esp-idf/components/hal/esp32h2/include/hal/cache_ll.h

198 lines
6.2 KiB
C

/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for Cache register operations
#pragma once
#include "soc/extmem_reg.h"
#include "soc/ext_mem_defs.h"
#include "hal/cache_types.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
#define CACHE_LL_DEFAULT_IBUS_MASK CACHE_BUS_IBUS0
#define CACHE_LL_DEFAULT_DBUS_MASK CACHE_BUS_DBUS0
#define CACHE_LL_L1_ACCESS_EVENT_MASK (0x3f)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_WR_IC (1<<5)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_REJECT (1<<4)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_ACS_MSK_IC (1<<3)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_REJECT (1<<2)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_WR_IC (1<<1)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_ACS_MSK_IC (1<<0)
#define CACHE_LL_L1_ILG_EVENT_MASK (0x23)
#define CACHE_LL_L1_ILG_EVENT_MMU_ENTRY_FAULT (1<<5)
#define CACHE_LL_L1_ILG_EVENT_PRELOAD_OP_FAULT (1<<1)
#define CACHE_LL_L1_ILG_EVENT_SYNC_OP_FAULT (1<<0)
/**
* @brief Get the buses of a particular cache that are mapped to a virtual address range
*
* External virtual address can only be accessed when the involved cache buses are enabled.
* This API is to get the cache buses where the memory region (from `vaddr_start` to `vaddr_start + len`) reside.
*
* @param cache_id cache ID (when l1 cache is per core)
* @param vaddr_start virtual address start
* @param len vaddr length
*/
#if !BOOTLOADER_BUILD
__attribute__((always_inline))
#endif
static inline cache_bus_mask_t cache_ll_l1_get_bus(uint32_t cache_id, uint32_t vaddr_start, uint32_t len)
{
HAL_ASSERT(cache_id == 0);
cache_bus_mask_t mask = 0;
uint32_t vaddr_end = vaddr_start + len - 1;
if (vaddr_start >= IRAM0_CACHE_ADDRESS_LOW && vaddr_end < IRAM0_CACHE_ADDRESS_HIGH) {
mask |= CACHE_BUS_IBUS0;
} else if (vaddr_start >= DRAM0_CACHE_ADDRESS_LOW && vaddr_end < DRAM0_CACHE_ADDRESS_HIGH) {
mask |= CACHE_BUS_DBUS0;
} else {
HAL_ASSERT(0); //Out of region
}
return mask;
}
/**
* Enable the Cache Buses
*
* @param cache_id cache ID (when l1 cache is per core)
* @param mask To know which buses should be enabled
*/
#if !BOOTLOADER_BUILD
__attribute__((always_inline))
#endif
static inline void cache_ll_l1_enable_bus(uint32_t cache_id, cache_bus_mask_t mask)
{
HAL_ASSERT(cache_id == 0);
//On esp32h2, only `CACHE_BUS_IBUS0` and `CACHE_BUS_DBUS0` are supported. Use `cache_ll_l1_get_bus()` to get your bus first
HAL_ASSERT((mask & (CACHE_BUS_IBUS1 | CACHE_BUS_IBUS2| CACHE_BUS_DBUS1 | CACHE_BUS_DBUS2)) == 0);
uint32_t ibus_mask = 0;
ibus_mask |= (mask & CACHE_BUS_IBUS0) ? EXTMEM_DCACHE_SHUT_DBUS0 : 0;
REG_CLR_BIT(EXTMEM_ICACHE_CTRL_REG, ibus_mask);
uint32_t dbus_mask = 0;
dbus_mask |= (mask & CACHE_BUS_DBUS0) ? EXTMEM_DCACHE_SHUT_DBUS1 : 0;
REG_CLR_BIT(EXTMEM_ICACHE_CTRL_REG, dbus_mask);
}
/**
* Disable the Cache Buses
*
* @param cache_id cache ID (when l1 cache is per core)
* @param mask To know which buses should be disabled
*/
__attribute__((always_inline))
static inline void cache_ll_l1_disable_bus(uint32_t cache_id, cache_bus_mask_t mask)
{
HAL_ASSERT(cache_id == 0);
//On esp32h2, only `CACHE_BUS_IBUS0` and `CACHE_BUS_DBUS0` are supported. Use `cache_ll_l1_get_bus()` to get your bus first
HAL_ASSERT((mask & (CACHE_BUS_IBUS1 | CACHE_BUS_IBUS2| CACHE_BUS_DBUS1 | CACHE_BUS_DBUS2)) == 0);
uint32_t ibus_mask = 0;
ibus_mask |= (mask & CACHE_BUS_IBUS0) ? EXTMEM_DCACHE_SHUT_DBUS0 : 0;
REG_SET_BIT(EXTMEM_ICACHE_CTRL_REG, ibus_mask);
uint32_t dbus_mask = 0;
dbus_mask |= (mask & CACHE_BUS_DBUS0) ? EXTMEM_DCACHE_SHUT_DBUS1 : 0;
REG_SET_BIT(EXTMEM_ICACHE_CTRL_REG, dbus_mask);
}
/*------------------------------------------------------------------------------
* Interrupt
*----------------------------------------------------------------------------*/
/**
* @brief Enable Cache access error interrupt
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_enable_access_error_intr(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO
// SET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_ENA_REG, mask);
}
/**
* @brief Clear Cache access error interrupt status
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_clear_access_error_intr(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO: IDF-6255
// SET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_CLR_REG, mask);
}
/**
* @brief Get Cache access error interrupt status
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*
* @return Status mask
*/
static inline uint32_t cache_ll_l1_get_access_error_intr_status(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO: IDF-6255
// return GET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_ST_REG, mask);
return 0;
}
/**
* @brief Enable Cache illegal error interrupt
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_enable_illegal_error_intr(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO: IDF-6255
// SET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_ENA_REG, mask);
}
/**
* @brief Clear Cache illegal error interrupt status
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_clear_illegal_error_intr(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO: IDF-6255
// SET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_CLR_REG, mask);
}
/**
* @brief Get Cache illegal error interrupt status
*
* @param cache_id Cache ID, not used on H2. For compabitlity
* @param mask Interrupt mask
*
* @return Status mask
*/
static inline uint32_t cache_ll_l1_get_illegal_error_intr_status(uint32_t cache_id, uint32_t mask)
{
// ESP32H2-TODO: IDF-6255
// return GET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_ST_REG, mask);
return 0;
}
#ifdef __cplusplus
}
#endif