esp-idf/components/freemodbus/port/portserial_m.c
Alex Lisitsyn 44444208b7 freemodbus: update poll event processing
update modbus poll event loop processing to process multiple events
2019-12-10 14:27:09 +08:00

291 lines
11 KiB
C

/* Copyright 2018 Espressif Systems (Shanghai) PTE LTD
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* FreeModbus Libary: ESP32 Port Demo Application
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* File: $Id: portserial.c,v 1.60 2013/08/13 15:07:05 Armink add Master Functions $
*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb_m.h"
#include "mbport.h"
#include "mbrtu.h"
#include "mbconfig.h"
#include <string.h>
#include "driver/uart.h"
#include "soc/dport_access.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "esp_log.h"
#include "sdkconfig.h"
#include "port_serial_master.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_BAUD_RATE_DEFAULT (115200)
#define MB_QUEUE_LENGTH (CONFIG_FMB_QUEUE_LENGTH)
#define MB_SERIAL_TASK_PRIO (CONFIG_FMB_SERIAL_TASK_PRIO)
#define MB_SERIAL_TASK_STACK_SIZE (CONFIG_FMB_SERIAL_TASK_STACK_SIZE)
#define MB_SERIAL_TOUT (3) // 3.5*8 = 28 ticks, TOUT=3 -> ~24..33 ticks
// Set buffer size for transmission
#define MB_SERIAL_BUF_SIZE (CONFIG_FMB_SERIAL_BUF_SIZE)
/* ----------------------- Static variables ---------------------------------*/
static const CHAR *TAG = "MB_MASTER_SERIAL";
// A queue to handle UART event.
static QueueHandle_t xMbUartQueue;
static TaskHandle_t xMbTaskHandle;
// The UART hardware port number
static UCHAR ucUartNumber = UART_NUM_MAX - 1;
static BOOL bRxStateEnabled = FALSE; // Receiver enabled flag
static BOOL bTxStateEnabled = FALSE; // Transmitter enabled flag
static UCHAR ucBuffer[MB_SERIAL_BUF_SIZE]; // Temporary buffer to transfer received data to modbus stack
static USHORT uiRxBufferPos = 0; // position in the receiver buffer
void vMBMasterPortSerialEnable(BOOL bRxEnable, BOOL bTxEnable)
{
// This function can be called from xMBRTUTransmitFSM() of different task
if (bTxEnable) {
bTxStateEnabled = TRUE;
} else {
bTxStateEnabled = FALSE;
}
if (bRxEnable) {
bRxStateEnabled = TRUE;
vTaskResume(xMbTaskHandle); // Resume receiver task
} else {
vTaskSuspend(xMbTaskHandle); // Block receiver task
bRxStateEnabled = FALSE;
}
}
static void vMBMasterPortSerialRxPoll(size_t xEventSize)
{
BOOL xReadStatus = TRUE;
USHORT usCnt = 0;
if (bRxStateEnabled) {
if (xEventSize > MB_SERIAL_RESP_LEN_MIN) {
xEventSize = (xEventSize > MB_SERIAL_BUF_SIZE) ? MB_SERIAL_BUF_SIZE : xEventSize;
// Get received packet into Rx buffer
USHORT usLength = uart_read_bytes(ucUartNumber, &ucBuffer[0], xEventSize, portMAX_DELAY);
uiRxBufferPos = 0;
for(usCnt = 0; xReadStatus && (usCnt < usLength); usCnt++ ) {
// Call the Modbus stack callback function and let it fill the stack buffers.
xReadStatus = pxMBMasterFrameCBByteReceived(); // callback to receive FSM state machine
}
// The buffer is transferred into Modbus stack and is not needed here any more
uart_flush_input(ucUartNumber);
ESP_LOGD(TAG, "Received data: %d(bytes in buffer)\n", (uint32_t)usCnt);
}
} else {
ESP_LOGE(TAG, "%s: bRxState disabled but junk data (%d bytes) received. ", __func__, xEventSize);
}
}
BOOL xMBMasterPortSerialTxPoll(void)
{
USHORT usCount = 0;
BOOL bNeedPoll = TRUE;
if( bTxStateEnabled ) {
// Continue while all response bytes put in buffer or out of buffer
while((bNeedPoll) && (usCount++ < MB_SERIAL_BUF_SIZE)) {
// Calls the modbus stack callback function to let it fill the UART transmit buffer.
bNeedPoll = pxMBMasterFrameCBTransmitterEmpty( ); // callback to transmit FSM state machine
}
ESP_LOGD(TAG, "MB_TX_buffer sent: (%d) bytes.", (uint16_t)(usCount - 1));
// Waits while UART sending the packet
esp_err_t xTxStatus = uart_wait_tx_done(ucUartNumber, MB_SERIAL_TX_TOUT_TICKS);
vMBMasterPortSerialEnable( TRUE, FALSE );
MB_PORT_CHECK((xTxStatus == ESP_OK), FALSE, "mb serial sent buffer failure.");
return TRUE;
}
return FALSE;
}
// UART receive event task
static void vUartTask(void* pvParameters)
{
uart_event_t xEvent;
for(;;) {
if (xQueueReceive(xMbUartQueue, (void*)&xEvent, portMAX_DELAY) == pdTRUE) {
ESP_LOGD(TAG, "MB_uart[%d] event:", ucUartNumber);
switch(xEvent.type) {
//Event of UART receiving data
case UART_DATA:
ESP_LOGD(TAG,"Receive data, len: %d.", xEvent.size);
// Read received data and send it to modbus stack
vMBMasterPortSerialRxPoll(xEvent.size);
break;
//Event of HW FIFO overflow detected
case UART_FIFO_OVF:
ESP_LOGD(TAG, "hw fifo overflow.");
xQueueReset(xMbUartQueue);
break;
//Event of UART ring buffer full
case UART_BUFFER_FULL:
ESP_LOGD(TAG, "ring buffer full.");
xQueueReset(xMbUartQueue);
uart_flush_input(ucUartNumber);
break;
//Event of UART RX break detected
case UART_BREAK:
ESP_LOGD(TAG, "uart rx break.");
break;
//Event of UART parity check error
case UART_PARITY_ERR:
ESP_LOGD(TAG, "uart parity error.");
break;
//Event of UART frame error
case UART_FRAME_ERR:
ESP_LOGD(TAG, "uart frame error.");
break;
default:
ESP_LOGD(TAG, "uart event type: %d.", xEvent.type);
break;
}
}
}
vTaskDelete(NULL);
}
/* ----------------------- Start implementation -----------------------------*/
BOOL xMBMasterPortSerialInit( UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits, eMBParity eParity )
{
esp_err_t xErr = ESP_OK;
MB_PORT_CHECK((eParity <= MB_PAR_EVEN), FALSE, "mb serial set parity failure.");
// Set communication port number
ucUartNumber = ucPORT;
// Configure serial communication parameters
UCHAR ucParity = UART_PARITY_DISABLE;
UCHAR ucData = UART_DATA_8_BITS;
switch(eParity){
case MB_PAR_NONE:
ucParity = UART_PARITY_DISABLE;
break;
case MB_PAR_ODD:
ucParity = UART_PARITY_ODD;
break;
case MB_PAR_EVEN:
ucParity = UART_PARITY_EVEN;
break;
}
switch(ucDataBits){
case 5:
ucData = UART_DATA_5_BITS;
break;
case 6:
ucData = UART_DATA_6_BITS;
break;
case 7:
ucData = UART_DATA_7_BITS;
break;
case 8:
ucData = UART_DATA_8_BITS;
break;
default:
ucData = UART_DATA_8_BITS;
break;
}
uart_config_t xUartConfig = {
.baud_rate = ulBaudRate,
.data_bits = ucData,
.parity = ucParity,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.rx_flow_ctrl_thresh = 2,
.source_clk = UART_SCLK_APB,
};
// Set UART config
xErr = uart_param_config(ucUartNumber, &xUartConfig);
MB_PORT_CHECK((xErr == ESP_OK),
FALSE, "mb config failure, uart_param_config() returned (0x%x).", xErr);
// Install UART driver, and get the queue.
xErr = uart_driver_install(ucUartNumber, MB_SERIAL_BUF_SIZE, MB_SERIAL_BUF_SIZE,
MB_QUEUE_LENGTH, &xMbUartQueue, MB_PORT_SERIAL_ISR_FLAG);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"mb serial driver failure, uart_driver_install() returned (0x%x).", xErr);
// Set timeout for TOUT interrupt (T3.5 modbus time)
xErr = uart_set_rx_timeout(ucUartNumber, MB_SERIAL_TOUT);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"mb serial set rx timeout failure, uart_set_rx_timeout() returned (0x%x).", xErr);
// Create a task to handle UART events
BaseType_t xStatus = xTaskCreate(vUartTask, "uart_queue_task", MB_SERIAL_TASK_STACK_SIZE,
NULL, MB_SERIAL_TASK_PRIO, &xMbTaskHandle);
if (xStatus != pdPASS) {
vTaskDelete(xMbTaskHandle);
// Force exit from function with failure
MB_PORT_CHECK(FALSE, FALSE,
"mb stack serial task creation error. xTaskCreate() returned (0x%x).",
xStatus);
} else {
vTaskSuspend(xMbTaskHandle); // Suspend serial task while stack is not started
}
uiRxBufferPos = 0;
ESP_LOGD(MB_PORT_TAG,"%s Init serial.", __func__);
return TRUE;
}
void vMBMasterPortSerialClose(void)
{
(void)vTaskDelete(xMbTaskHandle);
ESP_ERROR_CHECK(uart_driver_delete(ucUartNumber));
}
BOOL xMBMasterPortSerialPutByte(CHAR ucByte)
{
// Send one byte to UART transmission buffer
// This function is called by Modbus stack
UCHAR ucLength = uart_write_bytes(ucUartNumber, &ucByte, 1);
return (ucLength == 1);
}
// Get one byte from intermediate RX buffer
BOOL xMBMasterPortSerialGetByte(CHAR* pucByte)
{
assert(pucByte != NULL);
MB_PORT_CHECK((uiRxBufferPos < MB_SERIAL_BUF_SIZE),
FALSE, "mb stack serial get byte failure.");
*pucByte = ucBuffer[uiRxBufferPos];
uiRxBufferPos++;
return TRUE;
}