mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
554 lines
19 KiB
C
554 lines
19 KiB
C
/* UDP MultiCast Send/Receive Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <string.h>
|
|
#include <sys/param.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/event_groups.h"
|
|
#include "esp_system.h"
|
|
#include "esp_wifi.h"
|
|
#include "esp_event_loop.h"
|
|
#include "esp_log.h"
|
|
#include "nvs_flash.h"
|
|
|
|
#include "lwip/err.h"
|
|
#include "lwip/sockets.h"
|
|
#include "lwip/sys.h"
|
|
#include <lwip/netdb.h>
|
|
|
|
/* The examples use simple WiFi configuration that you can set via
|
|
'make menuconfig'.
|
|
|
|
If you'd rather not, just change the below entries to strings with
|
|
the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
|
|
*/
|
|
#define EXAMPLE_WIFI_SSID CONFIG_WIFI_SSID
|
|
#define EXAMPLE_WIFI_PASS CONFIG_WIFI_PASSWORD
|
|
|
|
#define UDP_PORT CONFIG_EXAMPLE_PORT
|
|
|
|
#define MULTICAST_LOOPBACK CONFIG_EXAMPLE_LOOPBACK
|
|
|
|
#define MULTICAST_TTL CONFIG_EXAMPLE_MULTICAST_TTL
|
|
|
|
#define MULTICAST_IPV4_ADDR CONFIG_EXAMPLE_MULTICAST_IPV4_ADDR
|
|
#define MULTICAST_IPV6_ADDR CONFIG_EXAMPLE_MULTICAST_IPV6_ADDR
|
|
|
|
#define LISTEN_DEFAULT_IF CONFIG_EXAMPLE_LISTEN_DEFAULT_IF
|
|
|
|
/* FreeRTOS event group to signal when we are connected & ready to make a request */
|
|
static EventGroupHandle_t wifi_event_group;
|
|
|
|
/* The event group allows multiple bits for each event,
|
|
we use two - one for IPv4 "got ip", and
|
|
one for IPv6 "got ip". */
|
|
const int IPV4_GOTIP_BIT = BIT0;
|
|
const int IPV6_GOTIP_BIT = BIT1;
|
|
|
|
static const char *TAG = "multicast";
|
|
#ifdef CONFIG_EXAMPLE_IPV4
|
|
static const char *V4TAG = "mcast-ipv4";
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
static const char *V6TAG = "mcast-ipv6";
|
|
#endif
|
|
|
|
static esp_err_t event_handler(void *ctx, system_event_t *event)
|
|
{
|
|
switch(event->event_id) {
|
|
case SYSTEM_EVENT_STA_START:
|
|
esp_wifi_connect();
|
|
break;
|
|
case SYSTEM_EVENT_STA_CONNECTED:
|
|
/* enable ipv6 */
|
|
tcpip_adapter_create_ip6_linklocal(TCPIP_ADAPTER_IF_STA);
|
|
break;
|
|
case SYSTEM_EVENT_STA_GOT_IP:
|
|
xEventGroupSetBits(wifi_event_group, IPV4_GOTIP_BIT);
|
|
break;
|
|
case SYSTEM_EVENT_STA_DISCONNECTED:
|
|
/* This is a workaround as ESP32 WiFi libs don't currently
|
|
auto-reassociate. */
|
|
esp_wifi_connect();
|
|
xEventGroupClearBits(wifi_event_group, IPV4_GOTIP_BIT);
|
|
xEventGroupClearBits(wifi_event_group, IPV6_GOTIP_BIT);
|
|
break;
|
|
case SYSTEM_EVENT_AP_STA_GOT_IP6:
|
|
xEventGroupSetBits(wifi_event_group, IPV6_GOTIP_BIT);
|
|
default:
|
|
break;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void initialise_wifi(void)
|
|
{
|
|
tcpip_adapter_init();
|
|
wifi_event_group = xEventGroupCreate();
|
|
ESP_ERROR_CHECK( esp_event_loop_init(event_handler, NULL) );
|
|
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
|
ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
|
|
ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
|
|
wifi_config_t wifi_config = {
|
|
.sta = {
|
|
.ssid = EXAMPLE_WIFI_SSID,
|
|
.password = EXAMPLE_WIFI_PASS,
|
|
},
|
|
};
|
|
ESP_LOGI(TAG, "Setting WiFi configuration SSID %s...", wifi_config.sta.ssid);
|
|
ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
|
|
ESP_ERROR_CHECK( esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
|
|
ESP_ERROR_CHECK( esp_wifi_start() );
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4
|
|
/* Add a socket, either IPV4-only or IPV6 dual mode, to the IPV4
|
|
multicast group */
|
|
static int socket_add_ipv4_multicast_group(int sock, bool assign_source_if)
|
|
{
|
|
struct ip_mreq imreq = { 0 };
|
|
struct in_addr iaddr = { 0 };
|
|
int err = 0;
|
|
// Configure source interface
|
|
#if USE_DEFAULT_IF
|
|
imreq.imr_interface.s_addr = IPADDR_ANY;
|
|
#else
|
|
tcpip_adapter_ip_info_t ip_info = { 0 };
|
|
err = tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_STA, &ip_info);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(V4TAG, "Failed to get IP address info. Error 0x%x", err);
|
|
goto err;
|
|
}
|
|
inet_addr_from_ipaddr(&iaddr, &ip_info.ip);
|
|
#endif
|
|
// Configure multicast address to listen to
|
|
err = inet_aton(MULTICAST_IPV4_ADDR, &imreq.imr_multiaddr.s_addr);
|
|
if (err != 1) {
|
|
ESP_LOGE(V4TAG, "Configured IPV4 multicast address '%s' is invalid.", MULTICAST_IPV4_ADDR);
|
|
goto err;
|
|
}
|
|
ESP_LOGI(TAG, "Configured IPV4 Multicast address %s", inet_ntoa(imreq.imr_multiaddr.s_addr));
|
|
if (!IP_MULTICAST(ntohl(imreq.imr_multiaddr.s_addr))) {
|
|
ESP_LOGW(V4TAG, "Configured IPV4 multicast address '%s' is not a valid multicast address. This will probably not work.", MULTICAST_IPV4_ADDR);
|
|
}
|
|
|
|
if (assign_source_if) {
|
|
// Assign the IPv4 multicast source interface, via its IP
|
|
// (only necessary if this socket is IPV4 only)
|
|
err = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_IF, &iaddr,
|
|
sizeof(struct in_addr));
|
|
if (err < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to set IP_MULTICAST_IF. Error %d", errno);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
err = setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP,
|
|
&imreq, sizeof(struct ip_mreq));
|
|
if (err < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to set IP_ADD_MEMBERSHIP. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
err:
|
|
return err;
|
|
}
|
|
#endif /* CONFIG_EXAMPLE_IPV4 */
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4_ONLY
|
|
static int create_multicast_ipv4_socket()
|
|
{
|
|
struct sockaddr_in saddr = { 0 };
|
|
int sock = -1;
|
|
int err = 0;
|
|
|
|
sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
|
|
if (sock < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to create socket. Error %d", errno);
|
|
return -1;
|
|
}
|
|
|
|
// Bind the socket to any address
|
|
saddr.sin_family = PF_INET;
|
|
saddr.sin_port = htons(UDP_PORT);
|
|
saddr.sin_addr.s_addr = htonl(INADDR_ANY);
|
|
err = bind(sock, (struct sockaddr *)&saddr, sizeof(struct sockaddr_in));
|
|
if (err < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to bind socket. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
|
|
// Assign multicast TTL (set separately from normal interface TTL)
|
|
uint8_t ttl = MULTICAST_TTL;
|
|
setsockopt(sock, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, sizeof(uint8_t));
|
|
if (err < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to set IP_MULTICAST_TTL. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
#if MULTICAST_LOOPBACK
|
|
// select whether multicast traffic should be received by this device, too
|
|
// (if setsockopt() is not called, the default is no)
|
|
uint8_t loopback_val = MULTICAST_LOOPBACK;
|
|
err = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,
|
|
&loopback_val, sizeof(uint8_t));
|
|
if (err < 0) {
|
|
ESP_LOGE(V4TAG, "Failed to set IP_MULTICAST_LOOP. Error %d", errno);
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
// this is also a listening socket, so add it to the multicast
|
|
// group for listening...
|
|
err = socket_add_ipv4_multicast_group(sock, true);
|
|
if (err < 0) {
|
|
goto err;
|
|
}
|
|
|
|
// All set, socket is configured for sending and receiving
|
|
return sock;
|
|
|
|
err:
|
|
close(sock);
|
|
return -1;
|
|
}
|
|
#endif /* CONFIG_EXAMPLE_IPV4_ONLY */
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
static int create_multicast_ipv6_socket()
|
|
{
|
|
struct sockaddr_in6 saddr = { 0 };
|
|
struct in6_addr if_inaddr = { 0 };
|
|
struct ip6_addr if_ipaddr = { 0 };
|
|
struct ip6_mreq v6imreq = { 0 };
|
|
int sock = -1;
|
|
int err = 0;
|
|
|
|
sock = socket(PF_INET6, SOCK_DGRAM, IPPROTO_IPV6);
|
|
if (sock < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to create socket. Error %d", errno);
|
|
return -1;
|
|
}
|
|
|
|
// Bind the socket to any address
|
|
saddr.sin6_family = AF_INET6;
|
|
saddr.sin6_port = htons(UDP_PORT);
|
|
bzero(&saddr.sin6_addr.un, sizeof(saddr.sin6_addr.un));
|
|
err = bind(sock, (struct sockaddr *)&saddr, sizeof(struct sockaddr_in6));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to bind socket. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
// Selct the interface to use as multicast source for this socket.
|
|
#if USE_DEFAULT_IF
|
|
bzero(&if_inaddr.un, sizeof(if_inaddr.un));
|
|
#else
|
|
// Read interface adapter link-local address and use it
|
|
// to bind the multicast IF to this socket.
|
|
//
|
|
// (Note the interface may have other non-LL IPV6 addresses as well,
|
|
// but it doesn't matter in this context as the address is only
|
|
// used to identify the interface.)
|
|
err = tcpip_adapter_get_ip6_linklocal(TCPIP_ADAPTER_IF_STA, &if_ipaddr);
|
|
inet6_addr_from_ip6addr(&if_inaddr, &if_ipaddr);
|
|
if (err != ESP_OK) {
|
|
ESP_LOGE(V6TAG, "Failed to get IPV6 LL address. Error 0x%x", err);
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
// Assign the multicast source interface, via its IP
|
|
err = setsockopt(sock, IPPROTO_IPV6, IPV6_MULTICAST_IF, &if_inaddr,
|
|
sizeof(struct in6_addr));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to set IPV6_MULTICAST_IF. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
// Assign multicast TTL (set separately from normal interface TTL)
|
|
uint8_t ttl = MULTICAST_TTL;
|
|
setsockopt(sock, IPPROTO_IPV6, IPV6_MULTICAST_HOPS, &ttl, sizeof(uint8_t));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to set IPV6_MULTICAST_HOPS. Error %d", errno);
|
|
goto err;
|
|
}
|
|
|
|
#if MULTICAST_LOOPBACK
|
|
// select whether multicast traffic should be received by this device, too
|
|
// (if setsockopt() is not called, the default is no)
|
|
uint8_t loopback_val = MULTICAST_LOOPBACK;
|
|
err = setsockopt(sock, IPPROTO_IPV6, IPV6_MULTICAST_LOOP,
|
|
&loopback_val, sizeof(uint8_t));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to set IPV6_MULTICAST_LOOP. Error %d", errno);
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
// this is also a listening socket, so add it to the multicast
|
|
// group for listening...
|
|
|
|
// Configure source interface
|
|
#if USE_DEFAULT_IF
|
|
v6imreq.imr_interface.s_addr = IPADDR_ANY;
|
|
#else
|
|
inet6_addr_from_ip6addr(&v6imreq.ipv6mr_interface, &if_ipaddr);
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
// Configure multicast address to listen to
|
|
err = inet6_aton(MULTICAST_IPV6_ADDR, &v6imreq.ipv6mr_multiaddr);
|
|
if (err != 1) {
|
|
ESP_LOGE(V6TAG, "Configured IPV6 multicast address '%s' is invalid.", MULTICAST_IPV6_ADDR);
|
|
goto err;
|
|
}
|
|
ESP_LOGI(TAG, "Configured IPV6 Multicast address %s", inet6_ntoa(v6imreq.ipv6mr_multiaddr));
|
|
ip6_addr_t multi_addr;
|
|
inet6_addr_to_ip6addr(&multi_addr, &v6imreq.ipv6mr_multiaddr);
|
|
if (!ip6_addr_ismulticast(&multi_addr)) {
|
|
ESP_LOGW(V6TAG, "Configured IPV6 multicast address '%s' is not a valid multicast address. This will probably not work.", MULTICAST_IPV6_ADDR);
|
|
}
|
|
|
|
err = setsockopt(sock, IPPROTO_IPV6, IPV6_ADD_MEMBERSHIP,
|
|
&v6imreq, sizeof(struct ip6_mreq));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to set IPV6_ADD_MEMBERSHIP. Error %d", errno);
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_EXAMPLE_IPV4_V6
|
|
// Add the common IPV4 config options
|
|
err = socket_add_ipv4_multicast_group(sock, false);
|
|
if (err < 0) {
|
|
goto err;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_EXAMPLE_IPV4_V6
|
|
int only = 0;
|
|
#else
|
|
int only = 1; /* IPV6-only socket */
|
|
#endif
|
|
err = setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, &only, sizeof(int));
|
|
if (err < 0) {
|
|
ESP_LOGE(V6TAG, "Failed to set IPV6_V6ONLY. Error %d", errno);
|
|
goto err;
|
|
}
|
|
ESP_LOGI(TAG, "Socket set IPV6-only");
|
|
|
|
// All set, socket is configured for sending and receiving
|
|
return sock;
|
|
|
|
err:
|
|
close(sock);
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
static void mcast_example_task(void *pvParameters)
|
|
{
|
|
while (1) {
|
|
/* Wait for all the IPs we care about to be set
|
|
*/
|
|
uint32_t bits = 0;
|
|
#ifdef CONFIG_EXAMPLE_IPV4
|
|
bits |= IPV4_GOTIP_BIT;
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
bits |= IPV6_GOTIP_BIT;
|
|
#endif
|
|
ESP_LOGI(TAG, "Waiting for AP connection...");
|
|
xEventGroupWaitBits(wifi_event_group, bits, false, true, portMAX_DELAY);
|
|
ESP_LOGI(TAG, "Connected to AP");
|
|
|
|
int sock;
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4_ONLY
|
|
sock = create_multicast_ipv4_socket();
|
|
if (sock < 0) {
|
|
ESP_LOGE(TAG, "Failed to create IPv4 multicast socket");
|
|
}
|
|
#else
|
|
sock = create_multicast_ipv6_socket();
|
|
if (sock < 0) {
|
|
ESP_LOGE(TAG, "Failed to create IPv6 multicast socket");
|
|
}
|
|
#endif
|
|
|
|
if (sock < 0) {
|
|
// Nothing to do!
|
|
vTaskDelay(5 / portTICK_PERIOD_MS);
|
|
continue;
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4
|
|
// set destination multicast addresses for sending from these sockets
|
|
struct sockaddr_in sdestv4 = {
|
|
.sin_family = PF_INET,
|
|
.sin_port = htons(UDP_PORT),
|
|
};
|
|
// We know this inet_aton will pass because we did it above already
|
|
inet_aton(MULTICAST_IPV4_ADDR, &sdestv4.sin_addr.s_addr);
|
|
#endif
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
struct sockaddr_in6 sdestv6 = {
|
|
.sin6_family = PF_INET6,
|
|
.sin6_port = htons(UDP_PORT),
|
|
};
|
|
// We know this inet_aton will pass because we did it above already
|
|
inet6_aton(MULTICAST_IPV6_ADDR, &sdestv6.sin6_addr);
|
|
#endif
|
|
|
|
// Loop waiting for UDP received, and sending UDP packets if we don't
|
|
// see any.
|
|
int err = 1;
|
|
while (err > 0) {
|
|
struct timeval tv = {
|
|
.tv_sec = 2,
|
|
.tv_usec = 0,
|
|
};
|
|
fd_set rfds;
|
|
FD_ZERO(&rfds);
|
|
FD_SET(sock, &rfds);
|
|
|
|
int s = select(sock + 1, &rfds, NULL, NULL, &tv);
|
|
if (s < 0) {
|
|
ESP_LOGE(TAG, "Select failed: errno %d", errno);
|
|
err = -1;
|
|
break;
|
|
}
|
|
else if (s > 0) {
|
|
if (FD_ISSET(sock, &rfds)) {
|
|
// Incoming datagram received
|
|
char recvbuf[48];
|
|
char raddr_name[32] = { 0 };
|
|
|
|
struct sockaddr_in6 raddr; // Large enough for both IPv4 or IPv6
|
|
socklen_t socklen = sizeof(raddr);
|
|
int len = recvfrom(sock, recvbuf, sizeof(recvbuf)-1, 0,
|
|
(struct sockaddr *)&raddr, &socklen);
|
|
if (len < 0) {
|
|
ESP_LOGE(TAG, "multicast recvfrom failed: errno %d", errno);
|
|
err = -1;
|
|
break;
|
|
}
|
|
|
|
// Get the sender's address as a string
|
|
#ifdef CONFIG_EXAMPLE_IPV4
|
|
if (raddr.sin6_family == PF_INET) {
|
|
inet_ntoa_r(((struct sockaddr_in *)&raddr)->sin_addr.s_addr,
|
|
raddr_name, sizeof(raddr_name)-1);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
if (raddr.sin6_family == PF_INET6) {
|
|
inet6_ntoa_r(raddr.sin6_addr, raddr_name, sizeof(raddr_name)-1);
|
|
}
|
|
#endif
|
|
ESP_LOGI(TAG, "received %d bytes from %s:", len, raddr_name);
|
|
|
|
recvbuf[len] = 0; // Null-terminate whatever we received and treat like a string...
|
|
ESP_LOGI(TAG, "%s", recvbuf);
|
|
}
|
|
}
|
|
else { // s == 0
|
|
// Timeout passed with no incoming data, so send something!
|
|
static int send_count;
|
|
const char sendfmt[] = "Multicast #%d sent by ESP32\n";
|
|
char sendbuf[48];
|
|
char addrbuf[32] = { 0 };
|
|
int len = snprintf(sendbuf, sizeof(sendbuf), sendfmt, send_count++);
|
|
if (len > sizeof(sendbuf)) {
|
|
ESP_LOGE(TAG, "Overflowed multicast sendfmt buffer!!");
|
|
send_count = 0;
|
|
err = -1;
|
|
break;
|
|
}
|
|
|
|
struct addrinfo hints = {
|
|
.ai_flags = AI_PASSIVE,
|
|
.ai_socktype = SOCK_DGRAM,
|
|
};
|
|
struct addrinfo *res;
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4 // Send an IPv4 multicast packet
|
|
|
|
#ifdef CONFIG_EXAMPLE_IPV4_ONLY
|
|
hints.ai_family = AF_INET; // For an IPv4 socket
|
|
#else
|
|
hints.ai_family = AF_INET6; // For an IPv4 socket with V4 mapped addresses
|
|
hints.ai_flags |= AI_V4MAPPED;
|
|
#endif
|
|
int err = getaddrinfo(CONFIG_EXAMPLE_MULTICAST_IPV4_ADDR,
|
|
NULL,
|
|
&hints,
|
|
&res);
|
|
if (err < 0) {
|
|
ESP_LOGE(TAG, "getaddrinfo() failed for IPV4 destination address. error: %d", err);
|
|
break;
|
|
}
|
|
#ifdef CONFIG_EXAMPLE_IPV4_ONLY
|
|
((struct sockaddr_in *)res->ai_addr)->sin_port = htons(UDP_PORT);
|
|
inet_ntoa_r(((struct sockaddr_in *)res->ai_addr)->sin_addr, addrbuf, sizeof(addrbuf)-1);
|
|
ESP_LOGI(TAG, "Sending to IPV4 multicast address %s:%d...", addrbuf, UDP_PORT);
|
|
#else
|
|
((struct sockaddr_in6 *)res->ai_addr)->sin6_port = htons(UDP_PORT);
|
|
inet6_ntoa_r(((struct sockaddr_in6 *)res->ai_addr)->sin6_addr, addrbuf, sizeof(addrbuf)-1);
|
|
ESP_LOGI(TAG, "Sending to IPV6 (V4 mapped) multicast address %s port %d (%s)...", addrbuf, UDP_PORT, CONFIG_EXAMPLE_MULTICAST_IPV4_ADDR);
|
|
#endif
|
|
err = sendto(sock, sendbuf, len, 0, res->ai_addr, res->ai_addrlen);
|
|
freeaddrinfo(res);
|
|
if (err < 0) {
|
|
ESP_LOGE(TAG, "IPV4 sendto failed. errno: %d", errno);
|
|
break;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_EXAMPLE_IPV6
|
|
hints.ai_family = AF_INET6;
|
|
hints.ai_protocol = 0;
|
|
err = getaddrinfo(CONFIG_EXAMPLE_MULTICAST_IPV6_ADDR,
|
|
NULL,
|
|
&hints,
|
|
&res);
|
|
if (err < 0) {
|
|
ESP_LOGE(TAG, "getaddrinfo() failed for IPV6 destination address. error: %d", err);
|
|
break;
|
|
}
|
|
|
|
struct sockaddr_in6 *s6addr = (struct sockaddr_in6 *)res->ai_addr;
|
|
s6addr->sin6_port = htons(UDP_PORT);
|
|
inet6_ntoa_r(s6addr->sin6_addr, addrbuf, sizeof(addrbuf)-1);
|
|
ESP_LOGI(TAG, "Sending to IPV6 multicast address %s port %d...", addrbuf, UDP_PORT);
|
|
err = sendto(sock, sendbuf, len, 0, res->ai_addr, res->ai_addrlen);
|
|
freeaddrinfo(res);
|
|
if (err < 0) {
|
|
ESP_LOGE(TAG, "IPV6 sendto failed. errno: %d", errno);
|
|
break;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
ESP_LOGE(TAG, "Shutting down socket and restarting...");
|
|
shutdown(sock, 0);
|
|
close(sock);
|
|
}
|
|
|
|
}
|
|
|
|
void app_main()
|
|
{
|
|
ESP_ERROR_CHECK( nvs_flash_init() );
|
|
initialise_wifi();
|
|
xTaskCreate(&mcast_example_task, "mcast_task", 4096, NULL, 5, NULL);
|
|
}
|