mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
104 lines
4.5 KiB
Markdown
104 lines
4.5 KiB
Markdown
# Examples
|
|
|
|
This directory contains a range of example ESP-IDF projects. These examples are intended to demonstrate parts of the ESP-IDF functionality, and to provide code that you can copy and adapt into your own projects.
|
|
|
|
## Example Layout
|
|
|
|
The examples are grouped into subdirectories by category. Each category directory contains one or more example projects:
|
|
|
|
- `bluetooth/bluedroid` Classic BT, BLE and coex examples using default Bluedroid host stack.
|
|
- `bluetooth/nimble` BLE examples using NimBLE host stack.
|
|
- `bluetooth/esp_ble_mesh` ESP BLE Mesh examples.
|
|
- `bluetooth/hci` HCI transport (VHCI and HCI UART) examples.
|
|
- `build_system` Examples of build system features.
|
|
- `cxx` C++ language utilization examples and experimental components.
|
|
- `ethernet` Ethernet network examples.
|
|
- `get-started` Simple examples with minimal functionality. Good start point for beginners.
|
|
- `ieee802154` IEEE802.15.4 examples.
|
|
- `mesh` Wi-Fi Mesh examples.
|
|
- `network` Examples related to general network environment, test & analysis.
|
|
- `openthread` OpenThread examples.
|
|
- `peripherals` Examples showing driver functionality for the various onboard ESP32 peripherals.
|
|
- `protocols` Examples showing network protocol interactions.
|
|
- `provisioning` Wi-Fi provisioning examples.
|
|
- `security` Examples about security features.
|
|
- `storage` Examples showing data storage methods using SPI flash, external storage like the SD/MMC interface and flash partitioning.
|
|
- `system` Demonstrates some internal chip features, or debugging & development tools.
|
|
- `wifi` Advanced Wi-Fi features (For network protocol examples, see `protocols` instead.)
|
|
- `Zigbee` Zigbee network and device examples.
|
|
|
|
In addition to these examples, `commmon_components` directory contains code shared by several examples.
|
|
|
|
## Using Examples
|
|
|
|
Before building an example, follow the [ESP-IDF Getting Started](https://idf.espressif.com/) to ensure you have the required development environment.
|
|
|
|
### Set Chip Target
|
|
|
|
First of all, your target must be supported by both:
|
|
|
|
- **By your ESP-IDF version**: For the full list of supported targets, run:
|
|
```
|
|
idf.py --list-targets
|
|
```
|
|
- **By this example**: For the full list of supported targets, refer to the supported targets table at the top of this README.
|
|
|
|
After you make sure that your target is supported, go to your example project directory and [set the chip target](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/tools/idf-py.html#select-the-target-chip-set-target):
|
|
|
|
```
|
|
idf.py set-target <target>
|
|
```
|
|
|
|
For example, to set esp32 as the chip target, run:
|
|
|
|
```
|
|
idf.py set-target esp32
|
|
```
|
|
|
|
|
|
### Configure the Project
|
|
|
|
For information about Kconfig options, see [Project Configuration](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html) > ESP Timer (High Resolution Timer).
|
|
|
|
To conveniently check or modify Kconfig options for this example in a project configuration menu, run:
|
|
|
|
```
|
|
idf.py menuconfig
|
|
```
|
|
|
|
|
|
### Build and Flash
|
|
|
|
Execute the following command to build the project, flash it to your development board, and run the monitor tool to view the serial output:
|
|
|
|
```
|
|
idf.py build flash monitor
|
|
```
|
|
|
|
This command can be reduced to `idf.py flash monitor`.
|
|
|
|
If the above command fails, check the log on the serial monitor which usually provides information on the possible cause of the issue.
|
|
|
|
To exit the serial monitor, use `Ctrl` + `]`.
|
|
|
|
|
|
## Running Test Python Script (pytest)
|
|
|
|
Some of the examples have `pytest_....py` scripts that are using the `pytest` as the test framework. For detailed information, please refer to the "Run the Tests Locally" Section under [ESP-IDF tests in Pytest documentation](../docs/en/contribute/esp-idf-tests-with-pytest.rst)
|
|
|
|
Using `pytest` is the recommended way to write new tests. We will migrate all the example test scripts to this new framework soon.
|
|
|
|
## Copying Examples
|
|
|
|
Each example is a standalone project. The examples _do not have to be inside the esp-idf directory_. You can copy an example directory to anywhere on your computer in order to make a copy that you can modify and work with.
|
|
|
|
The `IDF_PATH` environment variable is the only thing that connects the example to the rest of ESP-IDF.
|
|
|
|
If you're looking for a more bare-bones project to start from, try [esp-idf-template](https://github.com/espressif/esp-idf-template).
|
|
|
|
## Contributing Examples
|
|
|
|
If you have a new example you think we'd like, please consider sending it to us as a Pull Request.
|
|
|
|
In the ESP-IDF documentation, you can find a ["Creating Examples" page](../docs/en/contribute/creating-examples.rst) which lays out the steps to creating a top quality example.
|