esp-idf/components/driver/i2s/i2s_common.c
2022-06-15 10:30:04 +08:00

1143 lines
43 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <string.h>
#include <stdbool.h>
#include "freertos/FreeRTOS.h"
#include "freertos/queue.h"
#include "freertos/task.h"
#include "sdkconfig.h"
#if CONFIG_I2S_ENABLE_DEBUG_LOG
// The local log level must be defined before including esp_log.h
// Set the maximum log level for this source file
#define LOG_LOCAL_LEVEL ESP_LOG_DEBUG
#endif
#include "esp_log.h"
#include "soc/i2s_periph.h"
#include "soc/soc_caps.h"
#include "hal/gpio_hal.h"
#include "hal/i2s_hal.h"
#if SOC_I2S_SUPPORTS_ADC_DAC
#include "hal/adc_ll.h"
#endif
#if SOC_I2S_SUPPORTS_APLL
#include "clk_ctrl_os.h"
#endif
#include "esp_private/i2s_platform.h"
#include "esp_private/periph_ctrl.h"
#include "driver/gpio.h"
#include "driver/i2s_common.h"
#include "i2s_private.h"
#include "clk_ctrl_os.h"
#include "esp_intr_alloc.h"
#include "esp_check.h"
#include "esp_attr.h"
#include "esp_rom_gpio.h"
#define I2S_DMA_BUFFER_MAX_SIZE (4092)
// If ISR handler is allowed to run whilst cache is disabled,
// Make sure all the code and related variables used by the handler are in the SRAM
#if CONFIG_I2S_ISR_IRAM_SAFE
#define I2S_INTR_ALLOC_FLAGS (ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_INTRDISABLED | ESP_INTR_FLAG_SHARED)
#define I2S_MEM_ALLOC_CAPS (MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT)
#else
#define I2S_INTR_ALLOC_FLAGS (ESP_INTR_FLAG_INTRDISABLED | ESP_INTR_FLAG_SHARED)
#define I2S_MEM_ALLOC_CAPS MALLOC_CAP_DEFAULT
#endif //CONFIG_I2S_ISR_IRAM_SAFE
#define I2S_DMA_ALLOC_CAPS (MALLOC_CAP_INTERNAL | MALLOC_CAP_DMA)
/**
* @brief Global i2s platform object
* @note For saving all the I2S related information
*/
i2s_platform_t g_i2s = {
.spinlock = (portMUX_TYPE)portMUX_INITIALIZER_UNLOCKED,
.controller[0 ... (SOC_I2S_NUM - 1)] = NULL, // groups will be lazy installed
.comp_name[0 ... (SOC_I2S_NUM - 1)] = NULL,
};
static const char *TAG = "i2s_common";
/*---------------------------------------------------------------------------
I2S Static APIs
----------------------------------------------------------------------------
Scope: This file only
----------------------------------------------------------------------------*/
static void i2s_tx_channel_start(i2s_chan_handle_t handle)
{
i2s_hal_tx_reset(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_reset((handle->dma.dma_chan));
#else
i2s_hal_tx_reset_dma(&(handle->controller->hal));
#endif
i2s_hal_tx_reset_fifo(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_start((handle->dma.dma_chan), (uint32_t) handle->dma.desc[0]);
#else
esp_intr_enable(handle->dma.dma_chan);
i2s_hal_tx_enable_intr(&(handle->controller->hal));
i2s_hal_tx_enable_dma(&(handle->controller->hal));
i2s_hal_tx_start_link(&(handle->controller->hal), (uint32_t) handle->dma.desc[0]);
#endif
i2s_hal_tx_start(&(handle->controller->hal));
}
static void i2s_rx_channel_start(i2s_chan_handle_t handle)
{
i2s_hal_rx_reset(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_reset(handle->dma.dma_chan);
#else
i2s_hal_rx_reset_dma(&(handle->controller->hal));
#endif
i2s_hal_rx_reset_fifo(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_start(handle->dma.dma_chan, (uint32_t) handle->dma.desc[0]);
#else
esp_intr_enable(handle->dma.dma_chan);
i2s_hal_rx_enable_intr(&(handle->controller->hal));
i2s_hal_rx_enable_dma(&(handle->controller->hal));
i2s_hal_rx_start_link(&(handle->controller->hal), (uint32_t) handle->dma.desc[0]);
#endif
i2s_hal_rx_start(&(handle->controller->hal));
}
static void i2s_tx_channel_stop(i2s_chan_handle_t handle)
{
i2s_hal_tx_stop(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_stop(handle->dma.dma_chan);
#else
i2s_hal_tx_stop_link(&(handle->controller->hal));
i2s_hal_tx_disable_intr(&(handle->controller->hal));
i2s_hal_tx_disable_dma(&(handle->controller->hal));
esp_intr_disable(handle->dma.dma_chan);
#endif
}
static void i2s_rx_channel_stop(i2s_chan_handle_t handle)
{
i2s_hal_rx_stop(&(handle->controller->hal));
#if SOC_GDMA_SUPPORTED
gdma_stop(handle->dma.dma_chan);
#else
i2s_hal_rx_stop_link(&(handle->controller->hal));
i2s_hal_rx_disable_intr(&(handle->controller->hal));
i2s_hal_rx_disable_dma(&(handle->controller->hal));
esp_intr_disable(handle->dma.dma_chan);
#endif
}
static esp_err_t i2s_destroy_controller_obj(i2s_controller_t **i2s_obj)
{
I2S_NULL_POINTER_CHECK(TAG, i2s_obj);
I2S_NULL_POINTER_CHECK(TAG, *i2s_obj);
ESP_RETURN_ON_FALSE(!(*i2s_obj)->rx_chan && !(*i2s_obj)->tx_chan,
ESP_ERR_INVALID_STATE, TAG,
"there still have channels under this i2s controller");
int id = (*i2s_obj)->id;
#if SOC_I2S_HW_VERSION_1
i2s_ll_enable_dma((*i2s_obj)->hal.dev, false);
#endif
free(*i2s_obj);
*i2s_obj = NULL;
return i2s_platform_release_occupation(id);
}
/**
* @brief Acquire i2s controller object
*
* @param id i2s port id
* @param search_reverse reverse the sequence of port acquirement
* set false to acquire from I2S_NUM_0 first
* set true to acquire from SOC_I2S_NUM - 1 first
* @return
* - pointer of acquired i2s controller object
*/
static i2s_controller_t *i2s_acquire_controller_obj(int id)
{
if (id < 0 || id >= SOC_I2S_NUM) {
return NULL;
}
/* pre-alloc controller object */
i2s_controller_t *pre_alloc = (i2s_controller_t *)heap_caps_calloc(1, sizeof(i2s_controller_t), I2S_MEM_ALLOC_CAPS);
if (pre_alloc == NULL) {
return NULL;
}
pre_alloc->id = id;
i2s_hal_init(&pre_alloc->hal, id);
pre_alloc->full_duplex = false;
pre_alloc->tx_chan = NULL;
pre_alloc->rx_chan = NULL;
pre_alloc->mclk = I2S_GPIO_UNUSED;
i2s_controller_t *i2s_obj = NULL;
/* Try to occupy this i2s controller */
if (i2s_platform_acquire_occupation(id, "i2s_driver") == ESP_OK) {
portENTER_CRITICAL(&g_i2s.spinlock);
i2s_obj = pre_alloc;
g_i2s.controller[id] = i2s_obj;
portEXIT_CRITICAL(&g_i2s.spinlock);
#if SOC_I2S_SUPPORTS_ADC_DAC
if (id == I2S_NUM_0) {
adc_ll_digi_set_data_source(ADC_I2S_DATA_SRC_IO_SIG);
}
#endif
} else {
free(pre_alloc);
portENTER_CRITICAL(&g_i2s.spinlock);
if (g_i2s.controller[id]) {
i2s_obj = g_i2s.controller[id];
} else {
}
portEXIT_CRITICAL(&g_i2s.spinlock);
if (i2s_obj == NULL) {
ESP_LOGE(TAG, "i2s%d might be occupied by other component", id);
}
}
return i2s_obj;
}
static inline bool i2s_take_available_channel(i2s_controller_t *i2s_obj, uint8_t chan_search_mask)
{
bool is_available = false;
#if SOC_I2S_HW_VERSION_1
/* In ESP32 and ESP32-S2, tx channel and rx channel are not totally separated
* Take both two channels in case one channel can affect another
*/
chan_search_mask = I2S_DIR_RX | I2S_DIR_TX;
#endif
portENTER_CRITICAL(&g_i2s.spinlock);
if (!(chan_search_mask & i2s_obj->chan_occupancy)) {
i2s_obj->chan_occupancy |= chan_search_mask;
is_available = true;
}
portEXIT_CRITICAL(&g_i2s.spinlock);
return is_available;
}
static esp_err_t i2s_register_channel(i2s_controller_t *i2s_obj, i2s_dir_t dir, uint32_t desc_num)
{
I2S_NULL_POINTER_CHECK(TAG, i2s_obj);
esp_err_t ret = ESP_OK;
i2s_chan_handle_t new_chan = (i2s_chan_handle_t)heap_caps_calloc(1, sizeof(struct i2s_channel_t), I2S_MEM_ALLOC_CAPS);
ESP_RETURN_ON_FALSE(new_chan, ESP_ERR_NO_MEM, TAG, "No memory for new channel");
new_chan->mode = I2S_COMM_MODE_NONE;
new_chan->role = I2S_ROLE_MASTER; // Set default role to master
new_chan->dir = dir;
new_chan->state = I2S_CHAN_STATE_REGISTER;
#if SOC_I2S_SUPPORTS_APLL
new_chan->apll_en = false;
#endif
new_chan->mode_info = NULL;
new_chan->controller = i2s_obj;
#if CONFIG_PM_ENABLE
new_chan->pm_lock = NULL; // Init in i2s_set_clock according to clock source
#endif
#if CONFIG_I2S_ISR_IRAM_SAFE
new_chan->msg_que_storage = (uint8_t *)heap_caps_calloc(desc_num - 1, sizeof(uint8_t *), I2S_MEM_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(new_chan->msg_que_storage, ESP_ERR_NO_MEM, err, TAG, "No memory for message queue storage");
new_chan->msg_que_struct = (StaticQueue_t *)heap_caps_calloc(1, sizeof(StaticQueue_t), I2S_MEM_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(new_chan->msg_que_struct, ESP_ERR_NO_MEM, err, TAG, "No memory for message queue struct");
new_chan->msg_queue = xQueueCreateStatic(desc_num - 1, sizeof(uint8_t *), new_chan->msg_que_storage, new_chan->msg_que_struct);
ESP_GOTO_ON_FALSE(new_chan->msg_queue, ESP_ERR_NO_MEM, err, TAG, "No memory for message queue");
new_chan->mutex_struct = (StaticSemaphore_t *)heap_caps_calloc(1, sizeof(StaticSemaphore_t), I2S_MEM_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(new_chan->mutex_struct, ESP_ERR_NO_MEM, err, TAG, "No memory for mutex struct");
new_chan->mutex = xSemaphoreCreateMutexStatic(new_chan->mutex_struct);
ESP_GOTO_ON_FALSE(new_chan->mutex, ESP_ERR_NO_MEM, err, TAG, "No memory for mutex");
new_chan->binary_struct = (StaticSemaphore_t *)heap_caps_calloc(1, sizeof(StaticSemaphore_t), I2S_MEM_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(new_chan->binary_struct, ESP_ERR_NO_MEM, err, TAG, "No memory for binary struct");
new_chan->binary = xSemaphoreCreateBinaryStatic(new_chan->binary_struct);
ESP_GOTO_ON_FALSE(new_chan->binary, ESP_ERR_NO_MEM, err, TAG, "No memory for binary");
#else
new_chan->msg_queue = xQueueCreate(desc_num - 1, sizeof(uint8_t *));
ESP_GOTO_ON_FALSE(new_chan->msg_queue, ESP_ERR_NO_MEM, err, TAG, "No memory for message queue");
new_chan->mutex = xSemaphoreCreateMutex();
ESP_GOTO_ON_FALSE(new_chan->mutex, ESP_ERR_NO_MEM, err, TAG, "No memory for mutex semaphore");
new_chan->binary = xSemaphoreCreateBinary();
ESP_GOTO_ON_FALSE(new_chan->binary, ESP_ERR_NO_MEM, err, TAG, "No memory for binary semaphore");
#endif
new_chan->callbacks.on_recv = NULL;
new_chan->callbacks.on_recv_q_ovf = NULL;
new_chan->callbacks.on_sent = NULL;
new_chan->callbacks.on_send_q_ovf = NULL;
new_chan->start = NULL;
new_chan->stop = NULL;
if (dir == I2S_DIR_TX) {
if (i2s_obj->tx_chan) {
i2s_del_channel(i2s_obj->tx_chan);
}
i2s_obj->tx_chan = new_chan;
} else {
if (i2s_obj->rx_chan) {
i2s_del_channel(i2s_obj->rx_chan);
}
i2s_obj->rx_chan = new_chan;
}
return ret;
err:
#if CONFIG_I2S_ISR_IRAM_SAFE
if (new_chan->msg_que_storage) {
free(new_chan->msg_que_storage);
}
if (new_chan->msg_que_struct) {
free(new_chan->msg_que_struct);
}
if (new_chan->mutex_struct) {
free(new_chan->mutex_struct);
}
if (new_chan->binary_struct) {
free(new_chan->binary_struct);
}
#endif
if (new_chan->msg_queue) {
vQueueDelete(new_chan->msg_queue);
}
if (new_chan->mutex) {
vSemaphoreDelete(new_chan->mutex);
}
if (new_chan->binary) {
vSemaphoreDelete(new_chan->binary);
}
free(new_chan);
return ret;
}
esp_err_t i2s_channel_register_event_callback(i2s_chan_handle_t handle, const i2s_event_callbacks_t *callbacks, void *user_data)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
I2S_NULL_POINTER_CHECK(TAG, callbacks);
esp_err_t ret = ESP_OK;
#if CONFIG_I2S_ISR_IRAM_SAFE
if (callbacks->on_recv) {
ESP_RETURN_ON_FALSE(esp_ptr_in_iram(callbacks->on_recv), ESP_ERR_INVALID_ARG, TAG, "on_recv callback not in IRAM");
}
if (callbacks->on_recv_q_ovf) {
ESP_RETURN_ON_FALSE(esp_ptr_in_iram(callbacks->on_recv_q_ovf), ESP_ERR_INVALID_ARG, TAG, "on_recv_q_ovf callback not in IRAM");
}
if (callbacks->on_sent) {
ESP_RETURN_ON_FALSE(esp_ptr_in_iram(callbacks->on_sent), ESP_ERR_INVALID_ARG, TAG, "on_sent callback not in IRAM");
}
if (callbacks->on_send_q_ovf) {
ESP_RETURN_ON_FALSE(esp_ptr_in_iram(callbacks->on_send_q_ovf), ESP_ERR_INVALID_ARG, TAG, "on_send_q_ovf callback not in IRAM");
}
if (user_data) {
ESP_RETURN_ON_FALSE(esp_ptr_internal(user_data), ESP_ERR_INVALID_ARG, TAG, "user context not in internal RAM");
}
#endif
xSemaphoreTake(handle->mutex, portMAX_DELAY);
ESP_GOTO_ON_FALSE(handle->state < I2S_CHAN_STATE_RUNNING, ESP_ERR_INVALID_STATE, err, TAG, "invalid state, I2S has enabled");
memcpy(&(handle->callbacks), callbacks, sizeof(i2s_event_callbacks_t));
handle->user_data = user_data;
err:
xSemaphoreGive(handle->mutex);
return ret;
}
uint32_t i2s_get_buf_size(i2s_chan_handle_t handle, uint32_t data_bit_width, uint32_t dma_frame_num)
{
uint32_t active_chan = handle->active_slot;
uint32_t bytes_per_sample = ((data_bit_width + 15) / 16) * 2;
uint32_t bytes_per_frame = bytes_per_sample * active_chan;
uint32_t bufsize = dma_frame_num * bytes_per_frame;
/* Limit DMA buffer size if it is out of range (DMA buffer limitation is 4092 bytes) */
if (bufsize > I2S_DMA_BUFFER_MAX_SIZE) {
uint32_t frame_num = I2S_DMA_BUFFER_MAX_SIZE / bytes_per_frame;
bufsize = frame_num * bytes_per_frame;
ESP_LOGW(TAG, "dma frame num is out of dma buffer size, limited to %d", frame_num);
}
return bufsize;
}
esp_err_t i2s_free_dma_desc(i2s_chan_handle_t handle)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
if (!handle->dma.desc) {
return ESP_OK;
}
for (int i = 0; i < handle->dma.desc_num; i++) {
if (handle->dma.bufs[i]) {
free(handle->dma.bufs[i]);
}
if (handle->dma.desc[i]) {
free(handle->dma.desc[i]);
}
}
if (handle->dma.bufs) {
free(handle->dma.bufs);
}
if (handle->dma.desc) {
free(handle->dma.desc);
}
handle->dma.desc = NULL;
return ESP_OK;
}
esp_err_t i2s_alloc_dma_desc(i2s_chan_handle_t handle, uint32_t num, uint32_t bufsize)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
esp_err_t ret = ESP_OK;
ESP_RETURN_ON_FALSE(bufsize <= I2S_DMA_BUFFER_MAX_SIZE, ESP_ERR_INVALID_ARG, TAG, "dma buffer can't be bigger than %d", I2S_DMA_BUFFER_MAX_SIZE);
handle->dma.desc_num = num;
handle->dma.buf_size = bufsize;
handle->dma.desc = (lldesc_t **)heap_caps_calloc(num, sizeof(lldesc_t *), I2S_MEM_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(handle->dma.desc, ESP_ERR_NO_MEM, err, TAG, "create I2S DMA decriptor array failed");
handle->dma.bufs = (uint8_t **)heap_caps_calloc(num, sizeof(uint8_t *), I2S_MEM_ALLOC_CAPS);
for (int i = 0; i < num; i++) {
/* Allocate DMA descriptor */
handle->dma.desc[i] = (lldesc_t *) heap_caps_calloc(1, sizeof(lldesc_t), I2S_DMA_ALLOC_CAPS);
ESP_GOTO_ON_FALSE(handle->dma.desc[i], ESP_ERR_NO_MEM, err, TAG, "allocate DMA description failed");
handle->dma.desc[i]->owner = 1;
handle->dma.desc[i]->eof = 1;
handle->dma.desc[i]->sosf = 0;
handle->dma.desc[i]->length = bufsize;
handle->dma.desc[i]->size = bufsize;
handle->dma.desc[i]->offset = 0;
handle->dma.bufs[i] = (uint8_t *) heap_caps_calloc(1, bufsize * sizeof(uint8_t), I2S_DMA_ALLOC_CAPS);
handle->dma.desc[i]->buf = handle->dma.bufs[i];
ESP_GOTO_ON_FALSE(handle->dma.desc[i]->buf, ESP_ERR_NO_MEM, err, TAG, "allocate DMA buffer failed");
}
/* Connect DMA descriptor as a circle */
for (int i = 0; i < num; i++) {
/* Link to the next descriptor */
handle->dma.desc[i]->empty = (uint32_t)((i < (num - 1)) ? (handle->dma.desc[i + 1]) : handle->dma.desc[0]);
}
if (handle->dir == I2S_DIR_RX) {
i2s_ll_rx_set_eof_num(handle->controller->hal.dev, bufsize);
}
ESP_LOGD(TAG, "DMA malloc info: dma_desc_num = %d, dma_desc_buf_size = dma_frame_num * slot_num * data_bit_width = %d, ", num, bufsize);
return ESP_OK;
err:
i2s_free_dma_desc(handle);
return ret;
}
#if SOC_I2S_SUPPORTS_APLL
uint32_t i2s_set_get_apll_freq(uint32_t mclk_freq_hz)
{
/* Calculate the expected APLL */
int mclk_div = (int)((SOC_APLL_MIN_HZ / mclk_freq_hz) + 1);
/* apll_freq = mclk * div
* when div = 1, hardware will still divide 2
* when div = 0, the final mclk will be unpredictable
* So the div here should be at least 2 */
mclk_div = mclk_div < 2 ? 2 : mclk_div;
uint32_t expt_freq = mclk_freq_hz * mclk_div;
uint32_t real_freq = 0;
esp_err_t ret = periph_rtc_apll_freq_set(expt_freq, &real_freq);
if (ret == ESP_ERR_INVALID_ARG) {
ESP_LOGE(TAG, "set APLL freq failed due to invalid argument");
return 0;
}
if (ret == ESP_ERR_INVALID_STATE) {
ESP_LOGW(TAG, "APLL is occupied already, it is working at %d Hz while the expected frequency is %d Hz", real_freq, expt_freq);
ESP_LOGW(TAG, "Trying to work at %d Hz...", real_freq);
}
ESP_LOGD(TAG, "APLL expected frequency is %d Hz, real frequency is %d Hz", expt_freq, real_freq);
return real_freq;
}
#endif
#if SOC_GDMA_SUPPORTED
static bool IRAM_ATTR i2s_dma_rx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
{
i2s_chan_handle_t handle = (i2s_chan_handle_t)user_data;
portBASE_TYPE need_yield1 = 0;
portBASE_TYPE need_yield2 = 0;
portBASE_TYPE user_need_yield = 0;
lldesc_t *finish_desc;
uint32_t dummy;
finish_desc = (lldesc_t *)event_data->rx_eof_desc_addr;
i2s_event_data_t evt = {
.data = &(finish_desc->buf),
.size = handle->dma.buf_size,
};
if (handle->callbacks.on_recv) {
user_need_yield |= handle->callbacks.on_recv(handle, &evt, handle->user_data);
}
if (xQueueIsQueueFullFromISR(handle->msg_queue)) {
xQueueReceiveFromISR(handle->msg_queue, &dummy, &need_yield1);
if (handle->callbacks.on_recv_q_ovf) {
evt.data = NULL;
user_need_yield |= handle->callbacks.on_recv_q_ovf(handle, &evt, handle->user_data);
}
}
xQueueSendFromISR(handle->msg_queue, &(finish_desc->buf), &need_yield2);
return need_yield1 | need_yield2 | user_need_yield;
}
static bool IRAM_ATTR i2s_dma_tx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
{
i2s_chan_handle_t handle = (i2s_chan_handle_t)user_data;
portBASE_TYPE need_yield1 = 0;
portBASE_TYPE need_yield2 = 0;
portBASE_TYPE user_need_yield = 0;
lldesc_t *finish_desc;
uint32_t dummy;
finish_desc = (lldesc_t *)(event_data->tx_eof_desc_addr);
i2s_event_data_t evt = {
.data = &(finish_desc->buf),
.size = handle->dma.buf_size,
};
if (handle->callbacks.on_sent) {
user_need_yield |= handle->callbacks.on_sent(handle, &evt, handle->user_data);
}
if (xQueueIsQueueFullFromISR(handle->msg_queue)) {
xQueueReceiveFromISR(handle->msg_queue, &dummy, &need_yield1);
if (handle->callbacks.on_send_q_ovf) {
evt.data = NULL;
user_need_yield |= handle->callbacks.on_send_q_ovf(handle, &evt, handle->user_data);
}
}
xQueueSendFromISR(handle->msg_queue, &(finish_desc->buf), &need_yield2);
if (handle->dma.auto_clear) {
uint8_t *sent_buf = (uint8_t *)finish_desc->buf;
memset(sent_buf, 0, handle->dma.buf_size);
}
return need_yield1 | need_yield2 | user_need_yield;
}
#else
static void IRAM_ATTR i2s_dma_rx_callback(void *arg)
{
portBASE_TYPE need_yield1 = 0;
portBASE_TYPE need_yield2 = 0;
portBASE_TYPE user_need_yield = 0;
lldesc_t *finish_desc = NULL;
i2s_event_data_t evt;
i2s_chan_handle_t handle = (i2s_chan_handle_t)arg;
uint32_t dummy;
uint32_t status = i2s_hal_get_intr_status(&(handle->controller->hal));
i2s_hal_clear_intr_status(&(handle->controller->hal), status);
if (!status) {
return;
}
if (handle && (status & I2S_LL_EVENT_RX_EOF)) {
i2s_hal_get_in_eof_des_addr(&(handle->controller->hal), (uint32_t *)&finish_desc);
evt.data = &(finish_desc->buf);
evt.size = handle->dma.buf_size;
if (handle->callbacks.on_recv) {
user_need_yield |= handle->callbacks.on_recv(handle, &evt, handle->user_data);
}
if (xQueueIsQueueFullFromISR(handle->msg_queue)) {
xQueueReceiveFromISR(handle->msg_queue, &dummy, &need_yield1);
if (handle->callbacks.on_recv_q_ovf) {
evt.data = NULL;
user_need_yield |= handle->callbacks.on_recv_q_ovf(handle, &evt, handle->user_data);
}
}
xQueueSendFromISR(handle->msg_queue, &(finish_desc->buf), &need_yield2);
}
if (need_yield1 || need_yield2 || user_need_yield) {
portYIELD_FROM_ISR();
}
}
static void IRAM_ATTR i2s_dma_tx_callback(void *arg)
{
portBASE_TYPE need_yield1 = 0;
portBASE_TYPE need_yield2 = 0;
portBASE_TYPE user_need_yield = 0;
lldesc_t *finish_desc = NULL;
i2s_event_data_t evt;
i2s_chan_handle_t handle = (i2s_chan_handle_t)arg;
uint32_t dummy;
uint32_t status = i2s_hal_get_intr_status(&(handle->controller->hal));
i2s_hal_clear_intr_status(&(handle->controller->hal), status);
if (!status) {
return;
}
if (handle && (status & I2S_LL_EVENT_TX_EOF)) {
i2s_hal_get_out_eof_des_addr(&(handle->controller->hal), (uint32_t *)&finish_desc);
evt.data = &(finish_desc->buf);
evt.size = handle->dma.buf_size;
if (handle->callbacks.on_sent) {
user_need_yield |= handle->callbacks.on_sent(handle, &evt, handle->user_data);
}
if (xQueueIsQueueFullFromISR(handle->msg_queue)) {
xQueueReceiveFromISR(handle->msg_queue, &dummy, &need_yield1);
if (handle->callbacks.on_send_q_ovf) {
evt.data = NULL;
user_need_yield |= handle->callbacks.on_send_q_ovf(handle, &evt, handle->user_data);
}
}
xQueueSendFromISR(handle->msg_queue, &(finish_desc->buf), &need_yield2);
// Auto clear the dma buffer after data sent
if (handle->dma.auto_clear) {
uint8_t *buff = (uint8_t *)finish_desc->buf;
memset(buff, 0, handle->dma.buf_size);
}
}
if (need_yield1 || need_yield2 || user_need_yield) {
portYIELD_FROM_ISR();
}
}
#endif
/**
* @brief I2S DMA interrupt initialization
* @note I2S will use GDMA if chip supports, and the interrupt is triggered by GDMA.
*
* @param handle I2S channel handle
* @param intr_flag Interrupt allocation flag
* @return
* - ESP_OK I2S DMA interrupt initialize success
* - ESP_ERR_NOT_FOUND GDMA channel not found
* - ESP_ERR_INVALID_ARG Invalid arguments
* - ESP_ERR_INVALID_STATE GDMA state error
*/
esp_err_t i2s_init_dma_intr(i2s_chan_handle_t handle, int intr_flag)
{
i2s_port_t port_id = handle->controller->id;
ESP_RETURN_ON_FALSE((port_id >= 0) && (port_id < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "invalid handle");
#if SOC_GDMA_SUPPORTED
/* Set GDMA trigger module */
gdma_trigger_t trig = {.periph = GDMA_TRIG_PERIPH_I2S};
switch (port_id) {
#if SOC_I2S_NUM > 1
case I2S_NUM_1:
trig.instance_id = SOC_GDMA_TRIG_PERIPH_I2S1;
break;
#endif
default:
trig.instance_id = SOC_GDMA_TRIG_PERIPH_I2S0;
break;
}
/* Set GDMA config */
gdma_channel_alloc_config_t dma_cfg = {};
if (handle->dir == I2S_DIR_TX) {
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_TX;
/* Register a new GDMA tx channel */
ESP_RETURN_ON_ERROR(gdma_new_channel(&dma_cfg, &handle->dma.dma_chan), TAG, "Register tx dma channel error");
ESP_RETURN_ON_ERROR(gdma_connect(handle->dma.dma_chan, trig), TAG, "Connect tx dma channel error");
gdma_tx_event_callbacks_t cb = {.on_trans_eof = i2s_dma_tx_callback};
/* Set callback function for GDMA, the interrupt is triggered by GDMA, then the GDMA ISR will call the callback function */
gdma_register_tx_event_callbacks(handle->dma.dma_chan, &cb, handle);
} else {
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_RX;
/* Register a new GDMA rx channel */
ESP_RETURN_ON_ERROR(gdma_new_channel(&dma_cfg, &handle->dma.dma_chan), TAG, "Register rx dma channel error");
ESP_RETURN_ON_ERROR(gdma_connect(handle->dma.dma_chan, trig), TAG, "Connect rx dma channel error");
gdma_rx_event_callbacks_t cb = {.on_recv_eof = i2s_dma_rx_callback};
/* Set callback function for GDMA, the interrupt is triggered by GDMA, then the GDMA ISR will call the callback function */
gdma_register_rx_event_callbacks(handle->dma.dma_chan, &cb, handle);
}
#else
intr_flag |= ESP_INTR_FLAG_SHARED;
/* Initialize I2S module interrupt */
if (handle->dir == I2S_DIR_TX) {
esp_intr_alloc_intrstatus(i2s_periph_signal[port_id].irq, intr_flag,
(uint32_t)i2s_ll_get_interrupt_status_reg(handle->controller->hal.dev), I2S_LL_TX_EVENT_MASK,
i2s_dma_tx_callback, handle, &handle->dma.dma_chan);
} else {
esp_intr_alloc_intrstatus(i2s_periph_signal[port_id].irq, intr_flag,
(uint32_t)i2s_ll_get_interrupt_status_reg(handle->controller->hal.dev), I2S_LL_RX_EVENT_MASK,
i2s_dma_rx_callback, handle, &handle->dma.dma_chan);
}
/* Start DMA */
i2s_ll_enable_dma(handle->controller->hal.dev, true);
#endif // SOC_GDMA_SUPPORTED
return ESP_OK;
}
void i2s_gpio_check_and_set(gpio_num_t gpio, uint32_t signal_idx, bool is_input, bool is_invert)
{
/* Ignore the pin if pin = I2S_GPIO_UNUSED */
if (gpio != I2S_GPIO_UNUSED) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
if (is_input) {
/* Set direction, for some GPIOs, the input function are not enabled as default */
gpio_set_direction(gpio, GPIO_MODE_INPUT);
esp_rom_gpio_connect_in_signal(gpio, signal_idx, is_invert);
} else {
gpio_set_direction(gpio, GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(gpio, signal_idx, is_invert, 0);
}
}
}
void i2s_gpio_loopback_set(gpio_num_t gpio, uint32_t out_sig_idx, uint32_t in_sig_idx)
{
if (gpio != I2S_GPIO_UNUSED) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
gpio_set_direction(gpio, GPIO_MODE_INPUT_OUTPUT);
esp_rom_gpio_connect_out_signal(gpio, out_sig_idx, 0, 0);
esp_rom_gpio_connect_in_signal(gpio, in_sig_idx, 0);
}
}
esp_err_t i2s_check_set_mclk(i2s_port_t id, gpio_num_t gpio_num, bool is_apll, bool is_invert)
{
if (gpio_num == I2S_GPIO_UNUSED) {
return ESP_OK;
}
#if CONFIG_IDF_TARGET_ESP32
ESP_RETURN_ON_FALSE((gpio_num == GPIO_NUM_0 || gpio_num == GPIO_NUM_1 || gpio_num == GPIO_NUM_3),
ESP_ERR_INVALID_ARG, TAG,
"ESP32 only support to set GPIO0/GPIO1/GPIO3 as mclk signal, error GPIO number:%d", gpio_num);
bool is_i2s0 = id == I2S_NUM_0;
if (gpio_num == GPIO_NUM_0) {
gpio_hal_iomux_func_sel(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0_CLK_OUT1);
gpio_ll_iomux_pin_ctrl(is_apll ? 0xFFF6 : (is_i2s0 ? 0xFFF0 : 0xFFFF));
} else if (gpio_num == GPIO_NUM_1) {
gpio_hal_iomux_func_sel(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_CLK_OUT3);
gpio_ll_iomux_pin_ctrl(is_apll ? 0xF6F6 : (is_i2s0 ? 0xF0F0 : 0xF0FF));
} else {
gpio_hal_iomux_func_sel(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_CLK_OUT2);
gpio_ll_iomux_pin_ctrl(is_apll ? 0xFF66 : (is_i2s0 ? 0xFF00 : 0xFF0F));
}
#else
ESP_RETURN_ON_FALSE(GPIO_IS_VALID_GPIO(gpio_num), ESP_ERR_INVALID_ARG, TAG, "mck_io_num invalid");
i2s_gpio_check_and_set(gpio_num, i2s_periph_signal[id].mck_out_sig, false, is_invert);
#endif
ESP_LOGD(TAG, "MCLK is pinned to GPIO%d on I2S%d", id, gpio_num);
return ESP_OK;
}
/*---------------------------------------------------------------------------
I2S bus Public APIs
----------------------------------------------------------------------------
Scope: Public
----------------------------------------------------------------------------*/
esp_err_t i2s_new_channel(const i2s_chan_config_t *chan_cfg, i2s_chan_handle_t *tx_handle, i2s_chan_handle_t *rx_handle)
{
#if CONFIG_I2S_ENABLE_DEBUG_LOG
esp_log_level_set(TAG, ESP_LOG_DEBUG);
#endif
/* Parameter validity check */
I2S_NULL_POINTER_CHECK(TAG, chan_cfg);
I2S_NULL_POINTER_CHECK(TAG, tx_handle || rx_handle);
ESP_RETURN_ON_FALSE(chan_cfg->id < SOC_I2S_NUM || chan_cfg->id == I2S_NUM_AUTO, ESP_ERR_INVALID_ARG, TAG, "invalid I2S port id");
ESP_RETURN_ON_FALSE(chan_cfg->dma_desc_num >= 2, ESP_ERR_INVALID_ARG, TAG, "there should be at least 2 DMA buffers");
esp_err_t ret = ESP_OK;
i2s_controller_t *i2s_obj = NULL;
i2s_port_t id = chan_cfg->id;
bool channel_found = false;
uint8_t chan_search_mask = 0;
chan_search_mask |= tx_handle ? I2S_DIR_TX : 0;
chan_search_mask |= rx_handle ? I2S_DIR_RX : 0;
/* Channel will be registered to one i2s port automatically if id is I2S_NUM_AUTO
* Otherwise, the channel will be registered to the specific port. */
if (id == I2S_NUM_AUTO) {
for (int i = 0; i < SOC_I2S_NUM && !channel_found; i++) {
i2s_obj = i2s_acquire_controller_obj(i);
if (!i2s_obj) {
continue;
}
channel_found = i2s_take_available_channel(i2s_obj, chan_search_mask);
}
ESP_RETURN_ON_FALSE(i2s_obj, ESP_ERR_NOT_FOUND, TAG, "get i2s object failed");
} else {
i2s_obj = i2s_acquire_controller_obj(id);
ESP_RETURN_ON_FALSE(i2s_obj, ESP_ERR_NOT_FOUND, TAG, "get i2s object failed");
channel_found = i2s_take_available_channel(i2s_obj, chan_search_mask);
}
ESP_GOTO_ON_FALSE(channel_found, ESP_ERR_NOT_FOUND, err, TAG, "no available channel found");
/* Register and specify the tx handle */
if (tx_handle) {
ESP_GOTO_ON_ERROR(i2s_register_channel(i2s_obj, I2S_DIR_TX, chan_cfg->dma_desc_num),
err, TAG, "register I2S tx channel failed");
i2s_obj->tx_chan->role = chan_cfg->role;
i2s_obj->tx_chan->dma.auto_clear = chan_cfg->auto_clear;
i2s_obj->tx_chan->dma.desc_num = chan_cfg->dma_desc_num;
i2s_obj->tx_chan->dma.frame_num = chan_cfg->dma_frame_num;
i2s_obj->tx_chan->start = i2s_tx_channel_start;
i2s_obj->tx_chan->stop = i2s_tx_channel_stop;
*tx_handle = i2s_obj->tx_chan;
ESP_LOGD(TAG, "tx channel is registered on I2S%d successfully", i2s_obj->id);
}
/* Register and specify the rx handle */
if (rx_handle) {
ESP_GOTO_ON_ERROR(i2s_register_channel(i2s_obj, I2S_DIR_RX, chan_cfg->dma_desc_num),
err, TAG, "register I2S rx channel failed");
i2s_obj->rx_chan->role = chan_cfg->role;
i2s_obj->rx_chan->dma.desc_num = chan_cfg->dma_desc_num;
i2s_obj->rx_chan->dma.frame_num = chan_cfg->dma_frame_num;
i2s_obj->rx_chan->start = i2s_rx_channel_start;
i2s_obj->rx_chan->stop = i2s_rx_channel_stop;
*rx_handle = i2s_obj->rx_chan;
ESP_LOGD(TAG, "rx channel is registered on I2S%d successfully", i2s_obj->id);
}
if ((tx_handle != NULL) && (rx_handle != NULL)) {
i2s_obj->full_duplex = true;
}
return ESP_OK;
/* i2s_obj allocated but register channel failed */
err:
/* if the controller object has no channel, find the corresponding global object and destroy it */
if (i2s_obj != NULL && i2s_obj->rx_chan == NULL && i2s_obj->tx_chan == NULL) {
for (int i = 0; i < SOC_I2S_NUM; i++) {
if (i2s_obj == g_i2s.controller[i]) {
i2s_destroy_controller_obj(&g_i2s.controller[i]);
break;
}
}
}
return ret;
}
esp_err_t i2s_del_channel(i2s_chan_handle_t handle)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
ESP_RETURN_ON_FALSE(handle->state < I2S_CHAN_STATE_RUNNING, ESP_ERR_INVALID_STATE, TAG, "the channel can't be deleted unless it is disabled");
i2s_controller_t *i2s_obj = handle->controller;
int __attribute__((unused)) id = i2s_obj->id;
i2s_dir_t __attribute__((unused)) dir = handle->dir;
bool is_bound = true;
#if SOC_I2S_HW_VERSION_2
if (dir == I2S_DIR_TX) {
i2s_ll_tx_disable_clock(handle->controller->hal.dev);
} else {
i2s_ll_rx_disable_clock(handle->controller->hal.dev);
}
#endif
#if SOC_I2S_SUPPORTS_APLL
if (handle->apll_en) {
/* Must switch back to D2CLK on ESP32-S2,
* because the clock of some registers are bound to APLL,
* otherwise, once APLL is disabled, the registers can't be updated anymore */
if (handle->dir == I2S_DIR_TX) {
i2s_ll_tx_clk_set_src(handle->controller->hal.dev, I2S_CLK_SRC_DEFAULT);
} else {
i2s_ll_rx_clk_set_src(handle->controller->hal.dev, I2S_CLK_SRC_DEFAULT);
}
periph_rtc_apll_release();
}
#endif
#if CONFIG_PM_ENABLE
if (handle->pm_lock) {
esp_pm_lock_delete(handle->pm_lock);
}
#endif
if (handle->mode_info) {
free(handle->mode_info);
}
if (handle->dma.desc) {
i2s_free_dma_desc(handle);
}
#if CONFIG_I2S_ISR_IRAM_SAFE
if (handle->msg_que_storage) {
free(handle->msg_que_storage);
}
if (handle->msg_que_struct) {
free(handle->msg_que_struct);
}
if (handle->mutex) {
free(handle->mutex_struct);
}
if (handle->binary_struct) {
free(handle->binary_struct);
}
#endif
if (handle->msg_queue) {
vQueueDelete(handle->msg_queue);
}
if (handle->mutex) {
vSemaphoreDelete(handle->mutex);
}
if (handle->binary) {
vSemaphoreDelete(handle->binary);
}
#if SOC_I2S_HW_VERSION_1
i2s_obj->chan_occupancy = 0;
#else
i2s_obj->chan_occupancy &= ~(uint32_t)dir;
#endif
if (handle->dma.dma_chan) {
#if SOC_GDMA_SUPPORTED
gdma_del_channel(handle->dma.dma_chan);
#else
esp_intr_free(handle->dma.dma_chan);
#endif
}
if (handle == i2s_obj->tx_chan) {
free(i2s_obj->tx_chan);
i2s_obj->tx_chan = NULL;
i2s_obj->full_duplex = false;
} else if (handle == i2s_obj->rx_chan) {
free(i2s_obj->rx_chan);
i2s_obj->rx_chan = NULL;
i2s_obj->full_duplex = false;
} else {
/* Indicate the delete channel is an unbound free channel */
is_bound = false;
free(handle);
}
/* If the delete channel was bound to a controller before,
we need to destroy this controller object if there is no channel any more */
if (is_bound) {
if (!(i2s_obj->tx_chan) && !(i2s_obj->rx_chan)) {
i2s_destroy_controller_obj(&g_i2s.controller[i2s_obj->id]);
}
ESP_LOGD(TAG, "%s channel on I2S%d deleted", dir == I2S_DIR_TX ? "tx" : "rx", id);
}
return ESP_OK;
}
esp_err_t i2s_channel_get_info(i2s_chan_handle_t handle, i2s_chan_info_t *chan_info)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
I2S_NULL_POINTER_CHECK(TAG, chan_info);
/* Find whether the handle is a registered i2s handle or still available */
for (int i = 0; i < SOC_I2S_NUM; i++) {
if (g_i2s.controller[i] != NULL) {
if (g_i2s.controller[i]->tx_chan == handle ||
g_i2s.controller[i]->rx_chan == handle) {
goto found;
}
}
}
return ESP_ERR_NOT_FOUND;
found:
/* Assign the handle information */
xSemaphoreTake(handle->mutex, portMAX_DELAY);
chan_info->id = handle->controller->id;
chan_info->dir = handle->dir;
chan_info->role = handle->role;
chan_info->mode = handle->mode;
if (handle->controller->full_duplex) {
if (handle->dir == I2S_DIR_TX) {
chan_info->pair_chan = handle->controller->rx_chan;
} else {
chan_info->pair_chan = handle->controller->tx_chan;
}
} else {
chan_info->pair_chan = NULL;
}
xSemaphoreGive(handle->mutex);
return ESP_OK;
}
esp_err_t i2s_channel_enable(i2s_chan_handle_t handle)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
esp_err_t ret = ESP_OK;
xSemaphoreTake(handle->mutex, portMAX_DELAY);
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "the channel has already enabled or not initialized");
#if CONFIG_PM_ENABLE
esp_pm_lock_acquire(handle->pm_lock);
#endif
handle->dma.curr_ptr = NULL;
handle->dma.rw_pos = 0;
handle->start(handle);
handle->state = I2S_CHAN_STATE_RUNNING;
/* Reset queue */
xQueueReset(handle->msg_queue);
xSemaphoreGive(handle->mutex);
/* Give the binary semaphore to enable reading / writing task */
xSemaphoreGive(handle->binary);
ESP_LOGD(TAG, "i2s %s channel enabled", handle->dir == I2S_DIR_TX ? "tx" : "rx");
return ret;
err:
xSemaphoreGive(handle->mutex);
return ret;
}
esp_err_t i2s_channel_disable(i2s_chan_handle_t handle)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
esp_err_t ret = ESP_OK;
xSemaphoreTake(handle->mutex, portMAX_DELAY);
ESP_GOTO_ON_FALSE(handle->state > I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "the channel has not been enabled yet");
/* Update the state to force quit the current reading/wrinting operation */
handle->state = I2S_CHAN_STATE_READY;
/* Waiting for reading/wrinting operation quit */
xSemaphoreTake(handle->binary, portMAX_DELAY);
handle->stop(handle);
#if CONFIG_PM_ENABLE
esp_pm_lock_release(handle->pm_lock);
#endif
xSemaphoreGive(handle->mutex);
ESP_LOGD(TAG, "i2s %s channel disabled", handle->dir == I2S_DIR_TX ? "tx" : "rx");
return ret;
err:
xSemaphoreGive(handle->mutex);
return ret;
}
esp_err_t i2s_channel_write(i2s_chan_handle_t handle, const void *src, size_t size, size_t *bytes_written, uint32_t timeout_ms)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_TX, ESP_ERR_INVALID_ARG, TAG, "this channel is not tx channel");
esp_err_t ret = ESP_OK;
char *data_ptr;
char *src_byte;
size_t bytes_can_write;
*bytes_written = 0;
/* The binary semaphore can only be taken when the channel has been enabled and no other writing operation in progress */
ESP_RETURN_ON_FALSE(xSemaphoreTake(handle->binary, pdMS_TO_TICKS(timeout_ms)) == pdTRUE, ESP_ERR_INVALID_STATE, TAG, "The channel is not enabled");
src_byte = (char *)src;
while (size > 0 && handle->state == I2S_CHAN_STATE_RUNNING) {
if (handle->dma.rw_pos == handle->dma.buf_size || handle->dma.curr_ptr == NULL) {
if (xQueueReceive(handle->msg_queue, &(handle->dma.curr_ptr), pdMS_TO_TICKS(timeout_ms)) == pdFALSE) {
ret = ESP_ERR_TIMEOUT;
break;
}
handle->dma.rw_pos = 0;
}
data_ptr = (char *)handle->dma.curr_ptr;
data_ptr += handle->dma.rw_pos;
bytes_can_write = handle->dma.buf_size - handle->dma.rw_pos;
if (bytes_can_write > size) {
bytes_can_write = size;
}
memcpy(data_ptr, src_byte, bytes_can_write);
size -= bytes_can_write;
src_byte += bytes_can_write;
handle->dma.rw_pos += bytes_can_write;
(*bytes_written) += bytes_can_write;
}
xSemaphoreGive(handle->binary);
return ret;
}
esp_err_t i2s_channel_read(i2s_chan_handle_t handle, void *dest, size_t size, size_t *bytes_read, uint32_t timeout_ms)
{
I2S_NULL_POINTER_CHECK(TAG, handle);
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_RX, ESP_ERR_INVALID_ARG, TAG, "this channel is not rx channel");
esp_err_t ret = ESP_OK;
uint8_t *data_ptr;
uint8_t *dest_byte;
int bytes_can_read;
*bytes_read = 0;
dest_byte = (uint8_t *)dest;
/* The binary semaphore can only be taken when the channel has been enabled and no other reading operation in progress */
ESP_RETURN_ON_FALSE(xSemaphoreTake(handle->binary, pdMS_TO_TICKS(timeout_ms)) == pdTRUE, ESP_ERR_INVALID_STATE, TAG, "The channel is not enabled");
while (size > 0 && handle->state == I2S_CHAN_STATE_RUNNING) {
if (handle->dma.rw_pos == handle->dma.buf_size || handle->dma.curr_ptr == NULL) {
if (xQueueReceive(handle->msg_queue, &(handle->dma.curr_ptr), pdMS_TO_TICKS(timeout_ms)) == pdFALSE) {
ret = ESP_ERR_TIMEOUT;
break;
}
handle->dma.rw_pos = 0;
}
data_ptr = (uint8_t *)handle->dma.curr_ptr;
data_ptr += handle->dma.rw_pos;
bytes_can_read = handle->dma.buf_size - handle->dma.rw_pos;
if (bytes_can_read > (int)size) {
bytes_can_read = size;
}
memcpy(dest_byte, data_ptr, bytes_can_read);
size -= bytes_can_read;
dest_byte += bytes_can_read;
handle->dma.rw_pos += bytes_can_read;
(*bytes_read) += bytes_can_read;
}
xSemaphoreGive(handle->binary);
return ret;
}
/*---------------------------------------------------------------------------
I2S Platform APIs
----------------------------------------------------------------------------
Scope: This file and ADC/DAC/LCD driver
----------------------------------------------------------------------------*/
esp_err_t i2s_platform_acquire_occupation(int id, const char *comp_name)
{
esp_err_t ret = ESP_OK;
const char *occupied_comp = NULL;
ESP_RETURN_ON_FALSE(id < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "invalid i2s port id");
portENTER_CRITICAL(&g_i2s.spinlock);
if ((!g_i2s.controller[id]) && (g_i2s.comp_name[id] == NULL)) {
g_i2s.comp_name[id] = comp_name;
/* Enable module clock */
periph_module_enable(i2s_periph_signal[id].module);
i2s_ll_enable_clock(I2S_LL_GET_HW(id));
} else {
occupied_comp = g_i2s.comp_name[id];
ret = ESP_ERR_NOT_FOUND;
}
portEXIT_CRITICAL(&g_i2s.spinlock);
if (occupied_comp != NULL) {
ESP_LOGE(TAG, "i2s controller %d has been occupied by %s", id, occupied_comp);
}
return ret;
}
esp_err_t i2s_platform_release_occupation(int id)
{
esp_err_t ret = ESP_OK;
ESP_RETURN_ON_FALSE(id < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "invalid i2s port id");
portENTER_CRITICAL(&g_i2s.spinlock);
if (!g_i2s.controller[id]) {
g_i2s.comp_name[id] = NULL;
/* Disable module clock */
periph_module_disable(i2s_periph_signal[id].module);
i2s_ll_disable_clock(I2S_LL_GET_HW(id));
} else {
ret = ESP_ERR_INVALID_STATE;
}
portEXIT_CRITICAL(&g_i2s.spinlock);
return ret;
}
// Only used in `test_i2s_iram.c` to write DMA buffer directly
size_t inline i2s_platform_get_dma_buffer_offset(void)
{
/* Force to transfer address '0' into 'i2s_chan_handle_t' type,
* then find the corresponding field , the address of this field is the offset of this type */
return (size_t)&(((i2s_chan_handle_t)0)->dma.bufs);
}