esp-idf/examples/wifi
Nachiket Kukade 09ab053ea1 esp_wifi: Fix some PMF and FTM issues
1. Update wifi lib with fix for dropping bcast PMF deauths/disassocs
   with certain reason codes
2. Fix FTM not working in connected state and some other bugs
2021-08-11 17:02:29 +05:30
..
espnow example: Fix espnow stuck issue 2021-01-21 11:37:10 +08:00
fast_scan Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
ftm esp_wifi: Fix some PMF and FTM issues 2021-08-11 17:02:29 +05:30
getting_started Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
iperf test: add ethernet iperf example test case 2021-07-28 09:39:02 +08:00
power_save light sleep: add wifi power save example for esp32s3 2021-08-04 21:31:45 +08:00
roaming Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
scan Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
simple_sniffer examples: Update Ethernet examples to use new PHY LAN87xx init function 2021-07-28 19:34:05 +08:00
smart_config esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
wifi_easy_connect/dpp-enrollee Add DPP Enrollee example 2021-01-25 13:26:33 +05:30
wpa2_enterprise esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA 2021-01-19 11:55:44 +08:00
wps Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
README.md Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • simple_sniffer demonstrates basic usage of WiFi sniffer mode by saving packets into SD card with pcap format.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.