alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
8cae0ed755
esp-idf/examples/bluetooth/bluedroid/ble/ble_ancs
History
Jin Cheng a3f68aef8a feat(bt/bluedroid): Added API to get local device name
2023-12-15 19:30:12 +08:00
..
main feat(bt/bluedroid): Added API to get local device name 2023-12-15 19:30:12 +08:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md esp32h4: removed esp32h4 related codes 2023-04-23 12:03:07 +00:00
sdkconfig.defaults ci(ble/bluedroid): Add notes in sdkconfig.defaults 2023-11-21 15:00:55 +08:00
sdkconfig.defaults.esp32c2 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 2022-08-09 16:28:01 +00:00
sdkconfig.defaults.esp32c3 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 2022-08-09 16:28:01 +00:00
sdkconfig.defaults.esp32s3 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 2022-08-09 16:28:01 +00:00

README.md

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S3

ESP-IDF BLE ANCS Example

The purpose of the Apple Notification Center Service (ANCS) is to give Bluetooth accessories (that connect to iOS devices through a Bluetooth low-energy link) a simple and convenient way to access many kinds of notifications that are generated on iOS devices.

How to Use Example

Before project configuration and build, be sure to set the correct chip target using:

idf.py set-target <chip_name>

The Apple Notification Center Service is a primary service whose service UUID is:

7905F431-B5CE-4E99-A40F-4B1E122D00D0

Only one instance of the ANCS may be present on an NP. Due to the nature of iOS, the ANCS is not guaranteed to always be present. As a result, the NC should look for and subscribe to the Service Changed characteristic of the GATT service in order to monitor for the potential publishing and unpublishing of the ANCS at any time.

In its basic form, the ANCS exposes three characteristics: Notification Source: UUID 9FBF120D-6301-42D9-8C58-25E699A21DBD (notifiable) Control Point: UUID 69D1D8F3-45E1-49A8-9821-9BBDFDAAD9D9 (writeable with response) Data Source: UUID 22EAC6E9-24D6-4BB5-BE44-B36ACE7C7BFB (notifiable)

All these characteristics require authorization for access.

Hardware Required

  • A development board with ESP32/ESP32-C3/ESP32-H2/ESP32-C2/ESP32-S3 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
  • A USB cable for power supply and programming

See Development Boards for more information about it.

Build and Flash

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (0) cpu_start: Starting scheduler on APP CPU.
I (558) BTDM_INIT: BT controller compile version [1342a48]
I (568) system_api: Base MAC address is not set
I (568) system_api: read default base MAC address from EFUSE
I (568) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
I (918) BLE_ANCS: app_main init bluetooth
I (1018) BLE_ANCS: REG_EVT
E (1028) BT_BTM: BTM_BleConfigLocalIcon

I (1058) BLE_ANCS: advertising start success

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.