mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

MinZai97 fde5e93ab5 feat: replace lightdriver, and support more chips in ble mesh examples		2024-02-21 15:32:58 +08:00
..
df_client	feat: replace lightdriver, and support more chips in ble mesh examples	2024-02-21 15:32:58 +08:00
df_server	feat: replace lightdriver, and support more chips in ble mesh examples	2024-02-21 15:32:58 +08:00
tutorial	feat(ble_mesh): Support Bluetooth Mesh Protocol v1.1 (Preview)	2023-09-08 21:37:33 +08:00
README.md	fix(ble_mesh): Miscellaneous update for ble mesh	2023-09-16 15:58:14 +08:00

README.md

Supported Targets	ESP32	ESP32-C3	ESP32-C6	ESP32-H2	ESP32-S3

Directed Forwarding

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example is primarily intended to demonstrate the newly added directed forwarding feature in Mesh Protocol v1.1.

How to use example

Please refer to this tutorial for detailed instructions on how to run it.

Hardware Required

You need prepare at least two ESP series development boards. We recommend using the ESP32-C3-DevKitM-1 or ESP32-C6-DevKitC-1. Alternatively, you can use other development boards, but ensure that each board has at least one LED and one button for operation.

Configure the project

idf.py menuconfig

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

After all devices have joined the network, you need to press the button on the provisioner(the device which runs df_client) to complete the final setup. Once the setup is complete, provisioner will provide the following output:

You could click to send message by directed forwarding
After the message handled, you could click again to send message by flooding

After seeing the above output, you can press the button again to send a network message. When the message is sent in directed forwarding, the following output will be displayed:

Will send a message to node(`node unicast`) with DF

When the message is sent in a flooding, the following output will be displayed:

Will send a message to node(`node unicast`) with Flooding

Troubleshooting

See common troubleshooting for Directed Forwarding examples from ESP-BLE-MESH FAQ.

(For any technical queries, please open an issue on GitHub. We will get back to you as soon as possible.)