esp-idf

mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Ivan Grokhotkov 979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized NVS is used to store PHY calibration data, WiFi configuration, and BT configuration. Previously BT examples did not call nvs_flash_init, relying on the fact that it is called during PHY init. However PHY init did not handle possible NVS initialization errors. This change moves PHY init procedure into the application, and adds diagnostic messages to BT config management routines if NVS is not initialized.		2017-07-17 21:29:50 +08:00
..
main	bt: call nvs_flash_init in examples, show error if NVS is not initialized	2017-07-17 21:29:50 +08:00
Makefile	component/bt : add uart(1/2) as HCI IO directly	2017-04-05 21:23:42 +08:00
README.rst	component/bt : add uart(1/2) as HCI IO directly	2017-04-05 21:23:42 +08:00
sdkconfig.defaults	component/bt : fix controller_hci_uart sdkconfig.defaults	2017-06-15 14:23:08 +08:00

README.rst

ESP-IDF UART HCI Controller
===========================

This is a btdm controller use UART as HCI IO. This require the UART device support RTS/CTS mandatory.
It can do the configuration of UART number and UART baudrate by menuconfig.