esp-idf/components/esp_system/port/brownout.c

104 lines
2.9 KiB
C

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include "esp_private/system_internal.h"
#include "driver/rtc_cntl.h"
#include "esp_rom_sys.h"
#include "soc/soc.h"
#include "soc/cpu.h"
#include "soc/rtc_periph.h"
#include "hal/cpu_hal.h"
#include "hal/brownout_hal.h"
#include "sdkconfig.h"
#if defined(CONFIG_ESP32_BROWNOUT_DET_LVL)
#define BROWNOUT_DET_LVL CONFIG_ESP32_BROWNOUT_DET_LVL
#elif defined(CONFIG_ESP32S2_BROWNOUT_DET_LVL)
#define BROWNOUT_DET_LVL CONFIG_ESP32S2_BROWNOUT_DET_LVL
#elif defined(CONFIG_ESP32S3_BROWNOUT_DET_LVL)
#define BROWNOUT_DET_LVL CONFIG_ESP32S3_BROWNOUT_DET_LVL
#elif defined(CONFIG_ESP32C3_BROWNOUT_DET_LVL)
#define BROWNOUT_DET_LVL CONFIG_ESP32C3_BROWNOUT_DET_LVL
#else
#define BROWNOUT_DET_LVL 0
#endif
#if SOC_BROWNOUT_RESET_SUPPORTED
#define BROWNOUT_RESET_EN true
#else
#define BROWNOUT_RESET_EN false
#endif // SOC_BROWNOUT_RESET_SUPPORTED
#ifndef SOC_BROWNOUT_RESET_SUPPORTED
static void rtc_brownout_isr_handler(void *arg)
{
/* Normally RTC ISR clears the interrupt flag after the application-supplied
* handler returns. Since restart is called here, the flag needs to be
* cleared manually.
*/
brownout_hal_intr_clear();
/* Stall the other CPU to make sure the code running there doesn't use UART
* at the same time as the following esp_rom_printf.
*/
esp_cpu_stall(!cpu_hal_get_core_id());
esp_reset_reason_set_hint(ESP_RST_BROWNOUT);
esp_rom_printf("\r\nBrownout detector was triggered\r\n\r\n");
esp_restart_noos();
}
#endif // not SOC_BROWNOUT_RESET_SUPPORTED
void esp_brownout_init(void)
{
brownout_hal_config_t cfg = {
.threshold = BROWNOUT_DET_LVL,
.enabled = true,
.reset_enabled = BROWNOUT_RESET_EN,
.flash_power_down = true,
.rf_power_down = true,
};
brownout_hal_config(&cfg);
#ifndef SOC_BROWNOUT_RESET_SUPPORTED
rtc_isr_register(rtc_brownout_isr_handler, NULL, RTC_CNTL_BROWN_OUT_INT_ENA_M);
brownout_hal_intr_enable(true);
#endif // not SOC_BROWNOUT_RESET_SUPPORTED
}
void esp_brownout_disable(void)
{
brownout_hal_config_t cfg = {
.enabled = false,
};
brownout_hal_config(&cfg);
#ifndef SOC_BROWNOUT_RESET_SUPPORTED
brownout_hal_intr_enable(false);
rtc_isr_deregister(rtc_brownout_isr_handler, NULL);
#endif // not SOC_BROWNOUT_RESET_SUPPORTED
}