mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Tomas Rezucha 8f674f5952 usb_host: Use CDC driver from component registry		2022-09-08 14:05:38 +02:00
..
main	usb_host: Use CDC driver from component registry	2022-09-08 14:05:38 +02:00
CMakeLists.txt	usb_host: Use CDC driver from component registry	2022-09-08 14:05:38 +02:00
README.md	usb_host: Add Virtual COM Port CDC example	2022-04-22 09:50:46 +02:00
sdkconfig.defaults	usb_host: Add Virtual COM Port CDC example	2022-04-22 09:50:46 +02:00

Supported Targets	ESP32-S2	ESP32-S3

USB CDC-ACM Virtual Com Port example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example shows how to extend CDC-ACM driver for Virtual Communication Port devices, such as CP210x or FTDI FT23x devices.

How to use example

Pick your USB-to-UART device by executing idf.py menuconfig and navigating to Example Configuration -> USB-to-UART device type
Change baudrate and other line coding parameters in cdc_acm_vcp.cpp to match your needs
Now you can use the CDC-ACM to API to control the device and send data. Data are received in handle_rx callback
Try disconnecting and then reconnecting of the USB device to experiment with USB hotplugging

Connect USB_D+, USB_D-, GND and +5V signals of your ESP chip to matching signals on USB to UART converter.

See common pin assignments for USB Device examples from upper level.

Build this project and flash it to the USB host board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.