esp-idf/components/idf_test/integration_test/TC_IT_TCPIP_UDP.yml
2019-01-26 13:02:04 +00:00

2053 lines
55 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

test cases:
- CI ready: 'Yes'
ID: TCPIP_UDP_0101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C BIND:ERROR
- - SSC SSC1 soc -B -t TCP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip 0.0.0.0 target_udp_port2
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上创建TCP socket3, target_udp_port1
sub module: UDP
summary: STA mode, udp bind test. use different ip, port
test environment: SSC_T1_6
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 2/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SOC SOC2 BIND <test_udp_port2> <pc_ip2>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 10
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 10
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip2> -p <test_udp_port2> -l 10
- - P SSC1 RE SEND:(\d+),OK
- P SOC2 UL 10
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上使用步骤3创建的socket1往pc_iptest_tcp_port1上发送10字节数据
5.target1上使用步骤3创建的socket1往pc_ip2test_tcp_port2上发送10字节数据
sub module: UDP
summary: STA mode, sendto test. use different ip, port
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0103
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472 -n 10 -j 20
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 14720
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没有到UDP包
6.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
6.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472*10字节数据
sub module: UDP
summary: STA mode, sendto test with different length
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0103
SDK: ESP32_IDF
Test App: SSC
allow fail: 1/5
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
sub module: UDP
summary: STA mode, sendto test with different length
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip>
- - P SSC1 NC +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND <test_udp_port2> <pc_ip2>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)STA mode, recvfrom basic test with STAM2
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104_02
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND_v6 <test_udp_port1> <pc_ip_v6>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDPv6 -i <target_ip_v6> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip_v6>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip_v6>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip_v6>
- - P SSC1 C +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND_v6 <test_udp_port2> <pc_ip2_v6>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2_v6>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_v6>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2_v6>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)STA mode, recvfrom basic test with STAM2(IPv6)
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0104_01_02
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND_v6 <test_udp_port1> <pc_ip_v6>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDPv6 -i <target_ip_v6> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1 <test_udp_port1> <target_ip_v6>
- - R SSC1 SL <sock1>+1
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip_v6>,<test_udp_port1>)
- - SOC SOC1 SENDTO 1473 <test_udp_port1> <target_ip_v6>
- - P SSC1 C +RECVFROM
- P SOC_COM C OK
- - SOC SOC2 BIND_v6 <test_udp_port2> <pc_ip2_v6>
- - R SOC_COM L OK
- - SOC SOC2 SENDTO 1472 <test_udp_port1> <target_ip_v6>
- - R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(<sock1>,<pc_ip2_v6>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
6.OK
7.OK
initial condition: STAAP2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_v6>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2_v6>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)STA mode, recvfrom basic test with STAAP2(IPv6)
test environment: SSC_T1_9
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0105
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.关闭socket1
sub module: UDP
summary: STA mode, close UDP sockets test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0106
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port3>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port4>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port5>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.ok
2.ok
3.ok
4.ok
5.ok
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip target_udp_port2
3.target1上UDP传输Bind socket3,本地ip target_udp_port3
4.target1上UDP传输Bind socket4,本地ip target_udp_port4
5.target1上UDP传输Bind socket5,本地ip target_udp_port5
sub module: UDP
summary: STA mode, create max udp socket test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0107
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(<sock1>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上查询创建socket信息
sub module: UDP
summary: STA mode, UDP get active socket info test
test environment: SSC_T1_6
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0108
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C BIND:ERROR
- - SSC SSC1 soc -B -t TCP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.ERROR
4.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip 0.0.0.0 target_udp_port2
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上创建TCP socket3, target_udp_port1
sub module: UDP
summary: AP mode, udp bind test. use different ip, port
test environment: SSC_T1_8
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0109
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC2 ip
- - R SSC2 A <ssc2_ip>:STAIP:(.+)\r\n
- - SSC SSC2 soc -B -t UDP -p <test_udp_port2>
- - R SSC2 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock2> -i <pc_ip_wifi> -p <test_udp_port1> -l 5
- - R SOC1 UL 5
- - SSC SSC1 soc -S -s <sock2> -i <ssc2_ip> -p <test_udp_port2> -l 5
- - R SSC2 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock1>,<target_ap_ip>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: T2O_1
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
3.target1上UDP传输Bind socket1,本地ip target_udp_port1
4.target1上使用步骤3创建的socket1往pc_iptest_tcp_port1上发送10字节数据
5.target1上使用步骤3创建的socket1往pc_ip2test_tcp_port2上发送10字节数据
sub module: UDP
summary: (special case)AP mode, sendto test. use different ip, port
test environment: SSC_T2_2
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0110
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM NC SOC_RECVFROM
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472 -n 10
-j 20
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 14720
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
6.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472*10字节数据
sub module: UDP
summary: AP mode, sendto test with different length
test environment: SSC_T1_7
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0110
SDK: ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1472
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 1472
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip_wifi> -p <test_udp_port1> -l 1473
- - P SSC1 RE SEND:(\d+),OK
- P SOC_COM C SOC_RECVFROM
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1字节数据
4.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1472字节数据
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送1473字节数据
sub module: UDP
summary: AP mode, sendto test with different length
test environment: SSC_T1_7
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0111
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 RE "\+JAP:CONNECTED,%%s"%%(<target_ssid>)
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC2 ip
- - R SSC2 A <ssc2_ip>:STAIP:(.+)\r\n
- - SSC SSC2 soc -B -t UDP -p <test_udp_port2>
- - R SSC2 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 5 <test_udp_port1> <target_ap_ip>
- - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock2>,<pc_ip_wifi>,<test_udp_port1>)
- - SSC SSC2 soc -S -s <sock1> -i <target_ap_ip> -p <test_udp_port1> -l 5
- - R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(<sock2>,<ssc2_ip>,<test_udp_port2>)
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK,没收到UDP包
6.OK
7.OK
initial condition: T2O_1
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.PC往8266上发送1字节数据
4.PC往8266上发送1472字节数据
5.PC往8266上发送1473字节数据
6.PC上SOC2 UDP传输bing <test_udp_port2> <pc_ip2>
7.PC往8266上发送1472字节数据
sub module: UDP
summary: (special case)AP mode, recvfrom basic test
test environment: SSC_T2_2
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0112
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.关闭socket1
sub module: UDP
summary: AP mode, close UDP sockets test
test environment: SSC_T1_8
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0113
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port2>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port3>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port4>
- - R SSC1 RE BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port5>
- - R SSC1 RE BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.ok
2.ok
3.ok
4.ok
5.ok
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上UDP传输Bind socket2,本地ip target_udp_port2
3.target1上UDP传输Bind socket3,本地ip target_udp_port3
4.target1上UDP传输Bind socket4,本地ip target_udp_port4
5.target1上UDP传输Bind socket5,本地ip target_udp_port5
sub module: UDP
summary: AP mode, create max udp socket test
test environment: SSC_T1_8
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0114
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -I
- - P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(<sock1>,<test_udp_port1>)
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.target1上UDP传输Bind socket1,本地ip target_udp_port1
2.target1上查询创建socket信息
sub module: UDP
summary: AP mode, UDP get active socket info test
test environment: SSC_T1_8
test point 1: basic function
test point 2: use UDP SAP (socket/espconn API) with different parameter
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1> -w 0
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ip>
- - ''
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC OK
5.PC OK
6.PC OK
7.PC OK
8.PC OK SOC_CLOSE=SOC1
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上关闭工作线程
4.PC往8266上发送1472字节数据
5.PC往8266上发送1472字节数据
6.PC往8266上发送1472字节数据
7.PC往8266上发送1472字节数据
8.PC往8266上发送1472字节数据
sub module: UDP
summary: STA mode, UDP recv buffer test
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: use UDP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_UDP_0202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip_wifi>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
- - SOC SOC1 SENDTO 1472 <test_udp_port1> <target_ap_ip>
- - ''
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.PC OK
5.PC OK
6.PC OK
7.PC OK
8.PC OK SOC_CLOSE=SOC1
initial condition: APM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip_wifi>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上关闭工作线程
4.PC往8266上发送1472字节数据
5.PC往8266上发送1472字节数据
6.PC往8266上发送1472字节数据
7.PC往8266上发送1472字节数据
8.PC往8266上发送1472字节数据
sub module: UDP
summary: AP mode, UDP recv buffer test
test environment: SSC_T1_7
test point 1: abnormal/special use
test point 2: use UDP SAP (socket/espconn API) in different state
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_UDP_0301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -i <target_ip> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:\d+,ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
4.断开与AP 连接
5.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
sub module: UDP
summary: do UDP send after WIFI disconnected
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0302
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 2/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 sta -D
- - P SSC1 C +QAP:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>
2.target1上UDP传输Bind socket1,本地ip target_udp_port1
3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据
4.断开与AP 连接
5.关闭建立的socket1连接
sub module: UDP
summary: "close UDP socket after WIFI \ndisconnected"
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0303
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -i <target_ip> -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),ERROR
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP
mode \n5.8266往PC上发送5字节数据"
sub module: UDP
summary: do UDP send after mode changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0304
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 op -S -o 2
- - P SSC1 C +MODE:OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.修改8266的Mode为softAP
mode \n5.关闭建立的socket1连接"
sub module: UDP
summary: close UDP socket after mode changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0305
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - NIC <pc_nic> DISABLED
- - R PC_COM C OK
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK
4.OK
5.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.PC上网卡禁止掉
\n5.关闭建立的socket1连接"
sub module: UDP
summary: close UDP socket after PC NIC disabled
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0306
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 1
- - P SSC1 RE SEND:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.关闭8266的DHCP
1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据"
sub module: UDP
summary: do UDP send after IP changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0307
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: 1/3
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SOC SOC1 BIND <test_udp_port1> <pc_ip>
- - R SOC_COM L OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -S -s <sock1> -i <pc_ip> -p <test_udp_port1> -l 5
- - P SSC1 RE SEND:(\d+),OK
- P SOC1 UL 5
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -o 1 -i 192.168.111.210
- - P SSC1 C +IP:OK
- - SSC SSC1 ip -Q -o 1
- - R SSC1 C +STAIP:192.168.111.210
- - SSC SSC1 soc -T -s <sock1>
- - R SSC1 RE CLOSE:\d+,OK
execution time: 0.0
expected result: |-
1.OK
2.OK
3.OK; PC TCP server accept 成功
4.OK
5.OK
6.OK
7.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: "1.PC上SOC1 UDP传输bing <test_udp_port1> <pc_ip>\n2.target1上UDP传输Bind socket1,本地ip
target_udp_port1\n3.target1上使用步骤2创建的socket1往pc_iptest_tcp_port1上发送5字节数据\n4.关闭8266的DHCP
1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接"
sub module: UDP
summary: close UDP socket after IP changed
test environment: SSC_T1_6
test point 1: abnormal/special use
test point 2: UDP handling abnormal event
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0401
SDK: |-
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 C +BIND:ERROR
execution time: 0.0
expected result: |-
1.OK
2.ERROR
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.target1上创建UDP socket,bind test_udp_port1
2.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option closed on UDP submodule
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_0402
SDK: ESP32_IDF
Test App: SSC_OPTION
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find esp-idf/components/lwip/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to esp-idf/SSC, run "./gen_misc_ng.sh SSC_OPTION" and "make flash", then run the test case normally
3.target1上创建UDP socket,bind test_udp_port1
4.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option opened that build two udp sockets
by binding same port on ESP32
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_0403
SDK: 8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'No'
category: Function
cmd set:
- ''
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock1>:BIND:(\d+),OK
- - SSC SSC1 soc -B -t UDP -p <test_udp_port1>
- - R SSC1 A <sock2>:BIND:(\d+),OK
execution time: 0.0
expected result: |-
1.OK
2.OK
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1.find ESP8266_RTOS_SDK/include/lwip/lwip/opt.h file, make "#define SO_REUSE 1" instead of "#define SO_REUSE 0"
2.switch to ESP8266_RTOS_SDK/third_party, run "./make_lib.sh lwip" risc,then continuely run "ll ../lib"
3.switch to ESP8266_RTOS_SDK/SSC, run "./gen_misc_rtos.sh SSC", then run the test case normally
4.target1上创建UDP socket,bind test_udp_port1
5.target1上创建UDP socket,bind test_udp_port1
sub module: UDP
summary: Test socket with so_reuseaddr option opened that build two udp sockets
by binding same port on 8266_RTOS
test environment: SSC_T1_6
test point 1: basic function
test point 2: socket test with different option
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_5001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - duplex = True
- - ''
- - conn_num = 5
- - ''
- - send_delay = 20
- - ''
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test
test environment: SSC_T2_5
test point 1: stress
test point 2: UDP stress test
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_UDP_5002
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPPacketLose
- - test_time = 5
- - dummy
- - send_len = 1460
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP loss rate on DUT Rx
test environment: SSC_T1_6
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5003
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPPacketLose
- - test_time = 5
- - dummy
- - send_len = 1460
- - ''
- - pc_send = False
- - ''
- - target_send = True
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP loss rate on DUT Tx
test environment: SSC_T1_6
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5004
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPBroadcast
- - test_time = 30
- - dummy
- - send_len = 20
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
initial condition: STAM2
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create UDP and recv data for several seconds
sub module: UDP
summary: UDP broadcase loss rate on DUT Rx
test environment: SSC_T1_6
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5005
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPMultiSTASendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 5
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 5 sta connect to softap
2. create udp socket on all sta
3. all sta do udp send/recv
sub module: UDP
summary: 1 SoftAP 5 STA, create UDP server on one STA, create UDP client on other
STA, do UDP send/recv
test environment: SSC_T6_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5006
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSTAMultiSocketSendRecv
- - send_len = 1460
- - dummy
- - test_time = 300
- - ''
- - server_echo = True
- - ''
- - sta_number = 2
- - ''
- - conn_number = 6
- - ''
- - send_delay = 500
- - ''
execution time: 5.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 2 sta connect to softap
2. create multi udp socket on all sta
3. all sta do udp send/recv
sub module: UDP
summary: 1 SoftAP 2 STA, create multi UDP socket on STA, do UDP send/recv
test environment: SSC_T3_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5007
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/SoftAPSTAUDPLose
- - test_time = 60
- - dummy
- - send_len = 1460
- - ''
- - softap_send = False
- - ''
- - sta_send = True
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1.sta connect to softAP
2.sta softAP bind UPD socket
3.sta send UDP to softAP, softAP calculate the packet lose
sub module: UDP
summary: STA connect to softAP, STA send UDP to softAP, calculate the UDP lose on
softAP
test environment: SSC_T2_5
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5008
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/SoftAPSTAUDPLose
- - test_time = 60
- - dummy
- - send_len = 1460
- - ''
- - softap_send = True
- - ''
- - sta_send = False
- - ''
- - delay = 10
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1.sta connect to softAP
2.sta softAP bind UPD socket
3.softAP send UDP to STA, STA calculate the packet lose
sub module: UDP
summary: STA connect to softAP, softAP send UDP to STA, calculate the UDP lose on
STA
test environment: SSC_T2_5
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Performance
cmd set:
- UDPStress/UDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create UDP and send data for several seconds
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Tx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5102
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Performance
cmd set:
- UDPStress/UDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. config attenuator (0-59)
2. scan AP to get AP RSSI
3. create UDP and recv data for several seconds
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Rx in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and send packet to PC for several secends
Loop for step 1-2
sub module: UDP
summary: UDP throughput Tx for Ethernet
test environment: ETH_T1_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPThroughput
- - send_len = 1460
- - dummy
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
- - test_count = 5
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket and PC send packet to DUT for several secends
Loop for step 1-2
sub module: UDP
summary: UDP throughput Rx for Ethernet
test environment: ETH_T1_1
test point 1: stress
test point 2: UDP stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_5301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/EthUDPPacketLose
- - test_time = 30
- - dummy
- - send_len = 1460
- - ''
- - pc_send = True
- - ''
- - target_send = False
- - ''
- - delay = 10
- - ''
execution time: 0.5
expected result: |-
1. succeed
2. succeed
initial condition: T1_ETH
level: Integration
module: TCPIP
steps: |-
1. DUT open eth and get ip
2. DUT band socket,PC send packet to DUT for several secends
3. DUT calculate the packet lose rate
sub module: UDP
summary: UDP loss rate on DUT Rx for Eth
test environment: ETH_T1_1
test point 1: Performance test
test point 2: UDP stress test
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5401
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = False
- - ''
- - sta_tx_enable = True
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. bind UDP socket
3. send UDP packet
4. calculate the troughput
sub module: UDP
summary: STA UDP throughput Tx while connected with softAP
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: UDP throughput
version: v1 (2016-10-18)
- CI ready: 'No'
ID: TCPIP_UDP_5402
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSoftAPSTAThroughput
- - send_len = 1460
- - dummy
- - sta_rx_enable = True
- - ''
- - sta_tx_enable = False
- - ''
- - measure_period = 15
- - ''
execution time: 1.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. STA connect softAP
2. bind UDP socket
3. send UDP packet
4. calculate the troughput
sub module: UDP
summary: STA UDP throughput Rx while connected with softAP
test environment: SSC_T2_ShieldBox2
test point 1: Performance test
test point 2: UDP throughput
version: v1 (2016-10-18)
- CI ready: 'Yes'
ID: TCPIP_UDP_5501
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPSendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - duplex = True
- ['']
- - conn_num = 5
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test with UDPSendRecvIPv6(IPv6)
test environment: SSC_T2_5
test point 1: stress
test point 2: UDP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'Yes'
ID: TCPIP_UDP_5502
SDK: 'ESP32_IDF'
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- UDPStress/UDPAPSTASendRecvIPv6
- - send_len = 1460
- [dummy]
- - test_time = 300
- ['']
- - duplex = True
- ['']
- - conn_num = 5
- ['']
- - send_delay = 20
- ['']
execution time: 12.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: T3_1
level: Integration
module: TCPIP
steps: |-
1. sta connect to softap
2. create multiple udp
3. do send/recv on all udp
sub module: UDP
summary: UDP send/recv stress test with UDPAPSTASendRecvIPv6(IPv6)
test environment: SSC_T3_1
test point 1: stress
test point 2: UDP stress test(IPv6)
version: v2 (2016-11-15)
- CI ready: 'No'
ID: TCPIP_UDP_9901
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- UDPStress/UDPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = True
- - ''
- - rx_enable = False
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Tx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput Compatibility test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_UDP_9902
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: IOT
cmd set:
- UDPStress/UDPThroughputCompatibility
- - send_len = 1460
- - dummy
- - test_times = 10
- - ''
- - tx_enable = False
- - ''
- - rx_enable = True
- - ''
- - measure_period = 30
- - ''
execution time: 2.0
expected result: |-
1. succeed
2. succeed
3. succeed
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. scan AP to get AP RSSI
2. create TCP connection and send data for several seconds
3. calculate the throughput
Loop step 1 - 3
sub module: UDP
summary: UDP throughput Rx Compatibility test in shield box
test environment: SSC_T1_ShieldBox
test point 1: performance
test point 2: UDP throughput Compatibility test
version: v1 (2016-8-15)