mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
154 lines
4.5 KiB
Plaintext
154 lines
4.5 KiB
Plaintext
menu "Example Connection Configuration"
|
|
|
|
choice EXAMPLE_CONNECT_INTERFACE
|
|
prompt "Connect using"
|
|
default EXAMPLE_CONNECT_WIFI
|
|
help
|
|
Protocol examples can use Wi-Fi or Ethernet to connect to the network.
|
|
Choose which interface to use.
|
|
|
|
config EXAMPLE_CONNECT_WIFI
|
|
bool "Wi-Fi"
|
|
|
|
config EXAMPLE_CONNECT_ETHERNET
|
|
bool "Ethernet"
|
|
|
|
endchoice
|
|
|
|
config EXAMPLE_WIFI_SSID
|
|
depends on EXAMPLE_CONNECT_WIFI
|
|
string "WiFi SSID"
|
|
default "myssid"
|
|
help
|
|
SSID (network name) for the example to connect to.
|
|
|
|
config EXAMPLE_WIFI_PASSWORD
|
|
depends on EXAMPLE_CONNECT_WIFI
|
|
string "WiFi Password"
|
|
default "mypassword"
|
|
help
|
|
WiFi password (WPA or WPA2) for the example to use.
|
|
Can be left blank if the network has no security set.
|
|
|
|
|
|
choice EXAMPLE_PHY_MODEL
|
|
prompt "Ethernet PHY"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default EXAMPLE_PHY_TLK110
|
|
help
|
|
Select the PHY driver to use for the example.
|
|
|
|
config EXAMPLE_PHY_IP101
|
|
bool "IP101"
|
|
help
|
|
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
|
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
|
|
|
config EXAMPLE_PHY_TLK110
|
|
bool "TI TLK110 PHY"
|
|
help
|
|
Select this to use the TI TLK110 PHY
|
|
|
|
config EXAMPLE_PHY_LAN8720
|
|
bool "Microchip LAN8720 PHY"
|
|
help
|
|
Select this to use the Microchip LAN8720 PHY
|
|
|
|
endchoice
|
|
|
|
|
|
config EXAMPLE_PHY_ADDRESS
|
|
int "PHY Address (0-31)"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default 31
|
|
range 0 31
|
|
help
|
|
Select the PHY Address (0-31) for the hardware configuration and PHY model.
|
|
TLK110 default 31
|
|
LAN8720 default 1 or 0
|
|
|
|
|
|
choice EXAMPLE_PHY_CLOCK_MODE
|
|
prompt "EMAC clock mode"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default EXAMPLE_PHY_CLOCK_GPIO0_IN
|
|
help
|
|
Select external (input on GPIO0) or internal (output on GPIO16 or GPIO17) clock
|
|
|
|
|
|
config EXAMPLE_PHY_CLOCK_GPIO0_IN
|
|
bool "GPIO0 input"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
help
|
|
Input of 50MHz PHY clock on GPIO0.
|
|
|
|
config EXAMPLE_PHY_CLOCK_GPIO0_OUT
|
|
bool "GPIO0 Output"
|
|
help
|
|
Output the internal 50MHz RMII clock on GPIO0.
|
|
|
|
config EXAMPLE_PHY_CLOCK_GPIO16_OUT
|
|
bool "GPIO16 output"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
help
|
|
Output the internal 50MHz APLL clock on GPIO16.
|
|
|
|
config EXAMPLE_PHY_CLOCK_GPIO17_OUT
|
|
bool "GPIO17 output (inverted)"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
help
|
|
Output the internal 50MHz APLL clock on GPIO17 (inverted signal).
|
|
|
|
endchoice
|
|
|
|
config EXAMPLE_PHY_CLOCK_MODE
|
|
int
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default 0 if EXAMPLE_PHY_CLOCK_GPIO0_IN
|
|
default 1 if EXAMPLE_PHY_CLOCK_GPIO0_OUT
|
|
default 2 if EXAMPLE_PHY_CLOCK_GPIO16_OUT
|
|
default 3 if EXAMPLE_PHY_CLOCK_GPIO17_OUT
|
|
|
|
|
|
config EXAMPLE_PHY_USE_POWER_PIN
|
|
bool "Use PHY Power (enable/disable) pin"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default y
|
|
help
|
|
Use a GPIO "power pin" to power the PHY on/off during operation.
|
|
Consult the example README for more details
|
|
|
|
config EXAMPLE_PHY_POWER_PIN
|
|
int "PHY Power GPIO"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default 17
|
|
range 0 33
|
|
depends on EXAMPLE_PHY_USE_POWER_PIN
|
|
help
|
|
GPIO number to use for powering on/off the PHY.
|
|
|
|
config EXAMPLE_PHY_SMI_MDC_PIN
|
|
int "SMI MDC Pin"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default 23
|
|
range 0 33
|
|
help
|
|
GPIO number to use for SMI clock output MDC to PHY.
|
|
|
|
config EXAMPLE_PHY_SMI_MDIO_PIN
|
|
int "SMI MDIO Pin"
|
|
depends on EXAMPLE_CONNECT_ETHERNET
|
|
default 18
|
|
range 0 33
|
|
help
|
|
GPIO number to use for SMI data pin MDIO to/from PHY.
|
|
|
|
config EXAMPLE_CONNECT_IPV6
|
|
bool "Obtain IPv6 link-local address"
|
|
default y
|
|
help
|
|
By default, examples will wait until IPv4 and IPv6 addresses are obtained.
|
|
Disable this option if the network does not support IPv6.
|
|
|
|
endmenu
|