.. | ||
main | ||
CMakeLists.txt | ||
player.py | ||
README.md | ||
sdkconfig.defaults |
Supported Targets | ESP32-S2 | ESP32-S3 |
---|
USB Camera Example
Overview
This example demonstrates how to:
- Capture video from a USB camera using the
libuvc
library. - Stream the video over WiFi by hosting a TCP server.
The example enumerates connected camera, negotiates selected resolution together with FPS
and starts capturing video.
frame_callback
function is then invoked after receiving each frame. User can process received frame according to his needs.
Optionally, captured video can be visualized on computer with help of player.py
script located in this example.
After setting Enable streaming
menuconfig option, example will create TCP server upon start, and wait until player.py
connects to server.
Once connection is established, example streams each received frame to computer for visualization.
Notice that libuvc
selects highest possible dwMaxPayloadTransferSize
by default, so example has to manually overwrite this value to 512 bytes (maximum transfer size supported by ESP32-S2/S3).
(See the README.md file in the upper level 'examples' directory for more information about examples.)
How to Use Example
Hardware Required
This example requires any ESP32-S2 or ESP32-S3 with external PSRAM and exposed USB connector attached to USB camera. ESP module without external PSRAM will fail to initialize
Configure the project
Following configuration is needed for streaming video:
Open the project configuration menu (idf.py menuconfig
).
In the Example Connection Configuration
menu:
- Set the Wi-Fi configuration.
- Set
WiFi SSID
. - Set
WiFi Password
.
- Set
In the Example Configuration
menu:
- Set the Example configuration
Enable streaming
Optional: If you need, change the other options according to your requirements.
Additionally, player.py
python script makes use of opencv-python
and numpy
packages,
not included in idf-env
environment. Run following commands to install:
pip install opencv-python
pip install numpy
Build and Flash
Build the project and flash it to the board, then run the monitor tool to view the serial output:
Run idf.py set-target esp32s2
to set target chip.
Run idf.py -p PORT flash monitor
to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-]
.)
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
Known limitations
Having only Full Speed USB peripheral and hardware limited MPS (maximum packet size) to 512 bytes, ESP32-S2/S3 is capable of reading about 0.5 MB of data per second. When connected to Full Speed USB host, cameras normally provide resolution no larger than 640x480 pixels. Following two supported formats are the most common (both encoded in MJPEG):
- 320x240 30 FPS
- 640x480 15 FPS
Tested cameras
- Logitech C980
- CANYON CNE-CWC2
Example Output
...
Waiting for device
Device found
DEVICE CONFIGURATION (0c45:6340/ S) ---
Status: idle
VideoControl:
bcdUVC: 0x0100
VideoStreaming(1):
bEndpointAddress: 129
Formats:
MJPEGFormat(1)
bits per pixel: 0
GUID: 4d4a5047000000000000000000000000 (MJPG)
default frame: 1
aspect ratio: 0x0
interlace flags: 00
copy protect: 00
FrameDescriptor(1)
capabilities: 00
size: 640x480
bit rate: 24576000-147456000
max frame size: 614400
default interval: 1/30
interval[0]: 1/30
interval[1]: 1/25
interval[2]: 1/20
interval[3]: 1/15
interval[4]: 1/10
interval[5]: 1/5
FrameDescriptor(2)
capabilities: 00
size: 352x288
bit rate: 8110080-48660480
max frame size: 202752
default interval: 1/30
interval[0]: 1/30
interval[1]: 1/25
interval[2]: 1/20
interval[3]: 1/15
interval[4]: 1/10
interval[5]: 1/5
FrameDescriptor(3)
capabilities: 00
size: 320x240
bit rate: 6144000-36864000
max frame size: 153600
default interval: 1/30
interval[0]: 1/30
interval[1]: 1/25
interval[2]: 1/20
interval[3]: 1/15
interval[4]: 1/10
interval[5]: 1/5
FrameDescriptor(4)
capabilities: 00
size: 176x144
bit rate: 2027520-12165120
max frame size: 50688
default interval: 1/30
interval[0]: 1/30
interval[1]: 1/25
interval[2]: 1/20
interval[3]: 1/15
interval[4]: 1/10
interval[5]: 1/5
FrameDescriptor(5)
capabilities: 00
size: 160x120
bit rate: 1536000-9216000
max frame size: 38400
default interval: 1/30
interval[0]: 1/30
interval[1]: 1/25
interval[2]: 1/20
interval[3]: 1/15
interval[4]: 1/10
interval[5]: 1/5
StillFrameDescriptor
bEndPointAddress: 00
wWidth(1) = 640
wHeight(1) = 480
wWidth(2) = 352
wHeight(2) = 288
wWidth(3) = 320
wHeight(3) = 240
wWidth(4) = 176
wHeight(4) = 144
wWidth(5) = 160
wHeight(5) = 120
END DEVICE CONFIGURATION
bmHint: 0001
bFormatIndex: 1
bFrameIndex: 3
dwFrameInterval: 333333
wKeyFrameRate: 0
wPFrameRate: 0
wCompQuality: 0
wCompWindowSize: 0
wDelay: 20905
dwMaxVideoFrameSize: 153600
dwMaxPayloadTransferSize: 512
bInterfaceNumber: 1
Streaming...
I (4801) example: fps: 35, bytes per second: 170480
I (5821) example: fps: 34, bytes per second: 172448
I (6841) example: fps: 34, bytes per second: 172448
I (7871) example: fps: 34, bytes per second: 172448
I (8891) example: fps: 34, bytes per second: 172448
I (9921) example: fps: 35, bytes per second: 177520
I (10941) example: fps: 34, bytes per second: 172448
I (11961) example: fps: 34, bytes per second: 172448
I (12991) example: fps: 34, bytes per second: 172448
I (14011) example: fps: 34, bytes per second: 172448
I (15041) example: fps: 34, bytes per second: 172448
I (16061) example: fps: 34, bytes per second: 172448
I (17081) example: fps: 34, bytes per second: 172448
Done streaming.
UVC exited