mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
518 lines
24 KiB
C
518 lines
24 KiB
C
/* Copyright 2018 Espressif Systems (Shanghai) PTE LTD
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
// mbc_serial_slave.c
|
|
// Implementation of the Modbus controller serial slave
|
|
|
|
#include <sys/time.h> // for calculation of time stamp in milliseconds
|
|
#include "esp_log.h" // for log_write
|
|
#include "mb.h" // for mb types definition
|
|
#include "mbutils.h" // for mbutils functions definition for stack callback
|
|
#include "sdkconfig.h" // for KConfig values
|
|
#include "esp_modbus_common.h" // for common defines
|
|
#include "esp_modbus_slave.h" // for public slave interface types
|
|
#include "mbc_slave.h" // for private slave interface types
|
|
#include "mbc_serial_slave.h" // for serial slave implementation definitions
|
|
#include "port_serial_slave.h"
|
|
|
|
// Shared pointer to interface structure
|
|
static mb_slave_interface_t* mbs_interface_ptr = NULL; // &default_interface_inst;
|
|
|
|
// Modbus task function
|
|
static void modbus_slave_task(void *pvParameters)
|
|
{
|
|
// Modbus interface must be initialized before start
|
|
MB_SLAVE_ASSERT(mbs_interface_ptr != NULL);
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
|
|
MB_SLAVE_ASSERT(mbs_opts != NULL);
|
|
// Main Modbus stack processing cycle
|
|
for (;;) {
|
|
BaseType_t status = xEventGroupWaitBits(mbs_opts->mbs_event_group,
|
|
(BaseType_t)(MB_EVENT_STACK_STARTED),
|
|
pdFALSE, // do not clear bits
|
|
pdFALSE,
|
|
portMAX_DELAY);
|
|
// Check if stack started then poll for data
|
|
if (status & MB_EVENT_STACK_STARTED) {
|
|
(void)eMBPoll(); // allow stack to process data
|
|
(void)xMBPortSerialTxPoll(); // Send response buffer if ready
|
|
}
|
|
}
|
|
}
|
|
|
|
// Setup Modbus controller parameters
|
|
static esp_err_t mbc_serial_slave_setup(void* comm_info)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
MB_SLAVE_CHECK((comm_info != NULL), ESP_ERR_INVALID_ARG,
|
|
"mb wrong communication settings.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
mb_slave_comm_info_t* comm_settings = (mb_slave_comm_info_t*)comm_info;
|
|
MB_SLAVE_CHECK(((comm_settings->mode == MB_MODE_RTU) || (comm_settings->mode == MB_MODE_ASCII)),
|
|
ESP_ERR_INVALID_ARG, "mb incorrect mode = (0x%x).",
|
|
(uint32_t)comm_settings->mode);
|
|
MB_SLAVE_CHECK((comm_settings->slave_addr <= MB_ADDRESS_MAX),
|
|
ESP_ERR_INVALID_ARG, "mb wrong slave address = (0x%x).",
|
|
(uint32_t)comm_settings->slave_addr);
|
|
MB_SLAVE_CHECK((comm_settings->port < UART_NUM_MAX), ESP_ERR_INVALID_ARG,
|
|
"mb wrong port to set = (0x%x).", (uint32_t)comm_settings->port);
|
|
MB_SLAVE_CHECK((comm_settings->parity <= UART_PARITY_EVEN), ESP_ERR_INVALID_ARG,
|
|
"mb wrong parity option = (0x%x).", (uint32_t)comm_settings->parity);
|
|
|
|
// Set communication options of the controller
|
|
mbs_opts->mbs_comm = *(mb_communication_info_t*)comm_settings;
|
|
return ESP_OK;
|
|
}
|
|
|
|
// Start Modbus controller start function
|
|
static esp_err_t mbc_serial_slave_start(void)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
eMBErrorCode status = MB_EIO;
|
|
// Initialize Modbus stack using mbcontroller parameters
|
|
status = eMBInit((eMBMode)mbs_opts->mbs_comm.mode,
|
|
(UCHAR)mbs_opts->mbs_comm.slave_addr,
|
|
(UCHAR)mbs_opts->mbs_comm.port,
|
|
(ULONG)mbs_opts->mbs_comm.baudrate,
|
|
(eMBParity)mbs_opts->mbs_comm.parity);
|
|
MB_SLAVE_CHECK((status == MB_ENOERR), ESP_ERR_INVALID_STATE,
|
|
"mb stack initialization failure, eMBInit() returns (0x%x).", status);
|
|
status = eMBEnable();
|
|
MB_SLAVE_CHECK((status == MB_ENOERR), ESP_ERR_INVALID_STATE,
|
|
"mb stack set slave ID failure, eMBEnable() returned (0x%x).", (uint32_t)status);
|
|
// Set the mbcontroller start flag
|
|
EventBits_t flag = xEventGroupSetBits(mbs_opts->mbs_event_group,
|
|
(EventBits_t)MB_EVENT_STACK_STARTED);
|
|
MB_SLAVE_CHECK((flag & MB_EVENT_STACK_STARTED),
|
|
ESP_ERR_INVALID_STATE, "mb stack start event set error.");
|
|
return ESP_OK;
|
|
}
|
|
|
|
// Modbus controller destroy function
|
|
static esp_err_t mbc_serial_slave_destroy(void)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
eMBErrorCode mb_error = MB_ENOERR;
|
|
// Stop polling by clearing correspondent bit in the event group
|
|
EventBits_t flag = xEventGroupClearBits(mbs_opts->mbs_event_group,
|
|
(EventBits_t)MB_EVENT_STACK_STARTED);
|
|
MB_SLAVE_CHECK((flag & MB_EVENT_STACK_STARTED),
|
|
ESP_ERR_INVALID_STATE, "mb stack stop event failure.");
|
|
// Disable and then destroy the Modbus stack
|
|
mb_error = eMBDisable();
|
|
MB_SLAVE_CHECK((mb_error == MB_ENOERR), ESP_ERR_INVALID_STATE, "mb stack disable failure.");
|
|
(void)vTaskDelete(mbs_opts->mbs_task_handle);
|
|
(void)vQueueDelete(mbs_opts->mbs_notification_queue_handle);
|
|
(void)vEventGroupDelete(mbs_opts->mbs_event_group);
|
|
mb_error = eMBClose();
|
|
MB_SLAVE_CHECK((mb_error == MB_ENOERR), ESP_ERR_INVALID_STATE,
|
|
"mb stack close failure returned (0x%x).", (uint32_t)mb_error);
|
|
free(mbs_interface_ptr);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t mbc_serial_slave_set_descriptor(const mb_register_area_descriptor_t descr_info)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
MB_SLAVE_CHECK(((descr_info.type < MB_PARAM_COUNT) && (descr_info.type >= MB_PARAM_HOLDING)),
|
|
ESP_ERR_INVALID_ARG, "mb incorrect modbus instance type = (0x%x).",
|
|
(uint32_t)descr_info.type);
|
|
MB_SLAVE_CHECK((descr_info.address != NULL),
|
|
ESP_ERR_INVALID_ARG, "mb instance pointer is NULL.");
|
|
MB_SLAVE_CHECK((descr_info.size >= MB_INST_MIN_SIZE) && (descr_info.size < (MB_INST_MAX_SIZE)),
|
|
ESP_ERR_INVALID_ARG, "mb instance size is incorrect = (0x%x).",
|
|
(uint32_t)descr_info.size);
|
|
mbs_opts->mbs_area_descriptors[descr_info.type] = descr_info;
|
|
return ESP_OK;
|
|
}
|
|
|
|
// The helper function to get time stamp in microseconds
|
|
static uint64_t get_time_stamp()
|
|
{
|
|
uint64_t time_stamp = esp_timer_get_time();
|
|
return time_stamp;
|
|
}
|
|
|
|
// Helper function to send parameter information to application task
|
|
static esp_err_t send_param_info(mb_event_group_t par_type, uint16_t mb_offset,
|
|
uint8_t* par_address, uint16_t par_size)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
esp_err_t error = ESP_FAIL;
|
|
mb_param_info_t par_info;
|
|
// Check if queue is not full the send parameter information
|
|
par_info.type = par_type;
|
|
par_info.size = par_size;
|
|
par_info.address = par_address;
|
|
par_info.time_stamp = get_time_stamp();
|
|
par_info.mb_offset = mb_offset;
|
|
BaseType_t status = xQueueSend(mbs_opts->mbs_notification_queue_handle,
|
|
&par_info, MB_PAR_INFO_TOUT);
|
|
if (pdTRUE == status) {
|
|
ESP_LOGD(MB_SLAVE_TAG, "Queue send parameter info (type, address, size): %d, 0x%.4x, %d",
|
|
par_type, (uint32_t)par_address, par_size);
|
|
error = ESP_OK;
|
|
} else if (errQUEUE_FULL == status) {
|
|
ESP_LOGD(MB_SLAVE_TAG, "Parameter queue is overflowed.");
|
|
}
|
|
return error;
|
|
}
|
|
|
|
// Helper function to send notification
|
|
static esp_err_t send_param_access_notification(mb_event_group_t event)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
esp_err_t err = ESP_FAIL;
|
|
mb_event_group_t bits = (mb_event_group_t)xEventGroupSetBits(mbs_opts->mbs_event_group,
|
|
(EventBits_t)event);
|
|
if (bits & event) {
|
|
ESP_LOGD(MB_SLAVE_TAG, "The MB_REG_CHANGE_EVENT = 0x%.2x is set.", (uint8_t)event);
|
|
err = ESP_OK;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
// Blocking function to get event on parameter group change for application task
|
|
static mb_event_group_t mbc_serial_slave_check_event(mb_event_group_t group)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
MB_SLAVE_ASSERT(mbs_opts->mbs_event_group != NULL);
|
|
BaseType_t status = xEventGroupWaitBits(mbs_opts->mbs_event_group, (BaseType_t)group,
|
|
pdTRUE , pdFALSE, portMAX_DELAY);
|
|
return (mb_event_group_t)status;
|
|
}
|
|
|
|
// Function to get notification about parameter change from application task
|
|
static esp_err_t mbc_serial_slave_get_param_info(mb_param_info_t* reg_info, uint32_t timeout)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
ESP_ERR_INVALID_STATE,
|
|
"Slave interface is not correctly initialized.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
esp_err_t err = ESP_ERR_TIMEOUT;
|
|
MB_SLAVE_CHECK((mbs_opts->mbs_notification_queue_handle != NULL),
|
|
ESP_ERR_INVALID_ARG, "mb queue handle is invalid.");
|
|
MB_SLAVE_CHECK((reg_info != NULL), ESP_ERR_INVALID_ARG, "mb register information is invalid.");
|
|
BaseType_t status = xQueueReceive(mbs_opts->mbs_notification_queue_handle,
|
|
reg_info, pdMS_TO_TICKS(timeout));
|
|
if (status == pdTRUE) {
|
|
err = ESP_OK;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/* ----------------------- Callback functions for Modbus stack ---------------------------------*/
|
|
// These are executed by modbus stack to read appropriate type of registers.
|
|
|
|
// This is required to suppress warning when register start address is zero
|
|
#pragma GCC diagnostic ignored "-Wtype-limits"
|
|
|
|
// Callback function for reading of MB Input Registers
|
|
eMBErrorCode eMBRegInputCBSerialSlave(UCHAR * pucRegBuffer, USHORT usAddress,
|
|
USHORT usNRegs)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
MB_EILLSTATE, "Slave stack uninitialized.");
|
|
MB_SLAVE_CHECK((pucRegBuffer != NULL),
|
|
MB_EINVAL, "Slave stack call failed.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
USHORT usRegInputNregs = (USHORT)(mbs_opts->mbs_area_descriptors[MB_PARAM_INPUT].size >> 1); // Number of input registers
|
|
USHORT usInputRegStart = (USHORT)mbs_opts->mbs_area_descriptors[MB_PARAM_INPUT].start_offset; // Get Modbus start address
|
|
UCHAR* pucInputBuffer = (UCHAR*)mbs_opts->mbs_area_descriptors[MB_PARAM_INPUT].address; // Get instance address
|
|
USHORT usRegs = usNRegs;
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
USHORT iRegIndex;
|
|
// If input or configuration parameters are incorrect then return an error to stack layer
|
|
if ((usAddress >= usInputRegStart)
|
|
&& (pucInputBuffer != NULL)
|
|
&& (usNRegs >= 1)
|
|
&& ((usAddress + usRegs) <= (usInputRegStart + usRegInputNregs + 1))
|
|
&& (usRegInputNregs >= 1)) {
|
|
iRegIndex = (USHORT)(usAddress - usInputRegStart - 1);
|
|
iRegIndex <<= 1; // register Address to byte address
|
|
pucInputBuffer += iRegIndex;
|
|
UCHAR* pucBufferStart = pucInputBuffer;
|
|
while (usRegs > 0) {
|
|
_XFER_2_RD(pucRegBuffer, pucInputBuffer);
|
|
iRegIndex += 2;
|
|
usRegs -= 1;
|
|
}
|
|
// Send access notification
|
|
(void)send_param_access_notification(MB_EVENT_INPUT_REG_RD);
|
|
// Send parameter info to application task
|
|
(void)send_param_info(MB_EVENT_INPUT_REG_RD, (uint16_t)usAddress,
|
|
(uint8_t*)pucBufferStart, (uint16_t)usNRegs);
|
|
} else {
|
|
eStatus = MB_ENOREG;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
// Callback function for reading of MB Holding Registers
|
|
// Executed by stack when request to read/write holding registers is received
|
|
eMBErrorCode eMBRegHoldingCBSerialSlave(UCHAR * pucRegBuffer, USHORT usAddress,
|
|
USHORT usNRegs, eMBRegisterMode eMode)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
MB_EILLSTATE, "Slave stack uninitialized.");
|
|
MB_SLAVE_CHECK((pucRegBuffer != NULL),
|
|
MB_EINVAL, "Slave stack call failed.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
USHORT usRegHoldingNregs = (USHORT)(mbs_opts->mbs_area_descriptors[MB_PARAM_HOLDING].size >> 1);
|
|
USHORT usRegHoldingStart = (USHORT)mbs_opts->mbs_area_descriptors[MB_PARAM_HOLDING].start_offset;
|
|
UCHAR* pucHoldingBuffer = (UCHAR*)mbs_opts->mbs_area_descriptors[MB_PARAM_HOLDING].address;
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
USHORT iRegIndex;
|
|
USHORT usRegs = usNRegs;
|
|
// Check input and configuration parameters for correctness
|
|
if ((usAddress >= usRegHoldingStart)
|
|
&& (pucHoldingBuffer != NULL)
|
|
&& ((usAddress + usRegs) <= (usRegHoldingStart + usRegHoldingNregs + 1))
|
|
&& (usRegHoldingNregs >= 1)
|
|
&& (usNRegs >= 1)) {
|
|
iRegIndex = (USHORT) (usAddress - usRegHoldingStart - 1);
|
|
iRegIndex <<= 1; // register Address to byte address
|
|
pucHoldingBuffer += iRegIndex;
|
|
UCHAR* pucBufferStart = pucHoldingBuffer;
|
|
switch (eMode) {
|
|
case MB_REG_READ:
|
|
while (usRegs > 0) {
|
|
_XFER_2_RD(pucRegBuffer, pucHoldingBuffer);
|
|
iRegIndex += 2;
|
|
usRegs -= 1;
|
|
};
|
|
// Send access notification
|
|
(void)send_param_access_notification(MB_EVENT_HOLDING_REG_RD);
|
|
// Send parameter info
|
|
(void)send_param_info(MB_EVENT_HOLDING_REG_RD, (uint16_t)usAddress,
|
|
(uint8_t*)pucBufferStart, (uint16_t)usNRegs);
|
|
break;
|
|
case MB_REG_WRITE:
|
|
while (usRegs > 0) {
|
|
_XFER_2_WR(pucHoldingBuffer, pucRegBuffer);
|
|
pucHoldingBuffer += 2;
|
|
iRegIndex += 2;
|
|
usRegs -= 1;
|
|
};
|
|
// Send access notification
|
|
(void)send_param_access_notification(MB_EVENT_HOLDING_REG_WR);
|
|
// Send parameter info
|
|
(void)send_param_info(MB_EVENT_HOLDING_REG_WR, (uint16_t)usAddress,
|
|
(uint8_t*)pucBufferStart, (uint16_t)usNRegs);
|
|
break;
|
|
}
|
|
} else {
|
|
eStatus = MB_ENOREG;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
// Callback function for reading of MB Coils Registers
|
|
eMBErrorCode eMBRegCoilsCBSerialSlave(UCHAR* pucRegBuffer, USHORT usAddress,
|
|
USHORT usNCoils, eMBRegisterMode eMode)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
MB_EILLSTATE, "Slave stack uninitialized.");
|
|
MB_SLAVE_CHECK((pucRegBuffer != NULL),
|
|
MB_EINVAL, "Slave stack call failed.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
USHORT usRegCoilNregs = (USHORT)(mbs_opts->mbs_area_descriptors[MB_PARAM_COIL].size >> 1); // number of registers in storage area
|
|
USHORT usRegCoilsStart = (USHORT)mbs_opts->mbs_area_descriptors[MB_PARAM_COIL].start_offset; // MB offset of coils registers
|
|
UCHAR* pucRegCoilsBuf = (UCHAR*)mbs_opts->mbs_area_descriptors[MB_PARAM_COIL].address;
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
USHORT iRegIndex;
|
|
USHORT usCoils = usNCoils;
|
|
usAddress--; // The address is already +1
|
|
if ((usAddress >= usRegCoilsStart)
|
|
&& (usRegCoilNregs >= 1)
|
|
&& ((usAddress + usCoils) <= (usRegCoilsStart + (usRegCoilNregs << 4) + 1))
|
|
&& (pucRegCoilsBuf != NULL)
|
|
&& (usNCoils >= 1)) {
|
|
iRegIndex = (USHORT) (usAddress - usRegCoilsStart);
|
|
CHAR* pucCoilsDataBuf = (CHAR*)(pucRegCoilsBuf + (iRegIndex >> 3));
|
|
switch (eMode) {
|
|
case MB_REG_READ:
|
|
while (usCoils > 0) {
|
|
UCHAR ucResult = xMBUtilGetBits((UCHAR*)pucRegCoilsBuf, iRegIndex, 1);
|
|
xMBUtilSetBits(pucRegBuffer, iRegIndex - (usAddress - usRegCoilsStart), 1, ucResult);
|
|
iRegIndex++;
|
|
usCoils--;
|
|
}
|
|
// Send an event to notify application task about event
|
|
(void)send_param_access_notification(MB_EVENT_COILS_RD);
|
|
(void)send_param_info(MB_EVENT_COILS_RD, (uint16_t)usAddress,
|
|
(uint8_t*)(pucCoilsDataBuf), (uint16_t)usNCoils);
|
|
break;
|
|
case MB_REG_WRITE:
|
|
while (usCoils > 0) {
|
|
UCHAR ucResult = xMBUtilGetBits(pucRegBuffer,
|
|
iRegIndex - (usAddress - usRegCoilsStart), 1);
|
|
xMBUtilSetBits((uint8_t*)pucRegCoilsBuf, iRegIndex, 1, ucResult);
|
|
iRegIndex++;
|
|
usCoils--;
|
|
}
|
|
// Send an event to notify application task about event
|
|
(void)send_param_access_notification(MB_EVENT_COILS_WR);
|
|
(void)send_param_info(MB_EVENT_COILS_WR, (uint16_t)usAddress,
|
|
(uint8_t*)pucCoilsDataBuf, (uint16_t)usNCoils);
|
|
break;
|
|
} // switch ( eMode )
|
|
} else {
|
|
// If the configuration or input parameters are incorrect then return error to stack
|
|
eStatus = MB_ENOREG;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
// Callback function for reading of MB Discrete Input Registers
|
|
eMBErrorCode eMBRegDiscreteCBSerialSlave(UCHAR* pucRegBuffer, USHORT usAddress,
|
|
USHORT usNDiscrete)
|
|
{
|
|
MB_SLAVE_CHECK((mbs_interface_ptr != NULL),
|
|
MB_EILLSTATE, "Slave stack uninitialized.");
|
|
MB_SLAVE_CHECK((pucRegBuffer != NULL),
|
|
MB_EINVAL, "Slave stack call failed.");
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
USHORT usRegDiscreteNregs = (USHORT)(mbs_opts->mbs_area_descriptors[MB_PARAM_DISCRETE].size >> 1); // number of registers in storage area
|
|
USHORT usRegDiscreteStart = (USHORT)mbs_opts->mbs_area_descriptors[MB_PARAM_DISCRETE].start_offset; // MB offset of registers
|
|
UCHAR* pucRegDiscreteBuf = (UCHAR*)mbs_opts->mbs_area_descriptors[MB_PARAM_DISCRETE].address; // the storage address
|
|
eMBErrorCode eStatus = MB_ENOERR;
|
|
USHORT iRegIndex, iRegBitIndex, iNReg;
|
|
UCHAR* pucDiscreteInputBuf;
|
|
iNReg = usNDiscrete / 8 + 1;
|
|
pucDiscreteInputBuf = (UCHAR*) pucRegDiscreteBuf;
|
|
// It already plus one in modbus function method.
|
|
usAddress--;
|
|
if ((usAddress >= usRegDiscreteStart)
|
|
&& (usRegDiscreteNregs >= 1)
|
|
&& (pucRegDiscreteBuf != NULL)
|
|
&& ((usAddress + usNDiscrete) <= (usRegDiscreteStart + (usRegDiscreteNregs * 16)))
|
|
&& (usNDiscrete >= 1)) {
|
|
iRegIndex = (USHORT) (usAddress - usRegDiscreteStart) / 8; // Get register index in the buffer for bit number
|
|
iRegBitIndex = (USHORT)(usAddress - usRegDiscreteStart) % 8; // Get bit index
|
|
UCHAR* pucTempBuf = &pucDiscreteInputBuf[iRegIndex];
|
|
while (iNReg > 0) {
|
|
*pucRegBuffer++ = xMBUtilGetBits(&pucDiscreteInputBuf[iRegIndex++], iRegBitIndex, 8);
|
|
iNReg--;
|
|
}
|
|
pucRegBuffer--;
|
|
// Last discrete
|
|
usNDiscrete = usNDiscrete % 8;
|
|
// Filling zero to high bit
|
|
*pucRegBuffer = *pucRegBuffer << (8 - usNDiscrete);
|
|
*pucRegBuffer = *pucRegBuffer >> (8 - usNDiscrete);
|
|
// Send an event to notify application task about event
|
|
(void)send_param_access_notification(MB_EVENT_DISCRETE_RD);
|
|
(void)send_param_info(MB_EVENT_DISCRETE_RD, (uint16_t)usAddress,
|
|
(uint8_t*)pucTempBuf, (uint16_t)usNDiscrete);
|
|
} else {
|
|
eStatus = MB_ENOREG;
|
|
}
|
|
return eStatus;
|
|
}
|
|
#pragma GCC diagnostic pop // require GCC
|
|
|
|
// Initialization of Modbus controller
|
|
esp_err_t mbc_serial_slave_create(mb_port_type_t port_type, void** handler)
|
|
{
|
|
MB_SLAVE_CHECK((port_type == MB_PORT_SERIAL_SLAVE),
|
|
ESP_ERR_NOT_SUPPORTED,
|
|
"mb port not supported = %u.", (uint32_t)port_type);
|
|
// Allocate space for options
|
|
if (mbs_interface_ptr == NULL) {
|
|
mbs_interface_ptr = malloc(sizeof(mb_slave_interface_t));
|
|
}
|
|
MB_SLAVE_ASSERT(mbs_interface_ptr != NULL);
|
|
vMBPortSetMode((UCHAR)port_type);
|
|
mb_slave_options_t* mbs_opts = &mbs_interface_ptr->opts;
|
|
mbs_opts->port_type = MB_PORT_SERIAL_SLAVE; // set interface port type
|
|
|
|
// Set default values of communication options
|
|
mbs_opts->mbs_comm.mode = MB_MODE_RTU;
|
|
mbs_opts->mbs_comm.slave_addr = MB_DEVICE_ADDRESS;
|
|
mbs_opts->mbs_comm.port = MB_UART_PORT;
|
|
mbs_opts->mbs_comm.baudrate = MB_DEVICE_SPEED;
|
|
mbs_opts->mbs_comm.parity = MB_PARITY_NONE;
|
|
|
|
// Initialization of active context of the Modbus controller
|
|
BaseType_t status = 0;
|
|
// Parameter change notification queue
|
|
mbs_opts->mbs_event_group = xEventGroupCreate();
|
|
MB_SLAVE_CHECK((mbs_opts->mbs_event_group != NULL),
|
|
ESP_ERR_NO_MEM, "mb event group error.");
|
|
// Parameter change notification queue
|
|
mbs_opts->mbs_notification_queue_handle = xQueueCreate(
|
|
MB_CONTROLLER_NOTIFY_QUEUE_SIZE,
|
|
sizeof(mb_param_info_t));
|
|
MB_SLAVE_CHECK((mbs_opts->mbs_notification_queue_handle != NULL),
|
|
ESP_ERR_NO_MEM, "mb notify queue creation error.");
|
|
// Create Modbus controller task
|
|
status = xTaskCreate((void*)&modbus_slave_task,
|
|
"modbus_slave_task",
|
|
MB_CONTROLLER_STACK_SIZE,
|
|
NULL,
|
|
MB_CONTROLLER_PRIORITY,
|
|
&mbs_opts->mbs_task_handle);
|
|
if (status != pdPASS) {
|
|
vTaskDelete(mbs_opts->mbs_task_handle);
|
|
MB_SLAVE_CHECK((status == pdPASS), ESP_ERR_NO_MEM,
|
|
"mb controller task creation error, xTaskCreate() returns (0x%x).",
|
|
(uint32_t)status);
|
|
}
|
|
MB_SLAVE_ASSERT(mbs_opts->mbs_task_handle != NULL); // The task is created but handle is incorrect
|
|
|
|
// Initialize interface function pointers
|
|
mbs_interface_ptr->check_event = mbc_serial_slave_check_event;
|
|
mbs_interface_ptr->destroy = mbc_serial_slave_destroy;
|
|
mbs_interface_ptr->get_param_info = mbc_serial_slave_get_param_info;
|
|
mbs_interface_ptr->init = mbc_serial_slave_create;
|
|
mbs_interface_ptr->set_descriptor = mbc_serial_slave_set_descriptor;
|
|
mbs_interface_ptr->setup = mbc_serial_slave_setup;
|
|
mbs_interface_ptr->start = mbc_serial_slave_start;
|
|
|
|
// Initialize stack callback function pointers
|
|
mbs_interface_ptr->slave_reg_cb_discrete = eMBRegDiscreteCBSerialSlave;
|
|
mbs_interface_ptr->slave_reg_cb_input = eMBRegInputCBSerialSlave;
|
|
mbs_interface_ptr->slave_reg_cb_holding = eMBRegHoldingCBSerialSlave;
|
|
mbs_interface_ptr->slave_reg_cb_coils = eMBRegCoilsCBSerialSlave;
|
|
|
|
*handler = (void*)mbs_interface_ptr;
|
|
|
|
return ESP_OK;
|
|
}
|
|
|