mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
934f741361
Created default configurations to run iperf test on all supported phys and adpated test code appropriately
45 lines
1.4 KiB
Plaintext
45 lines
1.4 KiB
Plaintext
# Increase main task stack size
|
|
CONFIG_ESP_MAIN_TASK_STACK_SIZE=7168
|
|
|
|
# Enable filesystem for console commands history storage
|
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_example.csv"
|
|
CONFIG_PARTITION_TABLE_FILENAME="partitions_example.csv"
|
|
|
|
# Enable FreeRTOS stats formatting functions, needed for 'tasks' command
|
|
CONFIG_FREERTOS_USE_TRACE_FACILITY=y
|
|
CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y
|
|
|
|
# --------------------------------
|
|
# Performance optimization options
|
|
# --------------------------------
|
|
# `lwIP` and `iperf` tasks have serial dependency to each other (i.e. `iperf` must wait for `lwIP`
|
|
# to process the packets). Therefore, you don't gain much performance improvement when running
|
|
# multi core mode. On the other hand, IRAM optimizations have greater effect for single core mode.
|
|
|
|
# Run FreeRTOS only on the first core
|
|
CONFIG_FREERTOS_UNICORE=y
|
|
|
|
# Disable watch dog
|
|
CONFIG_ESP_INT_WDT=n
|
|
CONFIG_ESP_TASK_WDT_EN=n
|
|
|
|
# Enable lwIP IRAM optimization
|
|
CONFIG_LWIP_IRAM_OPTIMIZATION=y
|
|
|
|
# Enable Ethernet IRAM optimization
|
|
CONFIG_ETH_IRAM_OPTIMIZATION=y
|
|
|
|
CONFIG_EXAMPLE_ETH_MDC_GPIO=16
|
|
CONFIG_EXAMPLE_ETH_MDIO_GPIO=17
|
|
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=-1
|
|
CONFIG_EXAMPLE_ETH_PHY_ADDR=0
|
|
|
|
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
|
CONFIG_EXAMPLE_ETH_PHY_RTL8201=y
|
|
|
|
CONFIG_ETH_RMII_CLK_INPUT=y
|
|
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
|
|
CONFIG_ETH_RMII_CLK_IN_GPIO=0
|