esp-idf/components/newlib/test/test_time.c
Ivan Grokhotkov 8c25a0fd9d time: workaround for FRC_TIMER_INT_REG write issue
In some cases (when RTC register reads are performed from the APP CPU), a write to FRC_TIMER_INT_REG may be lost on the bus.
Writing to another DPORT register immediately before or after that works around the issue.
We write one dummy value to an address which doesn’t have any register associated with it.

Fixes https://github.com/espressif/arduino-esp32/issues/120
2017-01-17 12:29:09 +08:00

51 lines
1.6 KiB
C

#include <stdio.h>
#include <math.h>
#include "unity.h"
#include "driver/adc.h"
#include <time.h>
#include <sys/time.h>
#include "soc/rtc_cntl_reg.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "sdkconfig.h"
// https://github.com/espressif/arduino-esp32/issues/120
TEST_CASE("Reading RTC registers on APP CPU doesn't affect clock", "[newlib]")
{
// This runs on APP CPU:
void time_adc_test_task(void* arg)
{
for (int i = 0; i < 200000; ++i) {
// wait for 20us, reading one of RTC registers
uint32_t ccount = xthal_get_ccount();
while (xthal_get_ccount() - ccount < 20 * CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ) {
volatile uint32_t val = REG_READ(RTC_CNTL_STATE0_REG);
(void) val;
}
}
SemaphoreHandle_t * p_done = (SemaphoreHandle_t *) arg;
xSemaphoreGive(*p_done);
vTaskDelay(1);
vTaskDelete(NULL);
}
SemaphoreHandle_t done = xSemaphoreCreateBinary();
xTaskCreatePinnedToCore(&time_adc_test_task, "time_adc", 4096, &done, 5, NULL, 1);
// This runs on PRO CPU:
for (int i = 0; i < 4; ++i) {
struct timeval tv_start;
gettimeofday(&tv_start, NULL);
vTaskDelay(1000/portTICK_PERIOD_MS);
struct timeval tv_stop;
gettimeofday(&tv_stop, NULL);
float time_sec = tv_stop.tv_sec - tv_start.tv_sec + 1e-6f * (tv_stop.tv_usec - tv_start.tv_usec);
printf("(0) time taken: %f sec\n", time_sec);
TEST_ASSERT_TRUE(fabs(time_sec - 1.0f) < 0.1);
}
TEST_ASSERT_TRUE(xSemaphoreTake(done, 5000 / portTICK_RATE_MS));
}