alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
99d572700d
esp-idf/components/bt/bluedroid/bta/dm/bta_dm_cfg.c
weitianhua e284ff818b hfp a2dp iphone 3.3
2020-01-08 19:37:51 +08:00

437 lines
21 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright (C) 2003-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains compile-time configurable constants for the device
* manager.
*
******************************************************************************/
#include <stddef.h>
#include "common/bt_target.h"
#include "bta/bta_sys.h"
#include "bta/bta_api.h"
#include "bta_dm_int.h"
#include "bta/bta_jv_api.h"
#ifndef BTA_DM_LINK_POLICY_SETTINGS
#define BTA_DM_LINK_POLICY_SETTINGS (HCI_ENABLE_MASTER_SLAVE_SWITCH | HCI_ENABLE_HOLD_MODE | HCI_ENABLE_SNIFF_MODE | HCI_ENABLE_PARK_MODE)
#endif
/* page timeout in 625uS */
#ifndef BTA_DM_PAGE_TIMEOUT
#define BTA_DM_PAGE_TIMEOUT 8192
#endif
/* link supervision timeout in 625uS (5 secs) */
#ifndef BTA_DM_LINK_TIMEOUT
#define BTA_DM_LINK_TIMEOUT 8000
#endif
/* TRUE to avoid scatternet when av is streaming (be the master) */
#ifndef BTA_DM_AVOID_SCATTER_A2DP
#define BTA_DM_AVOID_SCATTER_A2DP TRUE
#endif
/* For Insight, PM cfg lookup tables are runtime configurable (to allow tweaking of params for power consumption measurements) */
#ifndef BTE_SIM_APP
#define tBTA_DM_PM_TYPE_QUALIFIER const
#else
#define tBTA_DM_PM_TYPE_QUALIFIER
#endif
const tBTA_DM_CFG bta_dm_cfg = {
/* mobile phone COD */
BTA_DM_COD,
/* link policy settings */
BTA_DM_LINK_POLICY_SETTINGS,
/* page timeout in 625uS */
BTA_DM_PAGE_TIMEOUT,
/* link supervision timeout in 625uS*/
BTA_DM_LINK_TIMEOUT,
/* TRUE to avoid scatternet when av is streaming (be the master) */
BTA_DM_AVOID_SCATTER_A2DP
};
#ifndef BTA_DM_SCATTERNET
/* By default, allow partial scatternet */
#define BTA_DM_SCATTERNET BTA_DM_PARTIAL_SCATTERNET
#endif
#ifndef BTA_HH_ROLE
/* By default, do not specify HH role (backward compatibility) */
#define BTA_HH_ROLE BTA_ANY_ROLE
#endif
#ifndef BTA_AV_ROLE
/* By default, AV role (backward BTA_MASTER_ROLE_PREF) */
#define BTA_AV_ROLE BTA_MASTER_ROLE_PREF
#endif
#ifndef BTA_PANU_ROLE
/* By default, AV role (backward BTA_MASTER_ROLE_PREF) */
#define BTA_PANU_ROLE BTA_SLAVE_ROLE_ONLY
#endif
#define BTA_DM_NUM_RM_ENTRY 6
/* appids for PAN used by insight sample application
these have to be same as defined in btui_int.h */
#define BTUI_PAN_ID_PANU 0
#define BTUI_PAN_ID_NAP 1
#define BTUI_PAN_ID_GN 2
/* First element is always for SYS:
app_id = # of entries table, cfg is
device scatternet support */
const tBTA_DM_RM bta_dm_rm_cfg[] = {
{BTA_ID_SYS, BTA_DM_NUM_RM_ENTRY, BTA_DM_SCATTERNET},
{BTA_ID_PAN, BTUI_PAN_ID_NAP, BTA_ANY_ROLE},
{BTA_ID_PAN, BTUI_PAN_ID_GN, BTA_ANY_ROLE},
{BTA_ID_PAN, BTA_APP_ID_PAN_MULTI, BTA_MASTER_ROLE_ONLY},
{BTA_ID_PAN, BTUI_PAN_ID_PANU, BTA_PANU_ROLE},
{BTA_ID_HH, BTA_ALL_APP_ID, BTA_HH_ROLE},
{BTA_ID_AV, BTA_ALL_APP_ID, BTA_AV_ROLE}
};
tBTA_DM_CFG *p_bta_dm_cfg = (tBTA_DM_CFG *) &bta_dm_cfg;
tBTA_DM_RM *p_bta_dm_rm_cfg = (tBTA_DM_RM *) &bta_dm_rm_cfg;
#if BLE_INCLUDED == TRUE
# define BTA_DM_NUM_PM_ENTRY 8 /* number of entries in bta_dm_pm_cfg except the first */
# define BTA_DM_NUM_PM_SPEC 8 /* number of entries in bta_dm_pm_spec */
#else
# define BTA_DM_NUM_PM_ENTRY 6 /* number of entries in bta_dm_pm_cfg except the first */
# define BTA_DM_NUM_PM_SPEC 6 /* number of entries in bta_dm_pm_spec */
#endif
#if (BTA_DM_PM_INCLUDED == TRUE)
tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_CFG bta_dm_pm_cfg[BTA_DM_NUM_PM_ENTRY + 1] = {
{BTA_ID_SYS, BTA_DM_NUM_PM_ENTRY, 0}, /* reserved: specifies length of this table. */
{BTA_ID_AG, BTA_ALL_APP_ID, 0}, /* ag uses first spec table for app id 0 */
{BTA_ID_AV, BTA_ALL_APP_ID, 1}, /* av spec table */
{BTA_ID_JV, BTA_APP_ID_1, 2}, /* app BTA_JV_PM_ID_1, reuse ftc spec table */
{BTA_ID_JV, BTA_ALL_APP_ID, 3}, /* reuse fts spec table */
{BTA_ID_HS, BTA_ALL_APP_ID, 4}, /* HS spec table */
{BTA_ID_AVK, BTA_ALL_APP_ID, 5} /* avk spec table */
#if BLE_INCLUDED == TRUE
, {BTA_ID_GATTC, BTA_ALL_APP_ID, 6} /* gattc spec table */
, {BTA_ID_GATTS, BTA_ALL_APP_ID, 7} /* gatts spec table */
#endif
};
#define BTA_DM_PM_SPEC_TO_OFFSET (197) /* timeout offset to avoid conflict with other bluedroid host */
tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_SPEC bta_dm_pm_spec[BTA_DM_NUM_PM_SPEC] = {
/* AG : 0 */
{
(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF_A2DP_IDX, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_SNIFF_SCO_OPEN_IDX, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open, active */
{{BTA_DM_PM_SNIFF_A2DP_IDX, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close sniff */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_RETRY, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
},
/* AV : 1 */
{
(BTA_DM_PM_SNIFF), /* allow sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF_A2DP_IDX, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_SNIFF_A2DP_IDX, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
},
/* FTC, OPC, JV : 2 */
{
(BTA_DM_PM_SNIFF), /* allow sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF_JV_IDX, BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_SNIFF_JV_IDX, BTA_FTC_OPS_IDLE_TO_SNIFF_DELAY_MS + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
},
/* FTS, PBS, OPS, MSE, BTA_JV_PM_ID_1 : 3 */
{
(BTA_DM_PM_SNIFF), /* allow sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF_JV_IDX, BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_SNIFF_JV_IDX, BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
},
/* HS : 4 */
{
(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open, active */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close sniff */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_RETRY, 7000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
},
/* AVK : 5 */
{
(BTA_DM_PM_SNIFF), /* allow sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF, 3000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_SNIFF4, 3000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
}
#if BLE_INCLUDED == TRUE
/* GATTC : 6 */
, {
(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_SNIFF_A2DP_IDX, 10000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_SNIFF_A2DP_IDX, 10000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
#if defined(AMP_INCLUDED) && (AMP_INCLUDED == TRUE)
{{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* amp */
#endif
{{BTA_DM_PM_RETRY, 5000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
}
/* GATTS : 7 */
, {
(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */
#if (BTM_SSR_INCLUDED == TRUE)
(BTA_DM_PM_SSR2), /* the SSR entry */
#endif
{
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */
#if defined(AMP_INCLUDED) && (AMP_INCLUDED == TRUE)
{{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* amp */
#endif
{{BTA_DM_PM_RETRY, 5000 + BTA_DM_PM_SPEC_TO_OFFSET}, {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */
}
}
#endif
#ifdef BTE_SIM_APP /* For Insight builds only */
/* Entries at the end of the pm_spec table are user-defined (runtime configurable),
for power consumption experiments.
Insight finds the first user-defined entry by looking for the first BTA_DM_PM_NO_PREF.
The number of user_defined specs is defined by BTA_SWRAP_UD_PM_SPEC_COUNT */
,
{BTA_DM_PM_NO_PREF}, /* pm_spec USER_DEFINED_0 */
{BTA_DM_PM_NO_PREF} /* pm_spec USER_DEFINED_1 */
#endif /* BTE_SIM_APP */
};
/* Please refer to the SNIFF table definitions in bta/bta_api.h.
*
* Adding to or Modifying the Table
* Additional sniff parameter entries can be added for BTA_DM_PM_SNIFF5 - BTA_DM_PM_SNIFF7.
* Overrides of additional table entries can be specified in bdroid_buildcfg.h. If additional
* sniff parameter entries are added or an override of an existing entry is specified in
* bdroid_buildcfg.h then the BTA_DM_PM_*_IDX defines in bta/bta_api.h will need to be match the new
* ordering.
*
* Table Ordering
* Sniff Table entries must be ordered from highest latency (biggest interval) to lowest latency.
* If there is a conflict among the connected services the setting with the lowest latency will
* be selected.
*/
tBTA_DM_PM_TYPE_QUALIFIER tBTM_PM_PWR_MD bta_dm_pm_md[] = {
/*
* More sniff parameter entries can be added for
* BTA_DM_PM_SNIFF3 - BTA_DM_PM_SNIFF7, if needed. When entries are added or
* removed, BTA_DM_PM_PARK_IDX needs to be updated to reflect the actual index
* BTA_DM_PM_PARK_IDX is defined in bta/bta_api.h and can be override by the
* bdroid_buildcfg.h settings.
* The SNIFF table entries must be in the order from highest latency (biggest
* interval) to lowest latency. If there's a conflict among the connected
* services, the setting with lowest latency wins.
*/
/* sniff modes: max interval, min interval, attempt, timeout */
{BTA_DM_PM_SNIFF_MAX, BTA_DM_PM_SNIFF_MIN, BTA_DM_PM_SNIFF_ATTEMPT, BTA_DM_PM_SNIFF_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF - A2DP */
{BTA_DM_PM_SNIFF1_MAX, BTA_DM_PM_SNIFF1_MIN, BTA_DM_PM_SNIFF1_ATTEMPT, BTA_DM_PM_SNIFF1_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF1 */
{BTA_DM_PM_SNIFF2_MAX, BTA_DM_PM_SNIFF2_MIN, BTA_DM_PM_SNIFF2_ATTEMPT, BTA_DM_PM_SNIFF2_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF2- HD idle */
{BTA_DM_PM_SNIFF3_MAX, BTA_DM_PM_SNIFF3_MIN, BTA_DM_PM_SNIFF3_ATTEMPT, BTA_DM_PM_SNIFF3_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF3- SCO open */
{BTA_DM_PM_SNIFF4_MAX, BTA_DM_PM_SNIFF4_MIN, BTA_DM_PM_SNIFF4_ATTEMPT, BTA_DM_PM_SNIFF4_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF4- HD active */
{BTA_DM_PM_SNIFF5_MAX, BTA_DM_PM_SNIFF5_MIN, BTA_DM_PM_SNIFF5_ATTEMPT, BTA_DM_PM_SNIFF5_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF5- HD active */
{BTA_DM_PM_PARK_MAX, BTA_DM_PM_PARK_MIN, BTA_DM_PM_PARK_ATTEMPT, BTA_DM_PM_PARK_TIMEOUT, BTM_PM_MD_PARK}
#ifdef BTE_SIM_APP /* For Insight builds only */
/* Entries at the end of the bta_dm_pm_md table are user-defined (runtime configurable),
for power consumption experiments.
Insight finds the first user-defined entry by looking for the first 'max=0'.
The number of user_defined specs is defined by BTA_SWRAP_UD_PM_DM_COUNT */
,
{0}, /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_0 */
{0}, /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_0 */
{0}, /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_1 */
{0} /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_1 */
#endif /* BTE_SIM_APP */
};
/* 0=max_lat -> no SSR */
/* the smaller of the SSR max latency wins.
* the entries in this table must be from highest latency (biggest interval) to lowest latency */
#if (BTM_SSR_INCLUDED == TRUE)
tBTA_DM_SSR_SPEC bta_dm_ssr_spec[] = {
/*max_lat, min_rmt_to, min_loc_to*/
{0, 0, 0}, /* BTA_DM_PM_SSR0 - do not use SSR */
{0, 0, 2}, /* BTA_DM_PM_SSR1 - HH, can NOT share entry with any other profile,
seting default max latency and min remote timeout as 0,
and always read individual device preference from HH module */
{1200, 2, 2}, /* BTA_DM_PM_SSR2 - others (as long as sniff is allowed)*/
{360, 160, 2} /* BTA_DM_PM_SSR3 - HD */
};
tBTA_DM_SSR_SPEC *p_bta_dm_ssr_spec = (tBTA_DM_SSR_SPEC *) &bta_dm_ssr_spec;
#endif
tBTA_DM_PM_CFG *p_bta_dm_pm_cfg = (tBTA_DM_PM_CFG *) &bta_dm_pm_cfg;
tBTA_DM_PM_SPEC *p_bta_dm_pm_spec = (tBTA_DM_PM_SPEC *) &bta_dm_pm_spec;
tBTM_PM_PWR_MD *p_bta_dm_pm_md = (tBTM_PM_PWR_MD *) &bta_dm_pm_md;
#endif /* #if (BTA_DM_PM_INCLUDED == TRUE) */
/* The performance impact of EIR packet size
**
** When BTM_EIR_DEFAULT_FEC_REQUIRED is TRUE,
** 1 to 17 bytes, DM1 is used and most robust.
** 18 to 121 bytes, DM3 is used but impacts inquiry scan time with large number
** of devices.(almost double with 150 users)
** 122 to 224 bytes, DM5 is used but cause quite big performance loss even with
** small number of users. so it is not recommended.
** 225 to 240 bytes, DH5 is used without FEC but it not recommended.
** (same reason of DM5)
**
** When BTM_EIR_DEFAULT_FEC_REQUIRED is FALSE,
** 1 to 27 bytes, DH1 is used but only robust at short range.
** 28 to 183 bytes, DH3 is used but only robust at short range and impacts inquiry
** scan time with large number of devices.
** 184 to 240 bytes, DH5 is used but it not recommended.
*/
#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
/* for example */
const UINT8 bta_dm_eir_uuid16_list[] = { 0x08, 0x11, /* Headset */
0x1E, 0x11, /* Handsfree */
0x0E, 0x11, /* AV Remote Control */
0x0B, 0x11, /* Audio Sink */
};
#endif // BTA_EIR_CANNED_UUID_LIST
/* Extended Inquiry Response */
const tBTA_DM_EIR_CONF bta_dm_eir_cfg = {
50, /* minimum length of local name when it is shortened */
/* if length of local name is longer than this and EIR has not enough */
/* room for all UUID list then local name is shortened to this length */
#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
8,
(UINT8 *)bta_dm_eir_uuid16_list,
#else // BTA_EIR_CANNED_UUID_LIST
{ /* mask of UUID list in EIR */
0xFFFFFFFF, /* LSB is the first UUID of the first 32 UUIDs in BTM_EIR_UUID_LKUP_TBL */
0xFFFFFFFF /* LSB is the first UUID of the next 32 UUIDs in BTM_EIR_UUID_LKUP_TBL */
/* BTM_EIR_UUID_LKUP_TBL can be overrided */
},
#endif // BTA_EIR_CANNED_UUID_LIST
NULL, /* Inquiry TX power */
0, /* length of flags in bytes */
NULL, /* flags for EIR */
0, /* length of manufacturer specific in bytes */
NULL, /* manufacturer specific */
0, /* length of additional data in bytes */
NULL /* additional data */
};
tBTA_DM_EIR_CONF *p_bta_dm_eir_cfg = (tBTA_DM_EIR_CONF *) &bta_dm_eir_cfg;
Reference in New Issue View Git Blame Copy Permalink