esp-idf/components/esp32/rtc.h
XiaXiaotian f36c909528 update phy and rtc lib
1. RTC V214: modify APLL function for the chip of ECO version.

2. Add API phy_close_rf() and use it in esp_phy_deinit() instead of pm_close_rf().

3. RTC V213: fix BT will not work when BT-init is called more than once.
2017-02-27 19:54:22 +08:00

147 lines
4.7 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/**
* @file rtc.h
* @brief Declarations of APIs provided by librtc.a
*
* This file is not in the include directory of esp32 component, so it is not
* part of the public API. As the source code of librtc.a is gradually moved
* into the ESP-IDF, some of these APIs will be exposed to applications.
*
* For now, only esp_deep_sleep function declared in esp_deepsleep.h
* is part of public API.
*/
#pragma once
#include <stdint.h>
#include <stddef.h>
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum{
XTAL_40M = 40,
XTAL_26M = 26,
XTAL_24M = 24,
XTAL_AUTO = 0
} xtal_freq_t;
typedef enum{
CPU_XTAL = 0,
CPU_80M = 1,
CPU_160M = 2,
CPU_240M = 3,
CPU_2M = 4
} cpu_freq_t;
typedef enum {
CALI_RTC_MUX = 0,
CALI_8MD256 = 1,
CALI_32K_XTAL = 2
} cali_clk_t;
/**
* This function must be called to initialize RTC library
* @param xtal_freq Frequency of main crystal
*/
void rtc_init_lite(xtal_freq_t xtal_freq);
/**
* Switch CPU frequency
* @param cpu_freq new CPU frequency
*/
void rtc_set_cpu_freq(cpu_freq_t cpu_freq);
/**
* @brief Return RTC slow clock's period
* @param cali_clk clock to calibrate
* @param slow_clk_cycles number of slow clock cycles to average
* @param xtal_freq chip's main XTAL freq
* @return average slow clock period in microseconds, Q13.19 fixed point format
*/
uint32_t rtc_slowck_cali(cali_clk_t cali_clk, uint32_t slow_clk_cycles);
/**
* @brief Convert from microseconds to slow clock cycles
* @param time_in_us_h Time in microseconds, higher 32 bit part
* @param time_in_us_l Time in microseconds, lower 32 bit part
* @param slow_clk_period Period of slow clock in microseconds, Q13.19 fixed point format (as returned by rtc_slowck_cali).
* @param[out] cylces_h output, higher 32 bit part of number of slow clock cycles
* @param[out] cycles_l output, lower 32 bit part of number of slow clock cycles
*/
void rtc_usec2rtc(uint32_t time_in_us_h, uint32_t time_in_us_l, uint32_t slow_clk_period, uint32_t *cylces_h, uint32_t *cycles_l);
#define DEEP_SLEEP_PD_NORMAL BIT(0) /*!< Base deep sleep mode */
#define DEEP_SLEEP_PD_RTC_PERIPH BIT(1) /*!< Power down RTC peripherals */
#define DEEP_SLEEP_PD_RTC_SLOW_MEM BIT(2) /*!< Power down RTC SLOW memory */
#define DEEP_SLEEP_PD_RTC_FAST_MEM BIT(3) /*!< Power down RTC FAST memory */
/**
* @brief Prepare for entering sleep mode
* @param deep_slp DEEP_SLEEP_PD_ flags combined with OR (DEEP_SLEEP_PD_NORMAL must be included)
* @param cpu_lp_mode for deep sleep, should be 0
*/
void rtc_slp_prep_lite(uint32_t deep_slp, uint32_t cpu_lp_mode);
#define RTC_EXT_EVENT0_TRIG BIT(0)
#define RTC_EXT_EVENT1_TRIG BIT(1)
#define RTC_GPIO_TRIG BIT(2)
#define RTC_TIMER_EXPIRE BIT(3)
#define RTC_SDIO_TRIG BIT(4)
#define RTC_MAC_TRIG BIT(5)
#define RTC_UART0_TRIG BIT(6)
#define RTC_UART1_TRIG BIT(7)
#define RTC_TOUCH_TRIG BIT(8)
#define RTC_SAR_TRIG BIT(9)
#define RTC_BT_TRIG BIT(10)
#define RTC_EXT_EVENT0_TRIG_EN RTC_EXT_EVENT0_TRIG
#define RTC_EXT_EVENT1_TRIG_EN RTC_EXT_EVENT1_TRIG
#define RTC_GPIO_TRIG_EN RTC_GPIO_TRIG
#define RTC_TIMER_EXPIRE_EN RTC_TIMER_EXPIRE
#define RTC_SDIO_TRIG_EN RTC_SDIO_TRIG
#define RTC_MAC_TRIG_EN RTC_MAC_TRIG
#define RTC_UART0_TRIG_EN RTC_UART0_TRIG
#define RTC_UART1_TRIG_EN RTC_UART1_TRIG
#define RTC_TOUCH_TRIG_EN RTC_TOUCH_TRIG
#define RTC_SAR_TRIG_EN RTC_SAR_TRIG
#define RTC_BT_TRIG_EN RTC_BT_TRIG
/**
* @brief Enter sleep mode for given number of cycles
* @param cycles_h higher 32 bit part of number of slow clock cycles
* @param cycles_l lower 32 bit part of number of slow clock cycles
* @param wakeup_opt wake up reason to enable (RTC_xxx_EN flags combined with OR)
* @param reject_opt reserved, should be 0
* @return TBD
*/
uint32_t rtc_sleep(uint32_t cycles_h, uint32_t cycles_l, uint32_t wakeup_opt, uint32_t reject_opt);
/**
* @brief Shutdown PHY and RF. TODO: convert this function to another one.
*/
void phy_close_rf(void);
#ifdef __cplusplus
}
#endif