mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
411405355d
This commit refactors SOC_USB_PERIPH_NUM as follows: - Renamed to SOC_USB_OTG_PERIPH_NUM to avoid confusion with USB Serial JTAG - Updated to unsigned integer "1U" - Updated some build rules to depend on SOC_USB_OTG_SUPPORTED instead
296 lines
7.2 KiB
YAML
296 lines
7.2 KiB
YAML
# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
|
|
|
|
examples/peripherals/adc/continuous_read:
|
|
disable:
|
|
- if: SOC_ADC_DMA_SUPPORTED != 1
|
|
|
|
examples/peripherals/adc/oneshot_read:
|
|
disable:
|
|
- if: SOC_ADC_SUPPORTED != 1
|
|
|
|
examples/peripherals/analog_comparator:
|
|
disable:
|
|
- if: SOC_ANA_CMPR_SUPPORTED != 1
|
|
|
|
examples/peripherals/dac:
|
|
disable:
|
|
- if: SOC_DAC_SUPPORTED != 1
|
|
|
|
examples/peripherals/gpio/matrix_keyboard:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32s2"
|
|
|
|
examples/peripherals/i2c/i2c_self_test:
|
|
disable:
|
|
- if: SOC_I2C_SUPPORT_SLAVE != 1
|
|
reason: the test requires both master and slave
|
|
|
|
examples/peripherals/i2c/i2c_simple:
|
|
disable:
|
|
- if: SOC_I2C_SUPPORT_SLAVE != 1
|
|
reason: the test requires both master and slave
|
|
|
|
examples/peripherals/i2c/i2c_tools:
|
|
disable:
|
|
- if: SOC_I2C_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/i2s/i2s_adc_dac:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTS_ADC_DAC != 1
|
|
|
|
examples/peripherals/i2s/i2s_basic/i2s_pdm:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTS_PDM != 1
|
|
|
|
examples/peripherals/i2s/i2s_basic/i2s_std:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTED != 1
|
|
|
|
examples/peripherals/i2s/i2s_basic/i2s_tdm:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTS_TDM != 1
|
|
|
|
examples/peripherals/i2s/i2s_codec/i2s_es7210_tdm:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTS_TDM != 1 or (SOC_I2C_SUPPORTED != 1 or SOC_GPSPI_SUPPORTED != 1)
|
|
reason: rely on I2S TDM mode to receive audio, I2C to config es7210 and SPI to save audio to SD card
|
|
|
|
examples/peripherals/i2s/i2s_codec/i2s_es8311:
|
|
disable:
|
|
- if: SOC_I2S_SUPPORTED != 1 or SOC_I2C_SUPPORTED != 1
|
|
reason: rely on I2S STD mode and I2C to config es7210
|
|
|
|
examples/peripherals/i2s/i2s_recorder:
|
|
enable:
|
|
- if: SOC_I2S_SUPPORTS_PDM_RX > 0
|
|
|
|
examples/peripherals/lcd/i2c_oled:
|
|
disable:
|
|
- if: SOC_I2C_SUPPORTED != 1
|
|
|
|
examples/peripherals/lcd/i80_controller:
|
|
disable:
|
|
- if: SOC_LCD_I80_SUPPORTED != 1
|
|
|
|
examples/peripherals/lcd/rgb_panel:
|
|
disable:
|
|
- if: SOC_LCD_RGB_SUPPORTED != 1
|
|
|
|
examples/peripherals/lcd/spi_lcd_touch:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/lcd/tjpgd:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/ledc:
|
|
disable:
|
|
- if: SOC_LEDC_SUPPORTED != 1
|
|
|
|
examples/peripherals/ledc/ledc_gamma_curve_fade:
|
|
disable:
|
|
- if: SOC_LEDC_SUPPORTED != 1 or SOC_LEDC_GAMMA_CURVE_FADE_SUPPORTED != 1
|
|
|
|
examples/peripherals/mcpwm:
|
|
disable:
|
|
- if: SOC_MCPWM_SUPPORTED != 1
|
|
|
|
examples/peripherals/mcpwm/mcpwm_bdc_speed_control:
|
|
disable:
|
|
- if: SOC_MCPWM_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32s3"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/mcpwm/mcpwm_bldc_hall_control:
|
|
disable:
|
|
- if: SOC_MCPWM_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32s3"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/parlio:
|
|
disable:
|
|
- if: SOC_PARLIO_SUPPORTED != 1
|
|
|
|
examples/peripherals/parlio/simple_rgb_led_matrix:
|
|
disable:
|
|
- if: SOC_PARLIO_SUPPORTED != 1 or SOC_DEDICATED_GPIO_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32c6"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/pcnt:
|
|
disable:
|
|
- if: SOC_PCNT_SUPPORTED != 1
|
|
|
|
examples/peripherals/rmt:
|
|
disable:
|
|
- if: SOC_RMT_SUPPORTED != 1
|
|
|
|
examples/peripherals/rmt/ir_nec_transceiver:
|
|
disable:
|
|
- if: SOC_RMT_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/rmt/musical_buzzer:
|
|
disable:
|
|
- if: SOC_RMT_SUPPORT_TX_LOOP_COUNT != 1
|
|
|
|
examples/peripherals/rmt/onewire_ds18b20:
|
|
disable:
|
|
- if: SOC_RMT_SUPPORTED != 1
|
|
|
|
examples/peripherals/rmt/stepper_motor:
|
|
disable:
|
|
- if: SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP != 1
|
|
|
|
examples/peripherals/sdio/host:
|
|
enable:
|
|
- if: SOC_SDMMC_HOST_SUPPORTED == 1
|
|
- if: IDF_TARGET == "esp32"
|
|
temporary: true
|
|
reason: Only the SDSPI of ESP32 supports ESP SDIO slave for now
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/sdio/slave:
|
|
disable:
|
|
- if: SOC_SDIO_SLAVE_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET != "esp32"
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/secure_element/atecc608_ecdsa:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32"
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|
|
|
|
examples/peripherals/sigma_delta:
|
|
disable:
|
|
- if: SOC_SDM_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_master/hd_eeprom:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_master/lcd:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_slave/receiver:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_slave/sender:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_slave_hd/append_mode/master:
|
|
disable:
|
|
- if: IDF_TARGET == "esp32c6"
|
|
temporary: true
|
|
reason: target(s) not supported yet
|
|
|
|
examples/peripherals/spi_slave_hd/append_mode/slave:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32s2"
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|
|
|
|
examples/peripherals/spi_slave_hd/segment_mode/seg_master:
|
|
disable:
|
|
- if: SOC_GPSPI_SUPPORTED != 1
|
|
|
|
examples/peripherals/spi_slave_hd/segment_mode/seg_slave:
|
|
disable:
|
|
- if: IDF_TARGET == "esp32"
|
|
temporary: true
|
|
reason: not supported
|
|
|
|
examples/peripherals/temperature_sensor/temp_sensor:
|
|
disable:
|
|
- if: SOC_TEMP_SENSOR_SUPPORTED != 1
|
|
|
|
examples/peripherals/temperature_sensor/temp_sensor_monitor:
|
|
disable:
|
|
- if: SOC_TEMPERATURE_SENSOR_INTR_SUPPORT != 1
|
|
|
|
examples/peripherals/timer_group:
|
|
disable:
|
|
- if: SOC_GPTIMER_SUPPORTED != 1
|
|
|
|
examples/peripherals/timer_group/gptimer_capture_hc_sr04:
|
|
disable:
|
|
- if: SOC_TIMER_SUPPORT_ETM != 1
|
|
|
|
examples/peripherals/touch_sensor:
|
|
disable:
|
|
- if: SOC_TOUCH_SENSOR_SUPPORTED != 1
|
|
|
|
examples/peripherals/touch_sensor/touch_element:
|
|
enable:
|
|
- if: IDF_TARGET in ["esp32s2", "esp32s3"]
|
|
reason: only supports esp32s2 and esp32s3
|
|
|
|
examples/peripherals/touch_sensor/touch_sensor_v1:
|
|
disable:
|
|
- if: SOC_TOUCH_VERSION_1 != 1
|
|
|
|
examples/peripherals/touch_sensor/touch_sensor_v2:
|
|
disable:
|
|
- if: SOC_TOUCH_VERSION_2 != 1
|
|
|
|
examples/peripherals/twai/twai_alert_and_recovery:
|
|
disable:
|
|
- if: SOC_TWAI_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32"]
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/twai/twai_network:
|
|
disable:
|
|
- if: SOC_TWAI_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32"]
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/twai/twai_self_test:
|
|
disable:
|
|
- if: SOC_TWAI_SUPPORTED != 1
|
|
disable_test:
|
|
- if: IDF_TARGET not in ["esp32"]
|
|
temporary: true
|
|
reason: lack of runners
|
|
|
|
examples/peripherals/uart/uart_echo_rs485:
|
|
enable:
|
|
- if: INCLUDE_DEFAULT == 1
|
|
|
|
examples/peripherals/usb:
|
|
disable:
|
|
- if: SOC_USB_OTG_SUPPORTED != 1
|
|
|
|
examples/peripherals/wave_gen:
|
|
enable:
|
|
- if: IDF_TARGET == "esp32"
|
|
temporary: true
|
|
reason: the other targets are not tested yet
|