mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00

History

Michael (XIAO Xufeng) f7be540222 ci: partially enable example build for esp32c2		2022-06-02 14:17:31 +08:00
..
main	iperf: added Tx bandwidth limit option	2022-03-22 07:17:40 +00:00
CMakeLists.txt	tools: Increase the minimal supported CMake version to 3.16	2022-06-01 06:35:02 +00:00
iperf_test.py	Added bandwidth limitaion option to iperf test scripts	2022-03-22 07:17:40 +00:00
README.md	ci: partially enable example build for esp32c2	2022-06-02 14:17:31 +08:00
sdkconfig.ci.00	examples: fix sdkconfig warnings	2019-11-21 15:36:06 +01:00
sdkconfig.ci.01	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
sdkconfig.ci.02	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
sdkconfig.ci.03	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
sdkconfig.ci.04	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
sdkconfig.ci.05	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
sdkconfig.ci.06	examples: fix sdkconfig warnings	2019-11-21 15:36:06 +01:00
sdkconfig.ci.07	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.ci.99	test: support multiple targets for iperf example test	2021-05-20 16:58:38 +08:00
sdkconfig.defaults	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32c2	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32c3	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32s2	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32s3	soc: moved kconfig options out of the target component.	2022-04-21 12:09:43 +08:00

README.md

Supported Targets	ESP32	ESP32-S2	ESP32-S3	ESP32-C3	ESP32-C2

Iperf Example

Note about iperf version

The iperf example doesn't support all features in standard iperf. It's compitable with iperf version 2.x.

Note about 80MHz flash frequency

The iperf can get better throughput if the SPI flash frequency is set to 80MHz, but the system may crash in 80MHz mode for ESP-WROVER-KIT. Removing R140~R145 from the board can fix this issue. Currently the default SPI frequency is set to 40MHz, if you want to change the SPI flash frequency to 80MHz, please make sure R140~R145 are removed from ESP-WROVER-KIT or use ESP32 DevKitC.

Introduction

This example implements the protocol used by the common performance measurement tool iPerf. Performance can be measured between two ESP32s running this example, or between a single ESP32 and a computer running the iPerf tool

Demo steps to test station TCP Tx performance:

Build the iperf example with sdkconfig.defaults, which contains performance test specific configurations
Run the demo as station mode and join the target AP sta ssid password
Run iperf as server on AP side iperf -s -i 3
Run iperf as client on ESP32 side iperf -c 192.168.10.42 -i 3 -t 60

The console output, which is printed by station TCP RX throughput test, looks like:

esp32> sta aptest

I (5325) iperf: sta connecting to 'aptest'

esp32> I (6017) event: ip: 192.168.10.248, mask: 255.255.255.0, gw: 192.168.10.1

esp32> iperf -s -i 3 -t 1000

I (14958) iperf: mode=tcp-server sip=192.168.10.248:5001, dip=0.0.0.0:5001, interval=3, time=1000

Interval Bandwidth

esp32> accept: 192.168.10.42,62958

0- 3 sec 8.43 Mbits/sec

3- 6 sec 36.16 Mbits/sec

6- 9 sec 36.22 Mbits/sec

9- 12 sec 36.44 Mbits/sec

12- 15 sec 36.25 Mbits/sec

15- 18 sec 24.36 Mbits/sec

18- 21 sec 27.79 Mbits/sec

Steps to test station/soft-AP TCP/UDP RX/TX throughput are similar as test steps in station TCP TX.

See the README.md file in the upper level 'examples' directory for more information about examples.