alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
86e9acc2c9
esp-idf/examples/protocols/asio/udp_echo_server
History
Ivan Grokhotkov aa4a7804ec examples/protocols/asio: use common network component
2019-04-15 03:32:05 +00:00
..
main examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
asio_udp_server_test.py examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
CMakeLists.txt examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
Makefile examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
README.md examples/protocols/asio: use common network component 2019-04-15 03:32:05 +00:00
sdkconfig.defaults asio: initial idf port of asio library without ssl 2018-07-30 06:28:43 +00:00

README.md

Asio UDP echo server example

Simple Asio UDP echo server using WiFi STA or Ethernet.

Example workflow

  • Wi-Fi or Ethernet connection is established, and IP address is obtained.
  • Asio UDP server is started on port number defined through make menuconfig
  • Server receives and echoes back messages transmitted from client

Running the example

  • Run make menuconfig to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • Set server port number in menuconfig, "Example configuration".
  • Run make flash monitor to build and upload the example to your board and connect to it's serial terminal.
  • Wait for the board to connect to WiFi or Ethernet (note the IP address).
  • You can now send a UDP message and check it is repeated, for example using netcat nc -u IP PORT.

See the README.md file in the upper level 'examples' directory for more information about examples.