mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Frantisek Hrbata fbe8bf89ee fix: properly resolve component dependencies There is currently a bug in the __build_resolve_and_add_req function in tools/cmake/build.cmake where the check for registered component requirements is incorrectly applied to the component itself rather than its dependencies. This issue likely originated from a typo, using component_target instead of _component_target. To prevent further confusion, _component_target has been renamed to _req_target. Fixing this revealed multiple incorrect dependencies for the Linux target, which have now been resolved by explicitly specifying the dependencies for the Linux target. Closes https://github.com/espressif/esp-idf/issues/13447 Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>		2024-05-30 22:01:55 +08:00
..
main	fix: properly resolve component dependencies	2024-05-30 22:01:55 +08:00
CMakeLists.txt	tools: Increase the minimal supported CMake version to 3.16	2022-06-01 06:35:02 +00:00
pytest_hello_world.py	feat(ci): Added CI host test for the linux target on MacOS runners	2024-05-24 16:29:22 +02:00
README.md	feat(esp32c61): final introduce helloworld support	2024-04-02 10:50:52 +08:00
sdkconfig.ci	example_tests: Deletes usage esp32c3 ECO0 in CI (by default ECO3)	2021-09-24 13:55:07 +08:00

README.md

Supported Targets	ESP32	ESP32-C2	ESP32-C3	ESP32-C5	ESP32-C6	ESP32-C61	ESP32-H2	ESP32-P4	ESP32-S2	ESP32-S3	Linux

Hello World Example

Starts a FreeRTOS task to print "Hello World".

(See the README.md file in the upper level 'examples' directory for more information about examples.)

How to use example

Follow detailed instructions provided specifically for this example.

Select the instructions depending on Espressif chip installed on your development board:

Example folder contents

The project hello_world contains one source file in C language hello_world_main.c. The file is located in folder main.

ESP-IDF projects are built using CMake. The project build configuration is contained in CMakeLists.txt files that provide set of directives and instructions describing the project's source files and targets (executable, library, or both).

Below is short explanation of remaining files in the project folder.

├── CMakeLists.txt
├── pytest_hello_world.py      Python script used for automated testing
├── main
│   ├── CMakeLists.txt
│   └── hello_world_main.c
└── README.md                  This is the file you are currently reading

For more information on structure and contents of ESP-IDF projects, please refer to Section Build System of the ESP-IDF Programming Guide.

Troubleshooting

Program upload failure
- Hardware connection is not correct: run idf.py -p PORT monitor, and reboot your board to see if there are any output logs.
- The baud rate for downloading is too high: lower your baud rate in the menuconfig menu, and try again.

Technical support and feedback

Please use the following feedback channels:

For technical queries, go to the esp32.com forum
For a feature request or bug report, create a GitHub issue

We will get back to you as soon as possible.