esp-idf/components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h
Alexey Gerenkov 8d43859b6a esp32: SEGGER SystemView Tracing Support
Implements support for system level traces compatible with SEGGER
SystemView tool on top of ESP32 application tracing module.
That kind of traces can help to analyse program's behaviour.
SystemView can show timeline of tasks/ISRs execution, context switches,
statistics related to the CPUs' load distribution etc.

Also this commit adds useful feature to ESP32 application tracing module:
 - Trace data buffering is implemented to handle temporary peaks of events load
2017-06-27 20:52:43 +03:00

179 lines
7.8 KiB
C

/*********************************************************************
* SEGGER Microcontroller GmbH & Co. KG *
* The Embedded Experts *
**********************************************************************
* *
* (c) 2015 - 2017 SEGGER Microcontroller GmbH & Co. KG *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH & Co. KG *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: V2.42 *
* *
**********************************************************************
-------------------------- END-OF-HEADER -----------------------------
File : SEGGER_SYSVIEW_ConfDefaults.h
Purpose : Defines defaults for configurable defines used in
SEGGER SystemView.
Revision: $Rev: 3734 $
*/
#ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H
#define SEGGER_SYSVIEW_CONFDEFAULTS_H
/*********************************************************************
*
* #include Section
*
**********************************************************************
*/
#include "SEGGER_SYSVIEW_Conf.h"
#include "SEGGER_RTT_Conf.h"
#ifdef __cplusplus
extern "C" {
#endif
/*********************************************************************
*
* Configuration defaults
*
**********************************************************************
*/
// Number of bytes that SystemView uses for a buffer.
#ifndef SEGGER_SYSVIEW_RTT_BUFFER_SIZE
#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 1024
#endif
// The RTT channel that SystemView will use.
#ifndef SEGGER_SYSVIEW_RTT_CHANNEL
#define SEGGER_SYSVIEW_RTT_CHANNEL 0
#endif
// Sanity check of RTT channel
#if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2)
#error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > 1!"
#elif (SEGGER_SYSVIEW_RTT_CHANNEL >= SEGGER_RTT_MAX_NUM_UP_BUFFERS)
#error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!"
#endif
// Place the SystemView buffer into its own/the RTT section
#if !(defined SEGGER_SYSVIEW_BUFFER_SECTION) && (defined SEGGER_RTT_SECTION)
#define SEGGER_SYSVIEW_BUFFER_SECTION SEGGER_RTT_SECTION
#endif
// Retrieve a system timestamp. This gets the Cortex-M cycle counter.
#ifndef SEGGER_SYSVIEW_GET_TIMESTAMP
#error "SEGGER_SYSVIEW_GET_TIMESTAMP has to be defined in SEGGER_SYSVIEW_Conf.h!"
#endif
// Define number of valid bits low-order delivered by clock source.
#ifndef SEGGER_SYSVIEW_TIMESTAMP_BITS
#define SEGGER_SYSVIEW_TIMESTAMP_BITS 32
#endif
// Lowest Id reported by the Application.
#ifndef SEGGER_SYSVIEW_ID_BASE
#define SEGGER_SYSVIEW_ID_BASE 0
#endif
// Number of bits to shift Ids to save bandwidth
#ifndef SEGGER_SYSVIEW_ID_SHIFT
#define SEGGER_SYSVIEW_ID_SHIFT 0
#endif
#ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID
#error "SEGGER_SYSVIEW_GET_INTERRUPT_ID has to be defined in SEGGER_SYSVIEW_Conf.h!"
#endif
#ifndef SEGGER_SYSVIEW_MAX_ARGUMENTS
#define SEGGER_SYSVIEW_MAX_ARGUMENTS 16
#endif
#ifndef SEGGER_SYSVIEW_MAX_STRING_LEN
#define SEGGER_SYSVIEW_MAX_STRING_LEN 128
#endif
// Use a static buffer instead of a buffer on the stack for packets
#ifndef SEGGER_SYSVIEW_USE_STATIC_BUFFER
#define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1
#endif
// Maximum packet size used by SystemView for the static buffer
#ifndef SEGGER_SYSVIEW_MAX_PACKET_SIZE
#define SEGGER_SYSVIEW_MAX_PACKET_SIZE SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32
#endif
// Use post-mortem analysis instead of real-time analysis
#ifndef SEGGER_SYSVIEW_POST_MORTEM_MODE
#define SEGGER_SYSVIEW_POST_MORTEM_MODE 0
#endif
// Configure how frequently syncronization is sent
#ifndef SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
#define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT 8
#endif
// Lock SystemView (nestable)
#ifndef SEGGER_SYSVIEW_LOCK
#define SEGGER_SYSVIEW_LOCK() SEGGER_RTT_LOCK()
#endif
// Unlock SystemView (nestable)
#ifndef SEGGER_SYSVIEW_UNLOCK
#define SEGGER_SYSVIEW_UNLOCK() SEGGER_RTT_UNLOCK()
#endif
#ifdef __cplusplus
}
#endif
#endif
/*************************** End of file ****************************/