-3] C +MESHSET:MLAYER,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - SSC SSC1 mesh -Q -o 3
- - ''
- - DELAY 5
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
- - SSC SSC3 mesh -T
- - P SSC3 C +MESH:START,OK
- - SSC SSC[1-3] mesh -Q -o 3
- - ''
- - DELAY 10
- - P SSC3 C MESH_EVENT_NO_PARENT_FOUND
- - DELAY 60
- - ''
- - SSC SSC[1-3] mesh -Q -o 2
- - P SSC[1-3] T topo
# TODO: check more?
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. config 3 duts with different max_layer=2 and max_connect=1
2. start dut1(max_layer=2) first
3. dut1 connected with router then start dut2(max_layer=1)
3. dut1 connected with router then start dut2(max_layer=1)
4. check .....
test environment: SSC_T3_MESH1
summary: 3 duts establish mesh network with max_connection 1 and max_layer 2
test point 2: mesh configuration test
CI ready: 'No'
- ID: MESH_EST_0201
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config
3. mesh start
4. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: dut1 establish mesh network with simple configuration
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0202
<<: *MESH_CASE
cmd set:
- ''
- - LOOP 2 6 "[2,3]"
- - ''
- - SSC SSC1 reboot
- - P SSC1 C !!!ready!!!
- - SSC SSC1 op -S -o {%d}
- - P SSC1 C +MODE:OK
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
steps: |-
1. set wifi op_mode (AP/APSTA)
2. mesh init
3. mesh config
4. mesh start
5. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: dut1 start mesh in different wifi mode (AP/APSTA)
test point 2: network establish test
CI ready: 'No'
#TODO: add case: start mesh with station connected
- ID: MESH_EST_0203 #TODO: which step call wifi scan
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 sta -S
- - P SSC1 C +SCAN_DONE:OK
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
steps: |-
1. wifi scan
2. mesh init
3. mesh config
4. mesh start
5. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: dut1 start mesh during wifi scan
test point 2: network establish test
CI ready: 'No'
- ID: MESH_EST_0204
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 sta -C -s <router_ssid> -p <router_password>
- - P SSC1 C +JAP:CONNECTED
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
steps: |-
1. connect to router
2. mesh init
3. mesh config
4. mesh start
5. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: dut1 start mesh after wifi connected with router
test point 2: network establish test
CI ready: 'Yes'
#TODO: start during connecting to router
- ID: MESH_EST_0205
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config with max_layer 1
3. mesh start
4. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: dut1 start mesh with max layer 1, establish mesh network
test point 2: network establish test
CI ready: 'No'
- ID: MESH_EST_0206
<<: *MESH_CASE
cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip>'
- - P SOC_COM L OK
- - SSC MNODE(0) mesh -S -o 0 -i <pc_ip> -t <test_tcp_port1>
- - P MNODE(0) C +CONNECT,OK
- P SOC1 C ACCEPT
- - SOC SOC1 MACCEPT GSOC1
- - P SOC_COM L OK
expected result: |-
1. succeed
2. succeed
steps: |-
1. mesh network already established
2. root connect to TCP server
initial condition: MESH_INIT1
test environment: SSC_T1_MESH2
summary: dut1 establish mesh network, then root connect to TCP server
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0207
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config
3. mesh start
4. check mesh tree established and stable
test environment: SSC_T2_MESH1
summary: two duts start mesh together to establish mesh network
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0208
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config without ie_encrypt
3. mesh start
4. check mesh tree established and stable
test environment: SSC_T2_MESH1
summary: two duts start mesh without ie_encrypt, establish mesh network
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0209
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config without map_password
3. mesh start
4. check mesh tree established and stable
test environment: SSC_T2_MESH1
summary: two duts start mesh without map_password, establish mesh network
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0210
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. start mesh on dut1
2. dut1 connected with router
3. start mesh on dut2
4. dut2 connected with dut1
test environment: SSC_T2_MESH1
summary: dut2 start mesh after dut1 connected, establish mesh network
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0211
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - DELAY 10 30
- - ''
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. start mesh on dut1
2. dut1 connected with router
3. delay some time then start mesh on dut2
4. dut2 connected with dut1
test environment: SSC_T2_MESH1
summary: dut2 start mesh after dut1 connected more than 10s, establish mesh network
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0212
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -o 0 -L -l 1
- - P SSC[1-2] C +MESHSET:MLAYER,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 60
- - ''
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config two duts with max_lay = 1
2. start mesh
3. check .....
sub module: Establish
test environment: SSC_T2_MESH1
summary: (ASSERT) 2 duts start mesh with max_layer=1, establish mesh network
test point 2: network establish test
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_0213
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-12] mesh -I
- - P SSC[1-12] C +MESH:INIT,OK
- - MSSC SSC[1-12] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 10 -e <map_password> -i <ie_encrypt>
- - P SSC[1-12] C +MESHSET:CFG,OK
- - MSSC SSC[1-12] meshset -o 0 -L -l 2
- - P SSC[1-12] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-11] mesh -T
- - P SSC[1-11] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config 11 duts with max_layer=2 and mac_connection=10
2. 11 duts start mesh
3. check mesh network establish
sub module: Establish
test environment: SSC_T12_MESH1
summary: establish special mesh_network with max_lay=2 and max_connection=10
test point 2: network establish test
CI ready: 'No'
- ID: MESH_EST_0214
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-7] mesh -I
- - P SSC[1-7] C +MESH:INIT,OK
- - MSSC SSC[1-7] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 2 -e <map_password> -i <ie_encrypt>
- - P SSC[1-7] C +MESHSET:CFG,OK
- - MSSC SSC[1-7] meshset -o 0 -L -l 3
- - P SSC[1-7] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-7] mesh -T
- - P SSC[1-7] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> 7
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config 7 duts with max_lay=3 and max_connection=2
2. 7 duts start mesh
3. check mesh network establish
sub module: Establish
test environment: SSC_T12_MESH1
summary: set max_conn=2 and max_layer=3, establish full mesh tree
test point 2: network establish test
CI ready: 'No'
# TODO: full tree, destroy and re-establish
- ID: MESH_EST_0215
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-25] mesh -I
- - P SSC[1-25] C +MESH:INIT,OK
- - MSSC SSC[1-25] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
- - P SSC[1-25] C +MESHSET:CFG,OK
- - MSSC SSC[1-25] meshset -o 0 -L -l 25
- - P SSC[1-25] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-25] mesh -T
- - P SSC[1-25] C +MESH:START,OK
- - DELAY 120
- - ''
- - VALUE <tree_node_num> 25
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config 25 duts with max_connection=1
2. 25 duts start mesh
3. check mesh network establish
test environment: SSC_T50_MESH1
summary: establish special mesh_network with max_connection=1 and max_layer=25
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0216
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config all duts with simple configuration
2. all duts start mesh
3. check mesh network establish
test environment: SSC_T50_MESH1
summary: multiple nodes establish mesh_network simple configuration
test point 2: network establish test
CI ready: 'Yes'
- ID: MESH_EST_0301
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) reboot
- - P MNODE(0) C !!!ready!!!
- P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 5
- - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot root
2. layer2 disconnected and then become new root
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, then reboot root
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0302
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) mesh -I -o 1
- - P MNODE(0,0) C MESH:DEINIT,OK
- P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. layer2 stop mesh
2. root find child leave
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, then layer2 stop mesh
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0303
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - DELAY 5
- - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 15
- - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
steps: |-
1. power reset root
2. layer2 disconnected and then become new root
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, then power reset root
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0304
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - SSC MNODE(0) op -S -o 2
- - P MNODE(0) C +MODE:OK
- P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 15
- - P MNODE(0,0) C MESH_EVENT_CONNECTED,1
expected result: |-
1. succeed
2. succeed
steps: |-
1. power reset root and
2. layer2 disconnected and then become new root
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, power reset root and switch to softAP mode
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0305
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -V -o 2
- - P MNODE(0) C MESH:SAVE,OK
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - SSC MNODE(0) mesh -T -o 2
- - P MNODE(0) C MESH:START,OK
- - DELAY 10
- - P MNODE(0) C MESH_EVENT_CONNECTED,1
- P MNODE(0,0) C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
2. succeed
steps: |-
1. root set auto start mesh and power reboot
2. it become root again and the other node join
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, root restart mesh, it still root
test point 2: network destroy test
CI ready: 'No'
#TODO: root still root after restart will not run on CI
- ID: MESH_EST_0306
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0,0)
- - P MNODE(0,0) C !!!ready!!!
- P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. power reset layer2
2. root find child leave
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: 2 duts establish mesh network, then power reset layer2
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0307
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -I -o 1
- - P MNODE(0) C MESH:DEINIT,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. root mesh stop
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, root mesh stop
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0308
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) reboot
- - P MNODE(0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot root
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, reboot root
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0309
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. power reboot root
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, power reboot root
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0310
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -V -o 2
- - P MNODE(0) C MESH:SAVE,OK
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - SSC MNODE(0) mesh -T -o 2
- - P MNODE(0) C MESH:START,OK
- - DELAY 10
- - P MNODE(0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. root set auto start mesh and power reboot
2. it become root again and the other node join
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes establish mesh network, root restart mesh, it still root
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0311
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) mesh -I -o 1
- - P MNODE(0,0) C MESH:DEINIT,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. one of layer2 nodes mesh deinit
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, one of layer2 nodes mesh deinit
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0313
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) reboot
- - P MNODE(0,0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot one of layer2 nodes
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, reboot one of layer2 nodes
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0314
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0,0)
- - P MNODE(0,0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot one of layer2 nodes
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, power reset one of layer2 nodes
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0315
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,-1) mesh -I -o 1
- - P MNODE(0,-1) C MESH:DEINIT,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. one of leaf nodes mesh stop
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, one of leaf nodes mesh stop
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0316
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,-1) reboot
- - P MNODE(0,-1) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot one of leaf nodes
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, reboot one of leaf nodes
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0317
<<: *MESH_CASE
cmd set:
- ''
- - FREBOOT MNODE(0,-1)
- - P MNODE(0,-1) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. reboot one of leaf nodes
2. others re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, power reset one of leaf nodes
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0318
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -V -o 2
- - P MNODE(0) C MESH:SAVE,OK
- - SSC MNODE(0) reboot
- - P MNODE(0) C !!!ready!!!
- - SSC MNODE(0) mesh -T -o 2
- - P MNODE(0) C MESH:START,OK
- - DELAY 10
- - P MNODE(0) C MESH_EVENT_CONNECTED,1
expected result: |-
1. succeed
2. succeed
steps: |-
1. root restart mesh with same configuration
2. re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, root reboot and start mesh, it still root
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0319
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -V -o 2
- - P MNODE(0) C MESH:SAVE,OK
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - SSC MNODE(0) mesh -T -o 2
- - P MNODE(0) C MESH:START,OK
- - DELAY 10
- - P MNODE(0) C MESH_EVENT_CONNECTED,1
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. root restart mesh with same configuration
2. re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, root power reset and start mesh, it still root
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0320
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -V -o 2
- - P MNODE(0) C MESH:SAVE,OK
- - SSC MNODE(0) reboot
- - P MNODE(0) C !!!ready!!!
- - DELAY 1 5
- - ''
- - SSC MNODE(0) mesh -T -o 2
- - P MNODE(0) C MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. root restart mesh with same configuration
2. re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, root reboot and wait some time, then start mesh
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0321
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1
- - FREBOOT SSC1
- - P SSC1 C !!!ready!!!
- - DELAY 10
- - P SSC2 C MESH_EVENT_DISCONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. set dut2 ap mode, dut1 start mesh and connect to dut2
2. power reset dut2 (station mode), check dut1 disconnected
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: power off router, check root disconnected
test point 2: network destroy test
CI ready: 'Yes'
- ID: MESH_EST_0322
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1
- - FREBOOT SSC1
- - P SSC1 C !!!ready!!!
- - DELAY 10
- - P SSC2 C MESH_EVENT_DISCONNECTED
- - DELAY 30
- - ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- P SSC2 C MESH_EVENT_CONNECTED,1
expected result: |-
1. succeed
2. succeed
steps: |-
1. set dut2 ap mode, dut1 start mesh and connect to dut2
2. power reset dut2 (station mode), check dut1 disconnected
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: power off router for a while, check root connected
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0323
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1
- - SSC SSC1 ap -K -a 1
- - P SSC1 C +AP:KICK
- P SSC2 C MESH_EVENT_DISCONNECTED C MESH_EVENT_CONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. set dut2 ap mode, dut1 start mesh and connect to dut2
2. router deauth root, check dut1 disconnected then connected
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: router deauth root, check root disconnected then connected
test point 2: network destroy test
CI ready: 'Yes'
#TODO: waive root
- ID: MESH_EST_0324
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) mesh -W -o 0 -t 100
- - P MNODE(0) C +MESH:VOTE,OK
- - DELAY 1 3
- - ''
- - FREBOOT MNODE(0)
- - P MNODE(0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
steps: |-
1. waive_root and power reset root
2. re-establish network
initial condition: MESH_INIT1
test environment: SSC_T50_MESH1
summary: multiple nodes, root waive vote after network established, then power reboot root
test point 2: network destroy test
CI ready: 'No'
- ID: MESH_EST_0501 #TODO: support layer>127
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config all duts with max_connection=1 and max_layer>127
2. all duts start mesh
3. check mesh network establish
sub module: Establish
test environment: SSC_T50_MESH1
summary: (chain) establish mesh_network with max_connection=1 and max_layer>127
test point 2: chain topology test
CI ready: 'No'
auto test: 'No'
- ID: MESH_EST_0502 #TODO: support layer>127
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config all duts with max_layer>127
2. all duts start mesh
3. check mesh network establish
sub module: Establish
test environment: SSC_T50_MESH1
summary: (chain) establish mesh_network with max_layer>127
test point 2: chain topology test
CI ready: 'No'
auto test: 'No'
- ID: MESH_EST_0503 #TODO: support layer>127
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -o 0 -L -l [127,128]
- - P SSC[1-2] C +MESHSET:MLAYER,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 60
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. set a node with max_layer 127 and another 128
2. 2 duts start mesh
3. check mesh network establish
sub module: Establish
test environment: SSC_T2_MESH1
summary: (chain) set a node with max_layer 126 and another 127, establish mesh_network
test point 2: chain topology test
CI ready: 'No'
auto test: 'No'
- ID: MESH_EST_0504 #TODO: support layer>127
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config all duts with max_layer>127
2. all duts start mesh
3. check mesh network establish
4. reboot root, others re-establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: (chain) (ASSERT) establis mesh_network first, then reboot root
test point 2: chain topology test
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_0505 #TODO: support layer>127
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. config all duts with max_layer>127
2. all duts start mesh
3. check mesh network establish
4. reboot leaf, others re-establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: (chain) (ASSERT) establis mesh_network first, then reboot leaf
test point 2: chain topology test
CI ready: 'No'
auto test: 'No'
- ID: MESH_EST_0601
<<: *MESH_CASE
cmd set:
- MeshStress/MeshChannelSwitch
- - 'simple_test = True'
- ['']
expected result: |-
1. succeed
steps: |-
1. channel switch function test
sub module: Establish
test environment: SSC_T6_MESH1
summary: (channel switch) channel switch function test
test point 2: channel switch test
CI ready: 'No'
auto test: 'Yes'
- ID: MESH_EST_0602
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
- - P SSC[1-2] C +SAP:OK
- - SSC SSC2 op -S -o 1
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - SSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - SSC SSC1 op -S -o 1
- - P SSC1 C +MODE:OK
- - DELAY 30
- - P SSC2 C +SOFTAP:STACONNECTED
- - DELAY 20
- - ''
- *mesh_check_tree_num
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1,dut2 set esp32 softAP in different channel
2. dut[3-<node_num>] start mesh and connected with dut1
3. reboot dut1's softAP, check dut[3-<node_num>] connected with dut2
sub module: Establish
test environment: SSC_T50_MESH1
summary: stop router1,mesh network switch to another channel router network
test point 2: channel switch test
CI ready: 'No'
auto test: 'Yes'
- ID: MESH_EST_0603
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
- - P SSC[1-2] C +SAP:OK
- - SSC SSC2 op -S -o 1
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - MSSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - FREBOOT SSC1
- - P SSC1 C !!!ready!!!
- - DELAY 30
- - P SSC2 C +SOFTAP:STACONNECTED
- - DELAY 20
- - ''
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1,dut2 set esp32 softAP in different channel
2. dut[3-<node_num>] start mesh and connected with dut1
3. stop dut1's softAP, check dut[3-<node_num>] connected with dut2
sub module: Establish
test environment: SSC_T50_MESH1
summary: power reset router1,mesh network switch to another channel router network
test point 2: channel switch test
- ID: MESH_EST_0604
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
- - P SSC[1-2] C +SAP:OK
- - SSC SSC2 op -S -o 1
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - SSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:6
- - SSC SSC2 mac
- - P SSC2 A <softap_mac>:\+APMAC:(.+)\r\n
- - SSC MNODE(0) mesh -H -m <softap_mac> -n 7 -t 10
- - P MNODE(0) C MESH:SWITCH_CHANNEL,OK
- - DELAY <delay_time>
- - P SSC2 C +SOFTAP:STACONNECTED
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. dut[1-2]set esp32 softAP in channel [6,7]
2. dut[3-<node_num>] start mesh and connected with dut1
3. root switch channel to new channel 7
4. check dut[3-<node_num>] disconnected with dut1,connected to dut2,and switch to new channel
sub module: Establish
test environment: SSC_T50_MESH1
summary: root switch channel,mesh form old network switch to another channel router network
test point 2: channel switch test
- ID: MESH_EST_0605
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] op -S -o 2
- - P SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -n [1,6,11] -t <target_auth_enum>
- - P SSC[1-3] C +SAP:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 1 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[4-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:1
- - SSC SSC1 op -S -o 1
- - P SSC1 C +MODE:OK
- - DELAY 60
- - ''
- - MSSC SSC[4-<node_num>] mesh -Q -o 2
- - P SSC[4-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. dut[1-3]set esp32 softAP in channel [1,6,11]
2. dut[4-<node_num>] start mesh and connected with dut1
3. dut1 set sta mode
4. check dut[4-<node_num>] connected with router,and switch to new channel establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: stop router1,mesh choice switch to another channel router establish network
test point 2: channel switch test
- ID: MESH_EST_0606
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
- - P SSC[1-2] C +SAP:OK
- - SSC SSC2 op -S -o 1
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - SSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - SSC SSC1 op -S -o 1
- - P SSC1 C +MODE:OK
- - SSC MNODE(0) reboot
- - P MNODE(0) C !!!ready!!!
- - DELAY <delay_time>
- - P SSC2 C +SOFTAP:STACONNECTED
- - VALUE <tree_node_num> <tree_node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1,dut2 set esp32 softAP in different channel
2. dut[3-<node_num>] start mesh and connected with dut1
3. stop dut1's softAP and reboot root, check mesh switch channel and establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: stop dut1's softAP and reboot root, mesh choice switch to another channel router establish network
test point 2: channel switch test
- ID: MESH_EST_0607
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1] op -S -o 2
- - P SSC[1] C +MODE:OK
- - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 6 -t <target_auth_enum>
- - P SSC[1] C +SAP:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
- - P SSC[1] C +SAP:OK
- - DELAY 30
- - P SSC1 C +SOFTAP:STACONNECTED
- - DELAY 20
- - ''
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1,dut2 set esp32 softAP in different channel
2. dut[2-<node_num>] start mesh and connected with dut1
3. stop dut1's softAP and reboot root, check mesh switch channel and establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: router switch another channel, mesh choice switch to another channel establish network
test point 2: channel switch test
- ID: MESH_EST_0608
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- - SSC SSC[4] meshset -T -o 0 -t 1
- - P SSC[4] C +MESHSET:TYPE,OK
- - MSSC SSC[5-<node_num>] meshset -X -o 0 -i 1
- - P SSC[5-<node_num>] C +MESHSET:FIX_ROOT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[5-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - P SSC[5-<node_num>] C MESH_EVENT_CONNECTED
- - SSC SSC[1] op -S -o 2
- - P SSC[1] C +MODE:OK
- - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
- - P SSC[1] C +SAP:OK
- - DELAY <delay_time>
- - ''
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
steps: |-
1. no-router mesh network fix root
2. dut[4-<node_num>] start mesh and establish mesh network
3. dut1 set ap mode in diffent channel,check mesh switch channel and establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: mesh set fix root, choice switch to another channel link new router
test point 2: channel switch test
- ID: MESH_EST_0609
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
- - P SSC[1-2] C +SAP:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 6 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[4-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
steps: |-
1. set two router in different channel
2. all duts set channel to the first router
3. check mesh network connected with the first router
sub module: Establish
test environment: SSC_T50_MESH1
summary: two routers, set channel, establish network
test point 2: channel switch test
- ID: MESH_EST_0610
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] op -S -o 2
- - P SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -n
[<router_channel>,<router_channel>,<wrong_channel>]
- - P SSC[1-3] C +SAP:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- - MSSC SSC[4-<node_num>] mesh -Q -o 2
- - P SSC[4-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
- - DELAY 10
- - P PC_COM C +DELAYDONE
- P SSC[4-<node_num>] NC MESH_EVENT_DISCONNECTED
execution time: 2.0
expected result: |-
1. set router
2. check network establish
initial condition: MESH_DEINIT_STA
steps: |-
1. set three router with different channel
2. start all nodes to establish mesh network
summary: multiple router, establish mesh network
test point 2: channel switch test
test environment: SSC_T50_MESH1
CI ready: 'Yes'
auto test: 'Yes'
- ID: MESH_EST_0611
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] op -S -o 2
- - P SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -n
[<router_channel>,<router_channel>,<wrong_channel>]
- - P SSC[1-3] C +SAP:OK
- - SSC SSC[2-3] op -S -o 1
- - P SSC[2-3] C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- - MSSC SSC[4-<node_num>] mesh -Q -o 2
- - P SSC[4-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
- - DELAY 10
- - P PC_COM C +DELAYDONE
- P SSC[4-<node_num>] NC MESH_EVENT_DISCONNECTED
- - SSC SSC[2-3] op -S -o 2
- - P SSC[2-3] C +MODE:OK
- - FREBOOT SSC1
- - P SSC1 C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - SSC SSC[2-3] op -S -o 2
- - P SSC[2-3] C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -Q -o 2
- - P SSC[4-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
execution time: 2.0
expected result: |-
1. establish mesh network
2. power reset router and check restablish mesh network
initial condition: MESH_DEINIT_STA
steps: |-
1. establish mesh network with channel and bssid allow switch
2. power reset the the router, check the network connected with other router
summary: multiple router, network switch router
test point 2: channel switch test
test environment: SSC_T50_MESH1
- ID: MESH_EST_0612
<<: *MESH_CASE
cmd set:
- MeshStress/MeshNetworkDestroy
- - 'destroy_nodes = "MNODE(*,)"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_INIT_SWITCH
steps: |-
1. enable all nodes establish network
2. reboot all roots after network established
summary: multiple router, reboot all roots after network established
test point 2: channel switch test
test environment: SSC_T50_MESH1
- ID: MESH_EST_0613
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n 6 -t <target_auth_enum>
- - P SSC1 C +SAP:OK
- - MSSC SSC[2-<node_num>] mesh -I
- - P SSC[2-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[2-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[2-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[2-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 6 -h 0 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[2-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[2-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[2-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[2-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[2-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[2-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[2-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[2-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[2-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[2-<node_num>] mesh -T
- - P SSC[2-<node_num>] C +MESH:START,OK
- - DELAY 60
- - P SSC[2-<node_num>] C MESH_EVENT_CONNECTED
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
- - P SSC1 C +SAP:OK
- - DELAY 30
- - ''
- - MSSC SSC[2-<node_num>] channel -G
- - P SSC[2-<node_num>] C +CHANNEL:7
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- - SSC MNODE(0,0) reboot
- - P MNODE(0,0) C !!!ready!!!
- - DELAY 60
- - P MNODE(0,0,0) C MESH_EVENT_CONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1 set esp32 softAP in channel 6
2. dut[2-<node_num>] start mesh and connected with dut1
3. set dut1's softAP dfferent channel and reboot dut MNODE(0,0), check MNODE(0,0,0) CONNECTED
sub module: Establish
test environment: SSC_T50_MESH1
summary: mesh tree channel switch follow router,reboot layer2 check layer3
test point 2: channel switch test
- ID: MESH_EST_0614
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] op -S -o 2
- - P SSC[1-2] C +MODE:OK
- - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum> -h 1
- - P SSC[1-2] C +SAP:OK
- - SSC SSC2 op -S -o 1
- - P SSC2 C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- *mesh_config_cs_duts
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- *mesh_check_tree_num
- - MSSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - SSC SSC1 op -S -o 1
- - P SSC1 C +MODE:OK
- - DELAY <delay_time>
- - P SSC2 C +SOFTAP:STACONNECTED
- - DELAY 20
- - ''
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:7
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1,dut2 set esp32 softAP in different channel
2. dut[3-<node_num>] start mesh and connected with dut1
3. stop dut1's softAP, check dut[3-<node_num>] connected with hide dut2
sub module: Establish
test environment: SSC_T50_MESH1
summary: stop router1,mesh network switch to another channel hide router network
test point 2: channel switch test
- ID: MESH_EST_0615
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] op -S -o 2
- - P SSC[1-3] C +MODE:OK
- - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -n [1,6,11] -t <target_auth_enum> -h 1
- - P SSC[1-3] C +SAP:OK
- - SSC SSC[2-3] op -S -o 1
- - P SSC[2-3] C +MODE:OK
- - MSSC SSC[4-<node_num>] mesh -I
- - P SSC[4-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 1 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[4-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[4-<node_num>] mesh -T
- - P SSC[4-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>-3
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
- - MSSC SSC[4-<node_num>] channel -G
- - P SSC[4-<node_num>] C +CHANNEL:1
- - SSC SSC1 op -S -o 1
- - P SSC1 C +MODE:OK
- - SSC SSC[2-3] op -S -o 2
- - P SSC[2-3] C +MODE:OK
- - DELAY 60
- - ''
- - MSSC SSC[4-<node_num>] mesh -Q -o 2
- - P SSC[4-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. dut[1-3]set esp32 softAP in channel [1,6,11]
2. dut[4-<node_num>] start mesh and connected with dut1
3. dut1 set sta mode
4. check dut[4-<node_num>] connected with router,and switch to new channel establish mesh network
sub module: Establish
test environment: SSC_T50_MESH1
summary: stop router1,mesh choice switch to another hide channel router establish network
test point 2: channel switch test
- ID: MESH_EST_0616
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - SSC SSC[1-3] meshset -T -o 0 -t 1
- - P SSC[1-3] C +MESHSET:TYPE,OK
- - MSSC SSC[4-<node_num>] meshset -X -o 0 -i 1
- - P SSC[4-<node_num>] C +MESHSET:FIX_ROOT,OK
- - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 0 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- - MSSC SSC[1-<node_num>] mesh -Q -o 2
- - P SSC[1-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>)
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. no-router mesh set three roots
2. dut[1-<node_num>] start mesh and establish mesh trees
3. check mesh trees
sub module: Establish
test environment: SSC_T50_MESH1
summary: mesh no router and set three roots, establish trees and check
test point 2: channel switch test
- ID: MESH_EST_0617
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -T -o 0 -t 1
- - P SSC[1-2] C +MESHSET:TYPE,OK
- - MSSC SSC[3-<node_num>] meshset -X -o 0 -i 1
- - P SSC[3-<node_num>] C +MESHSET:FIX_ROOT,OK
- - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 0 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- - MSSC SSC[1-<node_num>] mesh -Q -o 2
- - P SSC[1-<node_num>] T topo
- - MESHTREE
- - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>)
- - SSC SSC1 reboot
- - P SSC1 C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. no-router mesh set two roots
2. dut[1-<node_num>] start mesh and establish mesh trees
3. reboot dut1,check establish mesh trees
sub module: Establish
test environment: SSC_T50_MESH1
summary: mesh no router and set two roots, reboot one root establish tree and check mesh tree
test point 2: channel switch test
- ID: MESH_EST_0618
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - SSC SSC[1] meshset -T -o 0 -t 1
- - P SSC[1] C +MESHSET:TYPE,OK
- - MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1
- - P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK
- - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 6 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
- - SSC SSC1 mesh -T -o 1
- - P SSC1 C +MESH:STOP,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 7 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - MSSC SSC[1-<node_num>] channel -G
- - P SSC[1-<node_num>] C +CHANNEL:7
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. no-router mesh set fix root
2. dut[1-<node_num>] start mesh and establish mesh trees
3. stop dut1 set another channel then start,check establish mesh trees
sub module: Establish
test environment: SSC_T50_MESH1
summary: no router change root to another channel, establish tree and check mesh tree
test point 2: channel switch test
- ID: MESH_EST_0619
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - SSC SSC[1] meshset -T -o 0 -t 1
- - P SSC[1] C +MESHSET:TYPE,OK
- - MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1
- - P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK
- - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
- - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 6 -h 1 -t
<max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
- - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
- - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
- - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
- - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
- - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
- - SSC SSC1 mesh -H -n 7 -t 10
- - P SSC1 C MESH:SWITCH_CHANNEL,OK
- - DELAY <delay_time>
- - ''
- - MSSC SSC[1-<node_num>] channel -G
- - P SSC[1-<node_num>] C +CHANNEL:7
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. no-router mesh set fix root
2. dut[1-<node_num>] start mesh and establish mesh trees
3. dut1 call channel switch API to another channel,check establish mesh trees
sub module: Establish
test environment: SSC_T50_MESH1
summary: no router root call channel switch API, establish tree and check mesh tree
test point 2: channel switch test
- ID: MESH_EST_3001
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -t <max_connect>
- - P SSC1 C +MESHSET:CFG,FAIL
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -t <max_connect>
- - P SSC1 C +MESHSET:CFG,OK
expected result: |-
1. fail
2. succeed
steps: |-
1. set config without init
2. init and set config
initial condition: MESH_DEINIT_STA
test environment: SSC_T1_MESH1
summary: mesh config without mesh init
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'Yes'
- ID: MESH_EST_3002
<<: *MESH_CASE
initial condition: MESH_DEINIT_STA
test environment: SSC_T1_MESH1
cmd set:
- ''
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,FAIL
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,FAIL
expected result: |-
1. fail
2. fail
steps: |-
1. mesh start without init
2. mesh start without set config
summary: mesh start without init or config
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'Yes'
- ID: MESH_EST_3003
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 1 10
- - ''
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
expected result: |-
1. succeed
2. succeed
steps: |-
1. mesh init/config
2. mesh start twice
test environment: SSC_T1_MESH1
summary: mesh start again after mesh start
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'Yes'
#TODO: if start twice will connected successfully
- ID: MESH_EST_3004
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - R SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -t <max_connect>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 meshset -M -o 0 -t 8 -s <map_password> -l 10
- - P SSC1 C +MESHSET:MAP_AUTH,FAIL
- - SSC SSC1 meshset -M -o 0 -t 3 -s <map_password> -l 100
- - P SSC1 C +MESHSET:MAP_PWD,FAIL
- - SSC SSC1 meshset -E -o 0 -i 1 -s <temp_string> -l 100
- - P SSC1 C +MESHSET:MIE_KEY,FAIL
expected result: |-
1. succeed
2. fail
3. fail
3. fail
steps: |-
1. mesh init/config
2. set map_password with auth=8
3. set map_password with len>64
4. set ie_key with len>64
initial condition: MESH_DEINIT_STA
test environment: SSC_T1_MESH1
summary: mesh config with parameter value overflow
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'Yes'
- ID: MESH_EST_3005
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 op -S -o 1
- - R SSC1 C +MODE:OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config and switch wifi op_mode to station
3. mesh start
4. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: (ASSERT) switch to station mode after mesh config
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_3006
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 op -S -o 2
- - R SSC1 C +MODE:OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config and switch wifi op_mode to station
3. mesh start
4. check mesh connected and layer is 1
test environment: SSC_T1_MESH1
summary: (ASSERT) switch to soft_ap mode after mesh config
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_3007
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <temp_string> -n <router_channel> -t <max_connect>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config with inexistent router
3. mesh start
4. check mesh no parent found
test environment: SSC_T1_MESH1
summary: start mesh with inexistent router
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'Yes'
- ID: MESH_EST_3008
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<wrong_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init
2. mesh config with wrong channel
3. mesh start
4. check parent not found
test environment: SSC_T1_MESH1
summary: mesh start with wrong router channel
test point 1: abnormal/special use
test point 2: mesh init/config/start test
CI ready: 'No'
#TODO: not work after v3.3
- ID: MESH_EST_3101
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) sta -S
- - P MNODE(0) C +SCANDONE
- - DELAY 5
- - P PC_COM C DELAYDONE
- P MNODE(0) NC MESH_EVENT_SCAN_DONE
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
steps: |-
1. establish mesh network
2. wifi scan and check no MESH_EVENT_SCAN_DONE
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: (ASSERT) wifi scan on root without set self organized
test point 1: abnormal/special use
test point 2: use wifi api after mesh start
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_3102
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) sta -S
- - P MNODE(0,0) C +SCANDONE
- P MNODE(0,0) NC MESH_EVENT_SCAN_DONE
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
steps: |-
1. establish mesh network
2. wifi scan and check no MESH_EVENT_SCAN_DONE
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: (ASSERT) wifi scan on layer2 without set self organized
test point 1: abnormal/special use
test point 2: use wifi api after mesh start
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_3103
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 1
- - ''
- - SSC SSC1 sta -S
- - P SSC1 C +SCANDONE
- P SSC1 NC MESH_EVENT_SCAN_DONE
- - ASSERT
- - ''
expected result: |-
1. succeed
2. succeed
steps: |-
1. establish mesh network
2. wifi scan and check no MESH_EVENT_SCAN_DONE
initial condition: MESH_DEINIT_STA
test environment: SSC_T1_MESH1
summary: (ASSERT) wifi scan during mesh scan without set self organized
test point 1: abnormal/special use
test point 2: use wifi api after mesh start
CI ready: 'No'
auto test: 'No'
active: "No"
- ID: MESH_EST_3104
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 5
- - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 ap -Q
- - R SSC2 A <softap_ssid>:\+APCONFIG:(\w+)
- - SSC SSC1 sta -C -s <softap_ssid> -p <map_password>
- - P SSC1 C +JAP:DISCONNECTED
- - DELAY 10
- - P PC_COM C DELAYDONE
- P SSC1 NC +JAP:CONNECTED
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut2 start mesh
2. dut1 connect to dut2, check disconnected
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: normal station can't connected with mesh root
test point 1: abnormal/special use
test point 2: use wifi api after mesh start
CI ready: 'Yes'
#TODO: one(some) of the nodes set wrong password, establish----
- ID: MESH_EST_2001
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 meshset -U -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -b <router_bssid> -n
<router_channel> -t 1 -l 1
- - P SSC1 C +MESHSET:PARENT,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. dut1 set parent be router
3. start dut1 and check it connected with router
4. start dut2 and check it connected with dut1
test environment: SSC_T2_MESH1
summary: set dut1 parent as router with mesh_id, dut2 without set_parent, check dut2 connected with dut1
test point 1: manual network function
test point 2: set parent test
CI ready: 'Yes'
- ID: MESH_EST_2002
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 meshset -U -o 0 -s <router_ssid> -p <router_password> -b <router_bssid> -n
<router_channel> -t 1 -l 1
- - P SSC1 C +MESHSET:PARENT,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. set dut1 parent to router without mesh_id
3. start dut1 and check it connected with router
4. start dut2 and check it connected with dut1
test environment: SSC_T2_MESH1
summary: set dut1 parent to router without mesh_id, dut2 without set_parent, check dut2 connected with dut1
test point 1: manual network function
test point 2: set parent test
CI ready: 'Yes'
- ID: MESH_EST_2003
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 meshset -U -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -b <router_bssid> -n
<router_channel> -t 1 -l 1
- - P SSC1 C +MESHSET:PARENT,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 10
- - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. set dut1 parent to router
3. start dut2 and check it connected with router
4. start dut1 and check it connected with router
test environment: SSC_T2_MESH1
summary: set dut1 parent to router, start dut1 with amother root already exists
test point 1: manual network function
test point 2: set parent test
CI ready: 'Yes'
- ID: MESH_EST_2004
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 ap -Q
- - R SSC1 A <meshap_ssid>:\+APCONFIG:(\w+),
- - SSC SSC2 meshset -U -o 0 -m <mesh_id> -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
- - P SSC2 C +MESHSET:PARENT,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. set dut2 parent to dut1
3. start dut1 and check it connected with router
4. start dut2 and check it connected with dut1
test environment: SSC_T2_MESH1
summary: set dut2 parent to dut1(root), start dut2 after dut1 connected
test point 1: manual network function
test point 2: set parent test
CI ready: 'Yes'
- ID: MESH_EST_2005
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 ap -Q
- - R SSC1 A <meshap_ssid>:\+APCONFIG:(\w+),
- - SSC SSC2 meshset -U -o 0 -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
- - P SSC2 C +MESHSET:PARENT,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. set dut2 parent to dut1 without mesh_id
3. start dut1 and check it connected with router
4. start dut2 and check it connected with dut1
test environment: SSC_T2_MESH1
summary: set dut2 parent to dut1(root) without mesh_id, start dut2 after dut1 connected
test point 1: manual network function
test point 2: set parent test
CI ready: 'Yes'
- ID: MESH_EST_2006
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] mesh -I
- - P SSC[1-3] C +MESH:INIT,OK
- - SSC SSC[1-3] meshset -G -o 0 -m [<mesh_id>,<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-3] C +MESHSET:CFG,OK
- - SSC SSC[1,3] mesh -T
- - P SSC[1,3] C +MESH:START,OK
- P SSC[1,3] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
- - SSC SSC3 ap -Q
- - R SSC3 A <meshap_ssid>:\+APCONFIG:(\w+),
- - SSC SSC2 meshset -U -o 0 -m <mesh_id2> -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
- - P SSC2 C +MESHSET:PARENT,OK C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_DISCONNECTED
- P SSC3 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
steps: |-
1. mesh init/config
2. dut1,dut3 start mesh with different mesh id
3. dut2 connect to dut1 first
4. set dut2's parent to dut3
5. check dut2 leave dut1 and join dut3
test environment: SSC_T3_MESH1
summary: set one node's parent to another mesh network
test point 1: manual network function
test point 2: set parent test
CI ready: 'No'
- ID: MESH_EST_2007
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 op -S -o 2
- - P SSC2 C +MODE:OK
- - SSC SSC2 ap -S -s <target_ssid> -n <router_channel>
- - P SSC2 C +SAP:OK
- - SSC SSC1 meshset -U -o 0 -s <target_ssid> -n <router_channel> -t 1 -l 1
- - P SSC1 C +MESHSET:PARENT,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- P SSC2 C +SOFTAP:STACONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. mesh init/config
2. dut1 start mesh and establish network
3. set dut2 softAP mode
4. set dut1's parent to dut2
test environment: SSC_T2_MESH1
summary: set ont node's parent to another Router after connected
test point 1: manual network function
test point 2: set parent test
CI ready: 'No'
#- ID: MESH_EST_2008
# <<: *MESH_CASE
# cmd set:
# - ''
# - - SSC SSC[1-2] mesh -I
# - - P SSC[1-2] C +MESH:INIT,OK
# - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <temp_string> -n <router_channel> -t <max_connect> -i <ie_encrypt>
# - - P SSC[1-2] C +MESHSET:CFG,OK
# - - SSC SSC1 meshset -U -o 0 -s <temp_string> -n <router_channel> -t 1 -l 1
# - - P SSC1 C +MESHSET:PARENT,OK
# - - SSC SSC[1-2] mesh -T
# - - P SSC[1-2] C +MESH:START,OK
# - P SSC2 C MESH_EVENT_CONNECTED,2
# - P SSC1 C MESH_EVENT_CHILD_CONNECTED
# expected result: |-
# 1. succeed
# 2. succeed
# 3. succeed
# 4. succeed
# steps: |-
# 1. mesh init/config
# 2. dut1 set parent to inexist router
# 3. start mesh
# 4. check dut2 connected with dut1
# test environment: SSC_T2_MESH1
# summary: set one node's parent to inexist router and establish network
# test point 1: manual network function
# test point 2: set parent test
# CI ready: 'Yes'
- ID: MESH_EST_2101
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 0 -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - SSC SSC1 mesh -Q -o 2
- - P SSC1 C IS_ROOT
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init/config dut1 no-router and set type root
2. mesh start
3. check dut1 is root
test environment: SSC_T1_MESH1
summary: dut1 set type root, start mesh without router
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2102
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 0 -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 mesh -Q -o 2
- - P SSC1 C IS_ROOT
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init/config dut1 set type root
2. mesh start
3. check dut1 connected with router and type root
test environment: SSC_T1_MESH1
summary: dut1 set type root, set router and start mesh
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2103
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 0 -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC2 meshset -X -o 0 -i 1
- - P SSC2 C +MESHSET:FIX_ROOT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init/config all duts no-router, set dut1 root
2. mesh start all duts
3. check mesh tree established and stably
test environment: SSC_T2_MESH1
summary: dut1 set type root, dut2 fix root, establish mesh network without router
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2104
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 0 -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init/config all duts no-router, set dut1 root
2. mesh start all duts
3. check mesh tree established and stably
test environment: SSC_T2_MESH1
summary: dut1 set type root without router, dut2 set router without set type, establish mesh network
test point 1: manual network function
test point 2: no-router function test
CI ready: 'No'
- ID: MESH_EST_2105
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 2 5
- - ''
- - SSC SSC1 mesh -I -o 1
- - P SSC1 C +MESH:DEINIT,OK
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 1
- - P SSC1 C +MESHGET:TYPE,OK,0
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 5
- - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
- P SSC2 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. start one dut with root leaf
2. check mesh type cleared after re-init mesh
3. start mesh and let this dut be layer2
test environment: SSC_T2_MESH1
summary: check mesh root type info cleared after mesh re-init
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2106
<<: *MESH_CASE
cmd set:
- ''
- *mesh_init_all_duts
- *mesh_config_all_duts_no_router
- *mesh_start_all_duts
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. mesh init/config all duts no-router, set dut1 root
2. mesh start all duts
3. check mesh tree established and stably
test environment: SSC_T50_MESH1
summary: multiple nodes, establish mesh network without router
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2107
<<: *MESH_CASE
cmd set:
- ''
- *mesh_init_all_duts
- *mesh_config_all_duts_no_router
- *mesh_start_all_duts
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC SSC1 reboot
- - P SSC1 C !!!ready!!!
- P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 50
- - P SSC[2-<node_num>] C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. establish mesh no-router network
2. root reboot
3. check others can't connected
test environment: SSC_T50_MESH1
summary: multiple nodes, establish mesh network without router, then root reboot
test point 1: manual network function
test point 2: no-router function test
CI ready: 'No'
- ID: MESH_EST_2108
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 0 -t 1
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC2 meshset -X -o 0 -i 1
- - P SSC2 C +MESHSET:FIX_ROOT,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - MSSC SSC[1-2] meshset -A -n <scan_times> -t <vote_time> -l 15 -i <monitor_ie>
- - P SSC[1-2] C +MESHSET:ATTEMPTS,OK
- - SSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
- - SSC SSC1 mesh -I -o 1
- - P SSC1 C +MESH:DEINIT,OK
- P SSC2 C MESH_EVENT_DISCONNECTED
- - DELAY 40
- - P SSC2 C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. establish mesh no-router network
2. root deinit
3. check layer2 no parent found
test environment: SSC_T2_MESH1
summary: no-router, root deinit and check layer2 no parent found
test point 1: manual network function
test point 2: no-router function test
CI ready: 'No'
- ID: MESH_EST_2109
<<: *MESH_CASE
cmd set:
- ''
- *mesh_init_all_duts
- *mesh_config_all_duts_no_router
- - MSSC SSC[1-<node_num>] meshset -A -n <scan_times> -t <vote_time> -l 15 -i <monitor_ie>
- - P SSC[1-<node_num>] C +MESHSET:ATTEMPTS,OK
- *mesh_start_all_duts
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC SSC1 mesh -I -o 1
- - P SSC1 C +MESH:DEINIT,OK
- P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 60
- - P MNODE(0,0) C MESH_EVENT_NO_PARENT_FOUND
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. establish mesh no-router network
2. root deinit
3. check others can't connected
test environment: SSC_T6_MESH1
summary: multiple nodes, establish mesh network without router, then root deinit
test point 1: manual network function
test point 2: no-router function test
CI ready: 'No'
- ID: MESH_EST_2110
<<: *MESH_CASE
cmd set:
- ''
- *mesh_init_all_duts
- *mesh_config_all_duts_no_router
- *mesh_start_all_duts
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - FREBOOT SSC1
- - P SSC1 C !!!ready!!!
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- *mesh_config_dut1_no_router
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. establish mesh no-router network
2. root restart mesh
3. check mesh tree re-establish
test environment: SSC_T50_MESH1
summary: multiple nodes, establish mesh network without router, then root restart root and check mesh network re-establish
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2111
<<: *MESH_CASE
cmd set:
- ''
- *mesh_init_all_duts
- *mesh_config_all_duts_no_router
- *mesh_start_all_duts
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC MNODE(0,0) reboot
- - P MNODE(0,0) C !!!ready!!!
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>-1
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. establish mesh no-router network
2. one of the l2 nodes reboot
3. check mesh tree re-establish
test environment: SSC_T50_MESH1
summary: multiple nodes, establish mesh network without router, then reboot one of the l2 nodes
test point 1: manual network function
test point 2: no-router function test
CI ready: 'No'
- ID: MESH_EST_2112
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-3] mesh -I
- - P SSC[1-3] C +MESH:INIT,OK
- - SSC SSC[1-2] meshset -T -o 0 -t 1
- - P SSC[1-2] C +MESHSET:TYPE,OK
- - SSC SSC3 meshset -X -o 0 -i 1
- - P SSC3 C +MESHSET:FIX_ROOT,OK
- - SSC SSC[1-3] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
<map_password> -i <ie_encrypt>
- - P SSC[1-3] C +MESHSET:CFG,OK
- - SSC SSC[2-3] mesh -T
- - P SSC[2-3] C +MESH:START,OK
- P SSC3 C MESH_EVENT_CONNECTED,2
- - SSC SSC2 mesh -I -o 1
- - P SSC2 C +MESH:DEINIT,OK
- P SSC3 C MESH_EVENT_DISCONNECTED
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- P SSC3 C MESH_EVENT_CONNECTED,2
- P SSC1 C MESH_EVENT_CHILD_CONNECTED
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. all duts set no-router, dut1 and dut2 is root, dut3 fix root
2. start dut2 and dut3 establish network
3. deinit dut2 and start dut1, dut3 disconencted with dut2 then connect to dut1
test environment: SSC_T3_MESH1
summary: set two no-router root, check node switch between two root
test point 1: manual network function
test point 2: no-router function test
CI ready: 'Yes'
- ID: MESH_EST_2201
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -t 3
- - P SSC1 C +MESHSET:TYPE,OK
- - MSSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - MSSC SSC1 meshset -o 0 -L -l <max_layer>
- - P SSC1 C +MESHSET:MLAYER,OK
- - MSSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
- - SSC SSC1 op -Q
- - P SSC1 C +CURMODE:1
- - LOOP 3 2 "[0,1,2]" "[0,1,2]"
- ''
- - SSC SSC1 sleep -S -t {%d}
- - P SSC1 C +SLEEP_MODE:OK
- - SSC SSC1 sleep -Q
- - P SSC1 C +CURMODE:{%d}
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. start one dut with mesh type leaf
2. check not connect to Router
3. check station mode
4. check nonsleep/light/modem sleep mode setable
test environment: SSC_T1_MESH1
summary: start dut1 as leaf, check disconnected, station mode, and sleep mode setable
test point 1: manual network function
test point 2: standalone station test
CI ready: 'Yes'
- ID: MESH_EST_2202
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - SSC SSC1 meshset -T -t 3
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -o 0 -L -l <max_layer>
- - P SSC[1-2] C +MESHSET:MLAYER,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 15
- - ''
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - DELAY 5
- - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- P SSC1 C MESH_EVENT_CONNECTED,2
- - SSC SSC1 op -Q
- - P SSC1 C +CURMODE:1
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. first start one dut with mesh type leaf
2. then start the normal node
3. check if networking established
4. check wifo op mode station
test environment: SSC_T2_MESH1
summary: dut1 start mesh with type leaf, dut2 normal node, establish network
test point 1: manual network function
test point 2: standalone station test
CI ready: 'Yes'
- ID: MESH_EST_2203
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -t 3
- - P SSC1 C +MESHSET:TYPE,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 3 10
- - ''
- - SSC SSC1 mesh -I -o 1
- - P SSC1 C +MESH:DEINIT,OK
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -T -o 1
- - P SSC1 C +MESHGET:TYPE,OK,0
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 5
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. start one dut with type leaf
2. check mesh type cleared after re-init mesh
3. start mesh and connected with Router
test environment: SSC_T1_MESH1
summary: check mesh leaf type info cleared after mesh re-init
test point 1: manual network function
test point 2: standalone station test
CI ready: 'Yes'
- ID: MESH_EST_2204
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-5] meshset -T -t 3
- - P SSC[1-5] C +MESHSET:TYPE,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] meshset -o 0 -L -l <max_layer>
- - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - MSSC SSC[1-5] meshset -T -o 1
- - P SSC[1-5] C +MESHGET:TYPE,OK,3
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. several duts set type leaf
2. all duts start mesh together
3. check if networking established
4. check leaf type nodes
test environment: SSC_T50_MESH1
summary: several duts set type leaf, all duts start mesh together
test point 1: manual network function
test point 2: standalone station test
CI ready: 'No'
- ID: MESH_EST_2301
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) meshset -D -m <mesh_id2>
- - P MNODE(0,0) C MESHSET:MESH_ID,OK
- P MNODE(0,0) C MESH_EVENT_DISCONNECTED
- - DELAY 10
- - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
steps: |-
1. dynamic set mesh id
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: dynamic set mesh id, check disconnected with parent
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
#TODO: v3.1 will not run dynamic cases on CI
- ID: MESH_EST_2302
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0) meshset -D -m <mesh_id2>
- - P MNODE(0) C MESHSET:MESH_ID,OK
- P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
expected result: |-
1. succeed
steps: |-
1. root dynamic set mesh id
initial condition: MESH_INIT1
test environment: SSC_T2_MESH1
summary: root dynamic set mesh id, check child leave
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2303
<<: *MESH_CASE
cmd set:
- ''
- - SSC MNODE(0,0) meshset -D -m <mesh_id2>
- - P MNODE(0,0) C MESHSET:MESH_ID,OK
- P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
- - DELAY 15
- - ''
- - SSC MNODE(0,0) mesh -Q -o 2
- - P MNODE(0,0) C IS_ROOT
expected result: |-
1. succeed
steps: |-
1. layer2 dynamic set mesh id
initial condition: MESH_INIT1
test environment: SSC_T6_MESH1
summary: layer2 dynamic set mesh id, check disconnected and child leave
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2304
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -i 0
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC MNODE(0,0) meshset -D -m <mesh_id2>
- - P MNODE(0,0) C MESHSET:MESH_ID,OK
- P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
- - DELAY 10
- - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
expected result: |-
1. succeed
steps: |-
1. root dynamic set mesh id
initial condition: MESH_DEINIT_STA
test environment: SSC_T6_MESH1
summary: layer2 dynamic set mesh id without ie_encrypt, check disconnected and child leave
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2305
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - MSSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - MSSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - SSC SSC1 meshset -D -m <mesh_id2>
- - P SSC1 C MESHSET:MESH_ID,OK
- P SSC1 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
steps: |-
1. layer2 dynamic set mesh id
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh id on disconnected node, check connected
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2306
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - MSSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 meshset -D -m <mesh_id2>
- - P SSC1 C MESHSET:MESH_ID,OK
- - MSSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
steps: |-
1. layer2 dynamic set mesh id
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh id on root, check new node join
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2307
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC[1-2] C +MESHSET:CFG,OK
- - MSSC SSC[1-2] mesh -T
- - P SSC[1-2] C +MESH:START,OK
- - DELAY 10
- - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC1 meshset -D -m <mesh_id2>
- - P SSC1 C MESHSET:MESH_ID,OK
- - P SSC1 C MESH_EVENT_DISCONNECTED
- - DELAY 5
- P SSC1 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. set 2 duts with different mesh_id, both root
2. dynamic set mesh id on dut1
3. dut1 disconnected with router and join the other network
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh id on root, check disconnected and join new network
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2308
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC MNODE(0,0) meshset -E -i 1 -e <map_password> -l 10
- - P MNODE(0,0) C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
- - DELAY 15
- - ''
- - SSC MNODE(0,0) mesh -Q -o 2
- - P MNODE(0,0) C IS_ROOT
expected result: |-
1. succeed
steps: |-
1. all duts establish mesh neetwork with ie_encrypt = 0
2. layer 2 dynamic set mesh ie encrypt
3. check layer2 disconnected with parent and then become root
initial condition: MESH_DEINIT_STA
test environment: SSC_T6_MESH1
summary: dynamic set mesh ie encrypt, check disconnected and child leave
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'No'
- ID: MESH_EST_2309
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-<node_num>] mesh -I
- - P SSC[1-<node_num>] C +MESH:INIT,OK
- - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 1
- - P SSC[1-<node_num>] C +MESHSET:CFG,OK
- - MSSC SSC[1-<node_num>] mesh -T
- - P SSC[1-<node_num>] C +MESH:START,OK
- - DELAY <delay_time>
- - ''
- - VALUE <tree_node_num> <node_num>
- - R PC_COM L OK
- *mesh_check_tree_num
- *mesh_tree_stably
- - SSC MNODE(0,0) meshset -E -i 1 -e <temp_string> -l 10
- - P MNODE(0,0) C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
- - DELAY 15
- - ''
- - SSC MNODE(0,0) mesh -Q -o 2
- - P MNODE(0,0) C IS_ROOT
expected result: |-
1. succeed
steps: |-
1. all duts establish mesh neetwork with ie_encrypt = 1
2. layer 2 dynamic set mesh ie encrypt key
3. check layer2 disconnected with parent and then become root
initial condition: MESH_DEINIT_STA
test environment: SSC_T6_MESH1
summary: dynamic set mesh ie key, check disconnected and child leave
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2310
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [0,1]
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - SSC SSC2 meshset -E -i 0 -e <map_password> -l 10
- - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. dut1 set ie_encrypt=0 and dut2 set ie encrypt=1
2. start dut1 to be root first
3. start dut2 and dynamic set mesh ie encrypt=0
4. check dut2 connected with dut1
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh ie encrypt to 0, check connected
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2311
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [1,0]
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - SSC SSC2 meshset -E -i 1 -e <map_password> -l 10
- - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
steps: |-
1. dut1 set ie_encrypt=1 and dut2 set ie encrypt=0
2. start dut1 to be root first
3. start dut2 and dynamic set mesh ie encrypt=1
4. check dut2 connected with dut1
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh ie encrypt to 1, check connected
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2312
<<: *MESH_CASE
cmd set:
- ''
- - MSSC SSC[1-2] mesh -I
- - P SSC[1-2] C +MESH:INIT,OK
- - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
- - P SSC[1-2] C +MESHSET:CFG,OK
- - SSC SSC[1-2] meshset -E -i 1 -e [<map_password>,<temp_string>] -l 10
- - P SSC[1-2] C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 10
- - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- - SSC SSC2 meshset -E -i 1 -e <map_password> -l 10
- - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
- P SSC2 C MESH_EVENT_CONNECTED,2
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. 2 duts config mesh with different ie_encrypt key
2. dut2 dynamic set mesh ie encrypt key after start
3. check dut2 connected with dut1
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: dynamic set mesh ie key, check connected
test point 1: manual network function
test point 2: dynamic set configuration
CI ready: 'Yes'
- ID: MESH_EST_2401
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 mesh -I
- - P SSC1 C +MESH:INIT,OK
- - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
<router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC1 C +MESHSET:CFG,OK
- - SSC SSC1 mesh -T
- - P SSC1 C +MESH:START,OK
- - DELAY 1 2
- - ''
- - SSC SSC1 meshset -O -o 0 -n 0 -t 0
- - P SSC1 C +MESHSET:SELF_ORG,OK
- - SSC SSC1 sta -S -T
- - P SSC1 C MESH_EVENT_SCAN_DONE
expected result: |-
1. succeed
2. succeed
steps: |-
1. dut1 start mesh then set self_organized(0,0)
2. wifi scan
2. check MESH_EVENT_SCAN_DONE on dut1
initial condition: MESH_DEINIT_STA
test environment: SSC_T1_MESH1
summary: set self_organized (0,0) and user scan after mesh start
test point 1: manual network function
test point 2: self_organized
CI ready: 'Yes'
- ID: MESH_EST_2402
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1
- - SSC SSC1 reboot
- - P SSC1 C !!!ready!!!
- P SSC2 C MESH_EVENT_DISCONNECTE
- - SSC SSC2 meshset -O -o 0 -n 0 -t 0
- - P SSC2 C +MESHSET:SELF_ORG,OK
- - DELAY 1
- - P SSC2 C MESH_EVENT_STOP_RECONNECTION
- - SSC SSC2 sta -S -T
- - P SSC2 C MESH_EVENT_SCAN_DONE
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. dut1 set AP, dut2 start mesh and connected with dut1
2. reboot dut1, dut2 disconnected with dut1
3. set self_organized(0,0) and then use scan (stop scan first)
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: set self_organized (0,0) when root connecting to router
test point 1: manual network function
test point 2: self_organized
CI ready: 'Yes'
# TODO: discussion
- ID: MESH_EST_2403
<<: *MESH_CASE
cmd set:
- ''
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC2 mesh -I
- - P SSC2 C +MESH:INIT,OK
- - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
<router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
- - P SSC2 C +MESHSET:CFG,OK
- - SSC SSC2 mesh -T
- - P SSC2 C +MESH:START,OK
- P SSC2 C MESH_EVENT_CONNECTED,1
- - SSC SSC1 reboot
- - P SSC1 C !!!ready!!!
- P SSC2 C MESH_EVENT_DISCONNECTE
- - SSC SSC2 meshset -O -o 0 -n 1 -t 1
- - P SSC2 C +MESHSET:SELF_ORG,OK
- - SSC SSC2 meshset -T -o 1
- - P SSC2 C MESHGET:TYPE,OK,0
expected result: |-
1. succeed
2. succeed
3. succeed
steps: |-
1. dut1 set AP, dut2 start mesh and connected with dut1
2. reboot dut1, dut2 disconnected with dut1
3. set dut2 self_organized(1,1) and check it IDLE
initial condition: MESH_DEINIT_STA
test environment: SSC_T2_MESH1
summary: set self_organized (1,1) to give up root state
test point 1: manual network function
test point 2: self_organized
CI ready: 'Yes'
- ID: MESH_EST_6001
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network
summary: performance test, start all nodes to establish network
test point 1: performance
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6002
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'ie_encrypt = False'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network without mesh ie encrypted
summary: performance test, start all nodes to establish network without mesh ie encrypted
test point 1: performance
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6003
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'map_encrypt = False'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network without mesh ap encrypted
summary: performance test, start all nodes to establish network without mesh ap encrypted
test point 1: performance
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6004
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'map_encrypt = False'
- ['']
- - 'ie_encrypt = False'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network without map/mie encrypted
summary: performance test, start all nodes to establish network without map/mie encrypted
test point 1: performance
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6005
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'default_switch_rssi = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network without default switch rssi
summary: performance test, start all nodes to establish network with default switch rssi
test point 1: performance
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6101
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = ["MNODE(0)"]'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, destroy root after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6102
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = ["MNODE(l2)"]'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, destroy L2 nodes after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6103
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = ["MNODE(l1-l2)"]'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, destroy root and L2 nodes after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6104
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, destroy random 10 nodes after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6105
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "MNODE(0)"'
- ['']
- - 'restart_mesh = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, root restart mesh after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6106
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "MNODE(0)"'
- ['']
- - 'destroy_mode = "power"'
- ['']
- - 'restart_mesh = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, power reset root and restart mesh after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_6107
<<: *MESH_CASE
category: Performance
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
- - 'destroy_mode = "power"'
- ['']
- - 'restart_mesh = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: performance test, power reset random nodes and restart mesh after network established
test point 1: performance
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5001
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'start_number_list = [1,0]'
- ['']
- - 'start_interval_sec = 15'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network without map/mie encrypted
summary: stress test, start one nodes to be root first, then start all others
test point 1: stress
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5002
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'start_number_list = [1,0]'
- ['']
- - 'start_interval_sec = random.uniform(1,10)'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
steps: |-
1. enable all nodes establish
summary: stress test, start one nodes first, then start others
test point 1: stress
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5003
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'start_number_list = [1,1,1,1,1,1,1,1,1,1,0]'
- ['']
- - 'start_interval_sec = random.uniform(1,5)'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
steps: |-
1. enable all nodes establish network
summary: stress test, start 10 nodes one by one, then start others
test point 1: stress
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5004
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'start_number_list = [1,2,3,4,8,0]'
- ['']
- - 'start_interval_sec = random.uniform(1,5)'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent on mesh network establish
steps: |-
1. enable all nodes establish network
summary: stress test, start [1,2,3,4,8] nodes with interval , then start others
test point 1: stress
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5005
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'allow_roots = False'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
steps: |-
1. enable all nodes establish
summary: stress test, start all nodes with allow_roots false
test point 1: stress
test point 2: mesh network establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5101
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "MNODE(0)"'
- ['']
- - 'establish_fail_time = 1200'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: stress test, destroy root after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5102
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "MNODE(0)"'
- ['']
- - 'establish_fail_time = 1200'
- ['']
- - 'destroy_mode = "power"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: stress test, power reset root after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5103
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "MNODE(0)"'
- ['']
- - 'establish_fail_time = 1200'
- ['']
- - 'destroy_mode = "power"'
- ['']
- - 'restart_mesh = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy root after network established
summary: stress test, power reset root and restart mesh after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5104
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
- - 'destroy_mode = "power"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. power reset 10 nodes after network established
summary: stress test, power reset 10 nodes after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5105
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
- - 'destroy_mode = "power"'
- ['']
- - 'restart_mesh = True'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. power reset random 10 nodes and restart after network established
summary: stress test, power reset random 10 nodes and restart after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1
- ID: MESH_EST_5106
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshNetworkDestroy
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_INIT_SWITCH
steps: |-
1. enable all nodes establish network
2. reboot random 10 nodes after network established
summary: multiple router, reboot random 10 nodes after network established
test point 1: stress
test point 2: channel switch test
test environment: SSC_T50_MESH1
- ID: MESH_EST_5107
<<: *MESH_CASE
category: Stress
cmd set:
- MeshStress/MeshEstablishTime
- *est_performance_cmd_set
- - 'destroy_nodes = "RANDOM(10)"'
- ['']
execution time: 2.0
expected result: |-
1. check the time spent
1. check the time spent
initial condition: MESH_DEINIT_STA
steps: |-
1. enable all nodes establish network
2. destroy random 10 nodes after network established
summary: stress test, destroy random 10 nodes after network established
test point 1: stress
test point 2: mesh network re-establish
test environment: SSC_T50_MESH1