esp-idf/components/esp32/ld
Liu Zhi Fu 2242bf9b37 lwip/esp32/examples: wifi throughput optimizations
1. Put some lwip udp rx/tx relating functions to IRAM
2. Put some wifi rx/tx relating functions to IRAMa
3. Reduce wifi dynamic malloc from 4 to 1 for each ebuf
4. Update iperf example accordingly
5. Update libphy.a to v383
2018-01-30 16:27:49 +08:00
..
elf_to_ld.sh Initial public version 2016-08-17 23:08:22 +08:00
esp32.common.ld lwip/esp32/examples: wifi throughput optimizations 2018-01-30 16:27:49 +08:00
esp32.ld esp32: Change 192KB runtime static limit workaround to a 176KB link time workaround 2017-12-27 11:59:54 +11:00
esp32.peripherals.ld feature(I2S-ADC): add ADC mode for I2S. 2017-09-14 13:24:08 +08:00
esp32.rom.ld component/bt: increase programming delay for event arbiter to allow for heavy workload 2017-09-30 18:12:45 +08:00
esp32.rom.nanofmt.ld newlib: add "full" formatting support, add missing functions 2016-12-08 11:04:54 +08:00
esp32.rom.spiflash.ld spiflash ROM functions: Remove Quad I/O mode enable/disable code from flash ROM functions 2017-04-13 17:54:42 +10:00
esp32.rom.spiram_incompatible_fns.ld Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
esp32.spiram.rom-functions-dram.ld Make sure functions that are in ROM in the non-external-ram-workaround version, are in RAM (and not in flash) in the ext-ram workaround version. 2017-09-13 10:36:56 +08:00
esp32.spiram.rom-functions-iram.ld Make sure functions that are in ROM in the non-external-ram-workaround version, are in RAM (and not in flash) in the ext-ram workaround version. 2017-09-13 10:36:56 +08:00