mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Angus Gratton 800bffb8b0 cmake: Add CMakeLists.txt files for all examples Generating using convert_to_cmake.py, with some minor cleanup		2018-04-30 09:59:20 +10:00
..
main	Provided more meaningful parameter names by renaming 'bit_num' to 'duty_resolution' and 'div_num' to 'clock_divider'	2017-11-15 08:08:12 +01:00
CMakeLists.txt	cmake: Add CMakeLists.txt files for all examples	2018-04-30 09:59:20 +10:00
Makefile	Moved examples to new folders / categories. Removed example numbers from example names	2017-01-16 23:08:35 +01:00
README.md	Updated example and descritpion of LED PWM Controller API	2017-10-06 08:34:27 +02:00

LEDC (LED PWM Controller) Example

This example shows how to control intensity of LEDs using ESP32's on-board hardware LED PWM Controller module.

Functionality

Operations performed by example:

Configuration of two timers (one high speed and the other low speed) that will be clocking four LEDC channels.
Configuration of four channels of LEDC module, two channels will operate in high speed mode and two in low speed mode. Each channel will drive one GPIO / LED.
Initialization of fade service to fade / gradually change intensity of LEDs.
Operation of channels in a loop by cycling through four steps that will drive LEDs as follows:
1. Fade up / increase intensity
2. Fade down / decrease intensity (down to zero)
3. Set steady intensity
4. Set intensity to zero

Connect four LEDs to the following LEDC channels / individual GPIOs: